![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Bigmoe's 65 GMC10 project.
I've been posting occasion pics of my project related to what ever I was needing advice on at the time, etc., but now that it's finally done I thought I'd post some pics of the entire project. It was 2 1/2 years in the making but over a year of that was at the body shop. I bought the truck as a basket case, a 65 GMC. The frame had been cleaned and painted and the cab had been at a reputable body shop to be prepped for paint. It came with two boxes and I also bought a parts truck. The 5.3LS motor I got from a written off 2008 Chev Tahoe that had only 69000km (43000 miles). My apologies for the ones that are upside down. I finally figured out which way to hold my iphone.
|
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
I acquired a square body front crossmember. 2 1/2" drop spindles.
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Exhaust holes through the crossmember and modified trans crossmember for exhaust.
|
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Engine plates. Ended up using 3rd hole set forward to clear the firewall.
Last edited by bigmoe; 11-17-2020 at 11:18 AM. |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Picked up some 2008 Odyssey second row seats. I ended up recessing the mounts to gain more headroom. (I'm 6'3) They can be popped out of the truck by just pulling a release handle.I removed the handles on the back of the seats so they would go back further and removed the inner arm rests. Console is from a newer Silverado.
Last edited by bigmoe; 11-17-2020 at 11:21 AM. |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Aftermarket mirrors from Ebay
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Progress in paint booth
|
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
RnD rad. Spal fan.
|
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Finished the back wall with a piece I got from an ?04 F150 std cab and some Kydex plastic I formed for the corners.
Last edited by bigmoe; 09-12-2020 at 02:04 PM. |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
motor goes in
|
![]() |
![]() |
![]() |
#11 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
I used an in cab recirculating heater because I didn't like the Deluxe heater in the engine bay. I had to modify the glove box because it was hitting the heater assembly.
|
![]() |
![]() |
![]() |
#12 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Made some licence plate brackets to center the plate.
|
![]() |
![]() |
![]() |
#13 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
I applied vinyl stripe. The truck had no trim holes so we didn't know where to paint the stripe.
|
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
I used an Art Carr/Winters shifter. Cable actuated made it easier to position. It also has neutral safety and reverse switches.
|
![]() |
![]() |
![]() |
#15 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Trim applied with 3M tape
|
![]() |
![]() |
![]() |
#16 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
All done!
The wheels are 17 x 8 with 4 1/2" backspace. I have a square body rear end that is 3/4" wider per side. 235-60-17 and 255-60-17 2 1/2" drop spindles and stock springs in front and Jeep 97-06 rear coils (ACDelco 45H2104) Last edited by bigmoe; 09-12-2020 at 02:25 PM. |
![]() |
![]() |
![]() |
#17 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
72 bumper
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jan 2012
Location: Preston Idaho
Posts: 277
|
Re: Bigmoe's 65 GMC10 project.
Wow looks good, is that a homemade fan shroud?
|
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
|
![]() |
![]() |
![]() |
#20 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Went with a Dakota Digital universal dash with BIM module. Just plugs into the OBD II port.
|
![]() |
![]() |
![]() |
#21 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Engine bay
|
![]() |
![]() |
![]() |
#22 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Tanks Inc USPT-GH 15 gallon gas tank. I was going to fill up the middle thruogh the wood but ended up using the fill neck on the side, through the frame, to the corner of the box.
Last edited by bigmoe; 12-28-2020 at 03:54 PM. Reason: add more |
![]() |
![]() |
![]() |
#23 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Bigmoe's 65 GMC10 project.
Truck looks great!
__________________
Karl ![]() 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
![]() |
![]() |
![]() |
#24 |
Registered User
![]() Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 956
|
Re: Bigmoe's 65 GMC10 project.
Filler in the corner of the box. Filling it is slowed, probably because of the 45 degree elbow, but it's not too bad.
|
![]() |
![]() |
![]() |
#25 |
Moderator
![]() ![]() Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Bigmoe's 65 GMC10 project.
Man that's looking sweet!
Love those license plate mounts. I'm going to make a pair for mine. ![]()
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
![]() |
![]() |
![]() |
Bookmarks |
|
|