OR F/S GM NOS & New Repro Steering Column Replacement Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Bowties** · 09-13-2022, 06:26 PM

We just pulled out a few replacement steering column parts for another member and have the below pictured extras bench top/ready to ship. We can ship any of the below parts in the CONUS for $7. via USPS small package and since all of these items are small we can combine multiple parts and send for the one shipping charge, we can also ship parts out using the USPS priority flat rate boxes in case you want to add or request any other needed column parts not pictured. If interested funds can be sent online via Zelle, CashApp and Venmo or Check/Money Order by mail. Thanks for looking, Mel

#1 } NOS upper column bearing for non-tilt. $50. ***Qty. 4 Sold/Shipped*** Have more on hand/available...

#2 } NOS lower column bearing for tilt or non-tilt. $65. ***Qty. 6 Sold/Shipped*** Have more on hand/available...

#3 } NOS horn contact t/s cancel cam for non-tilt. $30. ***Qty. 2 Sold/Shipped*** Have more on hand/available...

#4 } NORS horn contact pin, spring & retainer kit. $20. ***Qty. 5 Sold/Shipped*** Have more on hand/available...

#5 } Repro horn contact t/s cancel cam for non-tilt. $15. ***Qty. 3 Sold/Shipped*** Have more on hand/available...

#6 } Repro horn contact pin, spring & retainer kit. $8. ***Qty. 3 Sold/Shipped*** Have more on hand/available...

#7 } NOS shift indicator fiber optic cable bulb socket for non-tilt. $35. ***Part & pics added 09/15/24 in post #49***

#8 } OE used shift indicator fiber optic cable bulb socket for non-tilt, tested w/bulb. $18. ***Part & pics added 09/15/24 in post #49***

.

**jmader** · 09-14-2022, 05:45 AM

I'll take the NOS cancel cam and spring kit

**Classic Bowties** · 09-14-2022, 08:51 AM

Quote:

Originally Posted by jmader

I'll take the NOS cancel cam and spring kit

Okay, the total and payment info for sending of funds via paypal has been forwarded on Wed. 09/14,
please confirm your full shipping address and we'll get the parts ready for shipment. Thanks, Mel

**Classic Bowties** · 09-15-2022, 01:00 AM

Quote:

Originally Posted by jmader

I'll take the NOS cancel cam and spring kit

Your column parts have been shipped off, the package went out via USPS first class on Wed. 09/14 and your expected delivery
day is Mon. 09/19. Thanks again for your order and let me know if we can help with any other 67-72 parts needs. Mel

**CKfan** · 03-03-2023, 11:17 PM

Quote:
Originally Posted by Classic Bowties View Post
We can offer/supply the upper rubber washer bushing and the lower plastic wear bushing both in GM NOS, if interested post a reply in the below linked column parts f/s thread and we'll get the two parts pulled out and pictured for you. Mel

http://67-72chevytrucks.com/vboard/s...d.php?t=838093

Need the upper rubber washer bushing if you have one. $?
Thanks

**Classic Bowties** · 03-04-2023, 02:28 AM

Quote:

Originally Posted by CKfan

Quote:
Originally Posted by Classic Bowties View Post
We can offer/supply the upper rubber washer bushing and the lower plastic wear bushing both in GM NOS, if interested post a reply in the below linked column parts f/s thread and we'll get the two parts pulled out and pictured for you. Mel

http://67-72chevytrucks.com/vboard/s...d.php?t=838093

Need the upper rubber washer bushing if you have one. $?
Thanks

CKfan, here are the requested wear parts for your 1969 non-tilt 4 speed/floor shift steering column, am just now seeing that you've found the lower plastic wear bushing after taking these pics so disregard the NOS plastic bushings, we can offer you the upper rubber washer bushings in GM NOS for $15. ea + $6. for CONUS shipment. Lmk, Mel

.

**CKfan** · 03-04-2023, 12:51 PM

Will take 1 upper bushing rubber please.
Thank you for the response.

**Classic Bowties** · 03-04-2023, 01:43 PM

Quote:

Originally Posted by CKfan

Will take 1 upper bushing rubber please.
Thank you for the response.

Okay, the total and payment info for sending of funds via paypal has been forwarded on Sat. 03/04, please confirm your full shipping address and we'll get the part ready for shipment. Thanks, Mel

**Classic Bowties** · 03-04-2023, 10:43 PM

Quote:

Originally Posted by CKfan

Will take 1 upper bushing rubber please.

Your upper steering column NOS rubber washer/bushing has been shipped off, the package went out via USPS first class on Sat. 03/04 and your expected delivery day is Tue. 03/07. Thanks again for your order and let me know if we can help with any other 67-72 parts needs. Mel

**CKfan** · 03-04-2023, 10:57 PM

Thank you very much.

**CKfan** · 03-09-2023, 07:41 PM

Hi Mel, would like NOS lower column bearing (non tilt) 67-72 please. Item number 2 as shown above.

Thanks

**Classic Bowties** · 03-09-2023, 08:30 PM

Quote:

Originally Posted by CKfan

Hi Mel, would like NOS lower column bearing (non tilt) 67-72 please. Item number 2 as shown above.

Thanks

Okay, we can get a #2/GM NOS lower column bearing headed your way, the total and payment info for sending of funds via paypal has been forwarded on Thu. 03/09, please confirm your full shipping address and we'll get the part ready for shipment. Thanks again, Mel

**CKfan** · 03-09-2023, 10:44 PM

Payment sent.

Also, received the NOS upper column rubber bushing in excellent condition. Thanks.

**Classic Bowties** · 03-10-2023, 10:20 PM

Quote:

Originally Posted by CKfan

Payment sent.

Also, received the NOS upper column rubber bushing in excellent condition. Thanks.

The #2/GM NOS lower column bearing has been shipped off, your package went out via USPS first class on Fri. 03/10 and the expected delivery day is Mon. 03/13. Thanks again for your order and repeat business, let me know if we can help with any other 67-72 parts needs. Mel

**CKfan** · 03-13-2023, 04:59 PM

Received lower column bearing. Shipped fast, packaged great and a perfect fit. Thank you!

**lkt1954** · 07-29-2023, 05:52 PM

Do you have any of the brackets that hold the column to the dash?
Thanks

**Classic Bowties** · 07-29-2023, 06:04 PM

Quote:

Originally Posted by lkt1954

Do you have any of the brackets that hold the column to the dash?
Thanks

Yes, we can get a set of OE used steering column install brackets headed your way, let me grab you some pics and pricing. Mel

**Classic Bowties** · 08-04-2023, 12:17 AM

Quote:

Originally Posted by lkt1954

Do you have any of the brackets that hold the column to the dash?
Thanks

We just got the OE steering column install hardware/bracketry pulled out and listed in the below linked parts board f/s thread. Have a look and let us know, Mel

http://67-72chevytrucks.com/vboard/s...d.php?t=846472

.

**chev-obsession** · 08-06-2023, 11:34 AM

I will take one NOS lower tilt column bearing

**Classic Bowties** · 08-06-2023, 12:48 PM

Quote:

Originally Posted by chev-obsession

I will take one NOS lower tilt column bearing

Okay, the total and payment info for sending of funds via paypal has been forwarded on Sun. 08/06, please confirm your full shipping address and we'll get the part ready for shipment. Thanks again, Mel

**Classic Bowties** · 08-07-2023, 11:28 PM

Quote:

Originally Posted by chev-obsession

I will take one NOS lower tilt column bearing

Your GM NOS lower column bearing has been shipped off, the package went out via USPS ground advantage on Mon. 08/07 and your expected delivery day is this Wed. 08/09. Thanks again for your order and repeat business, let me know if we can help with any other 67-72 parts needs. Mel

**Classic Bowties** · 08-15-2023, 01:46 AM

Adding this new repro tilt column 4 spd/overdrive shift indicator dial lens for member steves1967, will offer the shift lens to you for $15. shipped and our payment options are listed in the first post at top of thread. We also have the matching tilt column specific shift indicator pointer and shift indicator lens housing available in new repro and can combine ship all if needed. Mel

.

**Classic Bowties** · 08-15-2023, 07:41 PM

sloGMC, here are some pics of the OE used tilt column shift indicator dial lamp steel cap & plastic filter setup that we can get headed your way, the other lamp cap/filter set marked sold has been shipped off to member Richard. The lamp filter parts are $25. + $6. for CONUS shipping ***Qty. 2 Sold/Shipped***, the total and payment info for sending of funds via paypal has been forwarded on Tue. 08/15, please confirm your full shipping address and we'll get the parts ready for shipment. Thanks, Mel

.

**sloGMC** · 08-16-2023, 10:08 PM

Quote:

Originally Posted by Classic Bowties

sloGMC, here are some pics of the OE used tilt column shift indicator dial lamp cap/filter setup that we can get headed your way, the other lamp cap/filter set marked sold has been shipped off to member Richard. The pair of lamp filter parts are $25. + $6. for CONUS shipping, the total and payment info for sending of funds via paypal has been forwarded on Tue. 08/15, please confirm your full shipping address and we'll get the parts ready for shipment. Thanks, Mel

.

Thank you. Since it appears I actually do have one installed in my tilt (albeit, amber) I will pass for now. I would feel bad hoarding two.

**EdwardSams** · 09-03-2023, 08:41 PM

Good evening.

I’ll please take one of each of the following. Thx!

#5 / Repro horn contact t/s cancel cam for non-tilt. $13. ***Qty. 1 Sold/Shipped*** Have 2 more on hand/available...

#6 / Repro horn contact pin, spring & retainer kit. $7. ***Qty. 1 Sold/Shipped*** Have 2 more on hand/available...

.

03-04-2023, 10:57 PM	#10
CKfan Senior Member Join Date: Nov 2022 Location: CA Posts: 292	Re: F/S GM NOS & New Repro Steering Column Replacement Parts Thank you very much.

03-09-2023, 07:41 PM	#11
CKfan Senior Member Join Date: Nov 2022 Location: CA Posts: 292	Re: F/S GM NOS & New Repro Steering Column Replacement Parts Hi Mel, would like NOS lower column bearing (non tilt) 67-72 please. Item number 2 as shown above. Thanks

03-09-2023, 10:44 PM	#13
CKfan Senior Member Join Date: Nov 2022 Location: CA Posts: 292	Re: F/S GM NOS & New Repro Steering Column Replacement Parts Payment sent. Also, received the NOS upper column rubber bushing in excellent condition. Thanks.

03-13-2023, 04:59 PM	#15
CKfan Senior Member Join Date: Nov 2022 Location: CA Posts: 292	Re: F/S GM NOS & New Repro Steering Column Replacement Parts Received lower column bearing. Shipped fast, packaged great and a perfect fit. Thank you!

07-29-2023, 05:52 PM	#16
lkt1954 Senior Member Join Date: Dec 2007 Location: Dumas, Texas Posts: 209	Re: F/S GM NOS & New Repro Steering Column Replacement Parts Do you have any of the brackets that hold the column to the dash? Thanks

09-13-2022, 06:26 PM	#1
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,683	F/S GM NOS & New Repro Steering Column Replacement Parts We just pulled out a few replacement steering column parts for another member and have the below pictured extras bench top/ready to ship. We can ship any of the below parts in the CONUS for $7. via USPS small package and since all of these items are small we can combine multiple parts and send for the one shipping charge, we can also ship parts out using the USPS priority flat rate boxes in case you want to add or request any other needed column parts not pictured. If interested funds can be sent online via Zelle, CashApp and Venmo or Check/Money Order by mail. Thanks for looking, Mel #1 } NOS upper column bearing for non-tilt. $50. *Qty. 4 Sold/Shipped* Have more on hand/available... #2 } NOS lower column bearing for tilt or non-tilt. $65. *Qty. 6 Sold/Shipped* Have more on hand/available... #3 } NOS horn contact t/s cancel cam for non-tilt. $30. *Qty. 2 Sold/Shipped* Have more on hand/available... #4 } NORS horn contact pin, spring & retainer kit. $20. *Qty. 5 Sold/Shipped* Have more on hand/available... #5 } Repro horn contact t/s cancel cam for non-tilt. $15. *Qty. 3 Sold/Shipped* Have more on hand/available... #6 } Repro horn contact pin, spring & retainer kit. $8. *Qty. 3 Sold/Shipped* Have more on hand/available... #7 } NOS shift indicator fiber optic cable bulb socket for non-tilt. $35. *Part & pics added 09/15/24 in post #49* #8 } OE used shift indicator fiber optic cable bulb socket for non-tilt, tested w/bulb. $18. *Part & pics added 09/15/24 in post #49* . Attached Images __________________ *For any return/past customers & friends* Before sending of any funds, please wait for a confirmed total and instructions for sending as our payment account info has been changed as of Jan. 2023. Thanks... Last edited by Classic Bowties; 10-22-2024 at 12:41 PM.

09-14-2022, 05:45 AM	#2
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: F/S GM NOS & New Repro Steering Column Replacement Parts I'll take the NOS cancel cam and spring kit __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

03-03-2023, 11:17 PM	#5
CKfan Senior Member Join Date: Nov 2022 Location: CA Posts: 292	Re: F/S GM NOS & New Repro Steering Column Replacement Parts Quote: Originally Posted by Classic Bowties View Post We can offer/supply the upper rubber washer bushing and the lower plastic wear bushing both in GM NOS, if interested post a reply in the below linked column parts f/s thread and we'll get the two parts pulled out and pictured for you. Mel http://67-72chevytrucks.com/vboard/s...d.php?t=838093 Need the upper rubber washer bushing if you have one. $? Thanks

03-04-2023, 12:51 PM	#7
CKfan Senior Member Join Date: Nov 2022 Location: CA Posts: 292	Re: F/S GM NOS & New Repro Steering Column Replacement Parts Will take 1 upper bushing rubber please. Thank you for the response.

08-06-2023, 11:34 AM	#19
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,511	Re: F/S GM NOS & New Repro Steering Column Replacement Parts I will take one NOS lower tilt column bearing __________________ 1965 c/10 swb 1969 c/10 lwb

08-15-2023, 01:46 AM	#22
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,683	Re: F/S GM NOS & New Repro Steering Column Replacement Parts Adding this new repro tilt column 4 spd/overdrive shift indicator dial lens for member steves1967, will offer the shift lens to you for $15. shipped and our payment options are listed in the first post at top of thread. We also have the matching tilt column specific shift indicator pointer and shift indicator lens housing available in new repro and can combine ship all if needed. Mel . Attached Images __________________ *For any return/past customers & friends* Before sending of any funds, please wait for a confirmed total and instructions for sending as our payment account info has been changed as of Jan. 2023. Thanks...

08-15-2023, 07:41 PM	#23
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,683	Re: F/S GM NOS & New Repro Steering Column Replacement Parts sloGMC, here are some pics of the OE used tilt column shift indicator dial lamp steel cap & plastic filter setup that we can get headed your way, the other lamp cap/filter set marked sold has been shipped off to member Richard. The lamp filter parts are $25. + $6. for CONUS shipping *Qty. 2 Sold/Shipped, the total and payment info for sending of funds via paypal has been forwarded on Tue. 08/15, please confirm your full shipping address and we'll get the parts ready for shipment. Thanks, Mel . Attached Images __________________ For any return/past customers & friends* Before sending of any funds, please wait for a confirmed total and instructions for sending as our payment account info has been changed as of Jan. 2023. Thanks... Last edited by Classic Bowties; 09-17-2023 at 12:06 AM. Reason: Availability update

09-03-2023, 08:41 PM	#25
EdwardSams Senior Member Join Date: Aug 2018 Location: Long Island, NY Posts: 236	Re: F/S GM NOS & New Repro Steering Column Replacement Parts Good evening. I’ll please take one of each of the following. Thx! #5 / Repro horn contact t/s cancel cam for non-tilt. $13. *Qty. 1 Sold/Shipped* Have 2 more on hand/available... #6 / Repro horn contact pin, spring & retainer kit. $7. *Qty. 1 Sold/Shipped* Have 2 more on hand/available... .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.