Air Ride Switch Box - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JHickson6 · 04-25-2003, 06:56 PM

Does anoyone have the wiring dagram for the 10 way switchbox used for air ride and hydraulic setups. It's for front/back, side/side, corners, pancake up/down, i think that's all it does, anyways, i've seen a diagram somewhere but wodering if anyone has it to share.

Thanks

Jared

JHickson6 · 04-25-2003, 07:04 PM

Here ya go Jared, you must be an idiot cuz you just found it within a few minutes. http://www.aimind.com/TRUCK-INSTRUCTIONS.html

phantom dually · 04-28-2003, 11:14 PM

I have a new one I will sell for $75 from air ride tech

JHickson6 · 04-29-2003, 01:52 AM

Nah it's cool i'm working on a different setup all together, it's gonna be sweet!! but i doubt it'll all be done until next year. WAY BETTER THAN PLAYSTATION CONTROLLER!

full foot notch · 04-29-2003, 03:41 AM

ive already done a setup where i use a joystick to control it, its pretty damn pimp, even built a solenoid controll box where i can slowly move the joystick and it chatters the valve open and close real quick almost like a gimble effect

JHickson6 · 04-29-2003, 01:30 PM

Any pics of that setup? I was thinking something along those lines? Wanna share your secrets? PLEEEEAAAAASSSSSEEEEE!

Any info would be greatly appreciated!!

Jared

full foot notch · 04-30-2003, 01:01 AM

all i gotta say is grab some proto board, 26 or 28 guarge wire, and the soldering iron, and rewire the joystick, its not that hard

now as for the solenoid controller board, im takin that one to teh grave, but hell, you can get any electronics guru to build one for you

JHickson6 · 04-30-2003, 01:12 AM

A few more questions for you then please. When your joystick is centered are the bags full? ride height? or empty? and what do you have to control the return pressure to the bag so that when the joystick is released from a position, other than center, that the bag fills back up? and what stops the pressure when the bag fills?

Much appreciated

Jared

full foot notch · 04-30-2003, 04:11 PM

on the honda that i did the setup on(hey, it was still in the shop and i made a deal with the owner to try a new setup, since it was getting audio done at a buddies shop)

but when the joystick recenters it stays where it was (still working on a board to reset and maintain setup),but when i rewired the joystick, i made it so that teh top button is the all fill button, so it doesnt seem to be tedious to reset the system manually, its a prettybasic setup right now, but since my knowledge stops at basic IC schips, im getting a buddy to make boards that will do better and reset it(hint computer programmed and computer upgradable, and will have a LCD display (since a joystick is a X/Y/Z setup, he just has to make a table of values for the ICs to understand)

what im really wanting to do is get one of the old nintindo game gloves and rewire that

(ya know, that monstrocity that went 1/2 up the forearm and you could move your hand for the different controls)

04-25-2003, 06:56 PM	#1
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	Air Ride Switch Box Does anoyone have the wiring dagram for the 10 way switchbox used for air ride and hydraulic setups. It's for front/back, side/side, corners, pancake up/down, i think that's all it does, anyways, i've seen a diagram somewhere but wodering if anyone has it to share. Thanks Jared __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

04-25-2003, 07:04 PM	#2
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	Here ya go Jared, you must be an idiot cuz you just found it within a few minutes. http://www.aimind.com/TRUCK-INSTRUCTIONS.html __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

04-28-2003, 11:14 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	I have a new one I will sell for $75 from air ride tech __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

04-29-2003, 01:52 AM	#4
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	Nah it's cool i'm working on a different setup all together, it's gonna be sweet!! but i doubt it'll all be done until next year. WAY BETTER THAN PLAYSTATION CONTROLLER! __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

04-29-2003, 01:30 PM	#6
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	Any pics of that setup? I was thinking something along those lines? Wanna share your secrets? PLEEEEAAAAASSSSSEEEEE! Any info would be greatly appreciated!! Jared __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

04-29-2003, 03:41 AM	#5
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	ive already done a setup where i use a joystick to control it, its pretty damn pimp, even built a solenoid controll box where i can slowly move the joystick and it chatters the valve open and close real quick almost like a gimble effect

04-30-2003, 01:01 AM	#7
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	all i gotta say is grab some proto board, 26 or 28 guarge wire, and the soldering iron, and rewire the joystick, its not that hard now as for the solenoid controller board, im takin that one to teh grave, but hell, you can get any electronics guru to build one for you

04-30-2003, 01:12 AM	#8
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	A few more questions for you then please. When your joystick is centered are the bags full? ride height? or empty? and what do you have to control the return pressure to the bag so that when the joystick is released from a position, other than center, that the bag fills back up? and what stops the pressure when the bag fills? Much appreciated Jared __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

04-30-2003, 04:11 PM	#9
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	on the honda that i did the setup on(hey, it was still in the shop and i made a deal with the owner to try a new setup, since it was getting audio done at a buddies shop) but when the joystick recenters it stays where it was (still working on a board to reset and maintain setup),but when i rewired the joystick, i made it so that teh top button is the all fill button, so it doesnt seem to be tedious to reset the system manually, its a prettybasic setup right now, but since my knowledge stops at basic IC schips, im getting a buddy to make boards that will do better and reset it(hint computer programmed and computer upgradable, and will have a LCD display (since a joystick is a X/Y/Z setup, he just has to make a table of values for the ICs to understand) what im really wanting to do is get one of the old nintindo game gloves and rewire that (ya know, that monstrocity that went 1/2 up the forearm and you could move your hand for the different controls)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.