AZ 1969-72 McGaughy's 2.5" drop spindles w 5 bolt discs

[69Tom]

McGaughy's 2.5" drop spindles w/new disc brake rotors and bearings. 5-bolt. Never used. Has surface rust but can easily be removed. Were put together simply for a mockup.

[SOLD]

[FIREBALL]

Arghhh, wish u were closer to me I'd nab these!

[Heliarcn]

I'll take them if you decide to ship. I'm just up the road in Las Vegas.

[69Tom]

Originally Posted by Heliarcn

I'll take them if you decide to ship. I'm just up the road in Las Vegas.

Bret, I don't have trouble shipping them but they're really heavy and would have to be shipped in 2 boxes.

[Heliarcn]

Originally Posted by 69Tom

Bret, I don't have trouble shipping them but they're really heavy and would have to be shipped in 2 boxes.

Can you provide a quote shipped to 89149?
Posted via Mobile Device

[69Tom]

Originally Posted by Heliarcn

Can you provide a quote shipped to 89149?
Posted via Mobile Device

It'll be a few days before I'm able to get to them. In the meantime, I'd still prefer to sell them local.

[Heliarcn]

No problem, I'm in no hurry.

[lolife99]

Just to be clear,... what year balljoints do these spindles fit?
60-62
63-70
71-72
73-87

[michael bustamante]

if you ship, tape the heck out of these boxes!! i bought some rotors and the shipper used a flat rate box and didnt reinforce it andf the boxes were shredded and rotors all marred up

[69Tom]

Originally Posted by lolife99

Just to be clear,... what year balljoints do these spindles fit?
60-62
63-70
71-72
73-87

Hi, I believe they're 71-72, although I am not 100% certain. I bought them off a member here on the boards. Is there a way I can measure or check?

[69Tom]

Originally Posted by michael bustamante

if you ship, tape the heck out of these boxes!! i bought some rotors and the shipper used a flat rate box and didnt reinforce it andf the boxes were shredded and rotors all marred up

Yeah, I have to probably double box as well. Hence why I didn't want to ship. But if I have to.....

[lolife99]

Originally Posted by 69Tom

Hi, I believe they're 71-72, although I am not 100% certain. I bought them off a member here on the boards. Is there a way I can measure or check?

Take them to your local auto parts store.
Find out the correct upper ball joint or tie rod for your spindles and you will know what year truck they were made for.
Just trying to save you an unhappy buyer.

I bought a set of new 71-72 drop spindles for $100.
But after changing upper and lower ball joints outer tie rods and conversion tie rod sleeves to make them fit my '69,... It wasn't such a cheap purchase.

[68 Four on the Floor]

That's why the 63-70 ones are the way to go. It was more cost effective for me to buy drop spindles and completely rebuild my front suspension for my 68 than it would have been to run. 71 spindles and get the balljoints. Sorry to thread jack.

[69Tom]

Bolt pattern on rotors is 5 x 5". Holding off on shipping. Thanks.