powersteering pics? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

corn · 08-28-2005, 11:35 PM

Does anyone have a picture or 3 of a small block with power steering that they can post? I converted my sons 69 to a small block from a big block & I dont think the pump will fit the truck even with different brackets. His had the resevoir style tank. Thanks for any help...corn

JimKshortstep4x4 · 08-29-2005, 07:44 AM

Adapting the big block PS pump may be very difficult. I would suggest getting the pump and brackets for a small block to match the setup on your engine.

Since you changed out the engine it is also important to know if the engine has a short water pump or long water pump. It is posssible to end up with off-set pulleys when the wrong parts are used together. Piecing together power steering/pulley sets can be frustrating.

If you have a stock 69 small block engine with the original water pump then a picture or pictures can be posted.

Let us know what you have.

Jim

68Stepbed · 08-29-2005, 01:52 PM

Not the best but these might help. If I were you I'd go with the Alan Grove bracket. The pump should be the same.

corn · 08-29-2005, 07:15 PM

Thanks guys. I am running a long pump on it. I have a pump from my 84 but the hoses are the o-ring style & the steering box is set up for the inverted flare lines. Ill keep digging. Anyone need a big block (short water pump) steering pump?

JimKshortstep4x4 · 08-29-2005, 08:36 PM

Here is a pic of a power steering pump from the mid 70's on a sbc in one of these trucks. It is the for long water pump setup.

Jim

alf1096 · 08-29-2005, 08:42 PM

How do you shrink your pics down to where they are under the 100k

JimKshortstep4x4 · 08-29-2005, 09:17 PM

alf1096,

I use a program for pictures, "Camedia" and it is very easy with this program. It has an "Image Resize" which is used to decrease the pixal size. Sometimes I get rejected for oversize but it is a simple matter of redoing the size with the program.

The "Camedia" program came with my Olympus camera.

Jim

knsmodels · 08-30-2005, 09:40 AM

How much you want for the power steering setup you took off of the big block??

08-28-2005, 11:35 PM	#1
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	powersteering pics? Does anyone have a picture or 3 of a small block with power steering that they can post? I converted my sons 69 to a small block from a big block & I dont think the pump will fit the truck even with different brackets. His had the resevoir style tank. Thanks for any help...corn

08-29-2005, 01:52 PM	#3
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Not the best but these might help. If I were you I'd go with the Alan Grove bracket. The pump should be the same. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system Last edited by 68Stepbed; 10-04-2007 at 10:31 PM.

08-29-2005, 08:36 PM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Here is a pic of a power steering pump from the mid 70's on a sbc in one of these trucks. It is the for long water pump setup. Jim Attached Images

08-30-2005, 09:40 AM	#8
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	How much you want for the power steering setup you took off of the big block?? __________________ Click to see what I do 1972 LWB K10 350/4 sp 1968 SS Chevelle 396/tremac5spd

08-29-2005, 07:44 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Adapting the big block PS pump may be very difficult. I would suggest getting the pump and brackets for a small block to match the setup on your engine. Since you changed out the engine it is also important to know if the engine has a short water pump or long water pump. It is posssible to end up with off-set pulleys when the wrong parts are used together. Piecing together power steering/pulley sets can be frustrating. If you have a stock 69 small block engine with the original water pump then a picture or pictures can be posted. Let us know what you have. Jim

08-29-2005, 07:15 PM	#4
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Thanks guys. I am running a long pump on it. I have a pump from my 84 but the hoses are the o-ring style & the steering box is set up for the inverted flare lines. Ill keep digging. Anyone need a big block (short water pump) steering pump?

08-29-2005, 08:42 PM	#6
alf1096 Registered User Join Date: Aug 2005 Location: Texas Posts: 124	How do you shrink your pics down to where they are under the 100k

08-29-2005, 09:17 PM	#7
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	alf1096, I use a program for pictures, "Camedia" and it is very easy with this program. It has an "Image Resize" which is used to decrease the pixal size. Sometimes I get rejected for oversize but it is a simple matter of redoing the size with the program. The "Camedia" program came with my Olympus camera. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.