Calling all motor builders help!!!!!!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969stepside · 12-03-2008, 11:06 PM

i have a 1967 chevy 327 out of a camaro. the oilfilter that was on this motor was a canister and i want to change it to a spin on style. i know i need a conversion kit to do this but there is a peice that i need to get but i dont know what it is called, if it is even made anymore, or if i can find it. if there is some of you all that have done this conversion on this motor please chime in here is a pic of the mystery part that i need to id and go from there

this part id off the orginal canister this goes inbetween the block and the oil filter

pleas help me!!!!!!!!!!!!!!!!!

ostncoln · 12-03-2008, 11:14 PM

is it not this piece that comes with the kit? idk

LINK

my67chevytruck · 12-04-2008, 12:12 AM

Quote:

Originally Posted by ostncoln

is it not this piece that comes with the kit? idk

LINK

I used this one years ago, and have not had any problems with it.

Cyclone · 12-03-2008, 11:15 PM

Heres a new one.
Better value.
Use this and you dont need the part you pictured.

1969stepside · 12-03-2008, 11:19 PM

is that the same thing?

Cyclone · 12-03-2008, 11:21 PM

If you use the Speedway one, you don't need that part.

1969stepside · 12-03-2008, 11:58 PM

has anyone done this before?

Cyclone · 12-04-2008, 12:05 AM

Here's some instructions for an early style kit.

1969stepside · 12-04-2008, 12:08 AM

so i do need that part from ecklers

Cyclone · 12-04-2008, 12:11 AM

Yes if your using that style of adapter. No, if your using the Speedway type.

1969stepside · 12-04-2008, 12:23 AM

well my machienest said that i needed that part that i pictured so i donk know what to do

Cyclone · 12-04-2008, 12:26 AM

Then buy this, its the same part you pictured, just upside down.

woodridge · 12-04-2008, 09:18 AM

Quote:

Originally Posted by 1969stepside

well my machienest said that i needed that part that i pictured so i donk know what to do

The Speedway piece does not need the OE plate. It is a complete kit to update to a spin-on.

*chevy29267truck* · 12-04-2008, 12:27 AM

Go too www.northernautoparts.com or 1800.831.0884

pcwillsie · 12-04-2008, 10:50 AM

the kit you are looking for is made my mr gasket and the part number is 1270

pcwillsie · 12-04-2008, 10:51 AM

oh and it uses a wix 51069 oil filter once installed

1969stepside · 12-04-2008, 01:15 PM

how does the speed way one work?

12-03-2008, 11:06 PM	#1
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Calling all motor builders help!!!!!!!!!! i have a 1967 chevy 327 out of a camaro. the oilfilter that was on this motor was a canister and i want to change it to a spin on style. i know i need a conversion kit to do this but there is a peice that i need to get but i dont know what it is called, if it is even made anymore, or if i can find it. if there is some of you all that have done this conversion on this motor please chime in here is a pic of the mystery part that i need to id and go from there this part id off the orginal canister this goes inbetween the block and the oil filter pleas help me!!!!!!!!!!!!!!!!! __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

12-03-2008, 11:14 PM	#2
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: Calling all motor builders help!!!!!!!!!! is it not this piece that comes with the kit? idk LINK __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread Last edited by ostncoln; 12-03-2008 at 11:15 PM.

12-03-2008, 11:15 PM	#4
Cyclone Registered User Join Date: Oct 2004 Location: Sonoma, CA Posts: 319	Re: Calling all motor builders help!!!!!!!!!! Heres a new one. Better value. Use this and you dont need the part you pictured. Last edited by Cyclone; 12-03-2008 at 11:19 PM.

12-03-2008, 11:19 PM	#5
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: Calling all motor builders help!!!!!!!!!! is that the same thing? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

12-03-2008, 11:21 PM	#6
Cyclone Registered User Join Date: Oct 2004 Location: Sonoma, CA Posts: 319	Re: Calling all motor builders help!!!!!!!!!! If you use the Speedway one, you don't need that part. Last edited by Cyclone; 12-03-2008 at 11:21 PM.

12-03-2008, 11:58 PM	#7
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: Calling all motor builders help!!!!!!!!!! has anyone done this before? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

12-04-2008, 12:05 AM	#8
Cyclone Registered User Join Date: Oct 2004 Location: Sonoma, CA Posts: 319	Re: Calling all motor builders help!!!!!!!!!! Here's some instructions for an early style kit.

12-04-2008, 12:08 AM	#9
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: Calling all motor builders help!!!!!!!!!! so i do need that part from ecklers __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

12-04-2008, 12:11 AM	#10
Cyclone Registered User Join Date: Oct 2004 Location: Sonoma, CA Posts: 319	Re: Calling all motor builders help!!!!!!!!!! Yes if your using that style of adapter. No, if your using the Speedway type.

12-04-2008, 12:23 AM	#11
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: Calling all motor builders help!!!!!!!!!! well my machienest said that i needed that part that i pictured so i donk know what to do __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

12-04-2008, 12:26 AM	#12
Cyclone Registered User Join Date: Oct 2004 Location: Sonoma, CA Posts: 319	Re: Calling all motor builders help!!!!!!!!!! Then buy this, its the same part you pictured, just upside down.

12-04-2008, 12:27 AM	#14
chevy29267truck Account Suspended Join Date: Sep 2008 Location: Alva Florida Posts: 668	Re: Calling all motor builders help!!!!!!!!!! Go too www.northernautoparts.com or 1800.831.0884

12-04-2008, 10:50 AM	#15
pcwillsie Registered User Join Date: Mar 2007 Location: oklahoma Posts: 118	Re: Calling all motor builders help!!!!!!!!!! the kit you are looking for is made my mr gasket and the part number is 1270

12-04-2008, 10:51 AM	#16
pcwillsie Registered User Join Date: Mar 2007 Location: oklahoma Posts: 118	Re: Calling all motor builders help!!!!!!!!!! oh and it uses a wix 51069 oil filter once installed

12-04-2008, 01:15 PM	#17
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: Calling all motor builders help!!!!!!!!!! how does the speed way one work? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.