how much to send in a 350 to be rebuilt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pumkin Truck · 04-10-2003, 10:36 PM

rather than buying a running rebuilt one cause now we are seriously considering sending in my dads 350 he has in his rusty '48. Thanks all.
ps and it would bolt up to my 3spd right. and how long would that last considering the 350 would be factory 2brl.

Pumkin Truck · 04-11-2003, 08:43 PM

come on guys, help a fellow member out.

lpaine · 04-11-2003, 09:57 PM

Not really sure what you're asking- I think you need to be a little more specific

Pumkin Truck · 04-11-2003, 09:59 PM

Just a factory rebuild, the motor is from a 72 impala 2brl. just a simple rebuild to get it running, the motor was running smooth when he put it in his truck but it was never started for over 10 years.
thnx

Hutch · 04-11-2003, 10:14 PM

I would expect a long block to be about 8 hundred after adding in accesories.
Here is a link to a place that I have used in the past with good results.
Last time I had a motor rebuilt here they had it done in a couple of days but you had to pay with green cash.
Always be sure that you can identify you parts as they may try to slip in somebodys elses parts.

http://www.citymotorsupply.com/

Have fun

04-10-2003, 10:36 PM	#1
Pumkin Truck Thats just prime! Join Date: Mar 2002 Location: TEXAS Posts: 720	how much to send in a 350 to be rebuilt rather than buying a running rebuilt one cause now we are seriously considering sending in my dads 350 he has in his rusty '48. Thanks all. ps and it would bolt up to my 3spd right. and how long would that last considering the 350 would be factory 2brl. __________________ 69 GMC short bed stepside with a wimpy six that can barely pull itself. 99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1

04-11-2003, 08:43 PM	#2
Pumkin Truck Thats just prime! Join Date: Mar 2002 Location: TEXAS Posts: 720	TTT come on guys, help a fellow member out. __________________ 69 GMC short bed stepside with a wimpy six that can barely pull itself. 99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1

04-11-2003, 09:57 PM	#3
lpaine Registered User Join Date: Oct 2002 Location: Parksville, B.C. Canada Posts: 637	Not really sure what you're asking- I think you need to be a little more specific __________________ 1969 G.M.C 3/4 Ton 920 (Canadian Version) 307 3 speed, currently apart 1998 Chevy 1/2 ton ex cab V-6 5 speed 1967 Chevy SWB - project truck; not started just yet

04-11-2003, 09:59 PM	#4
Pumkin Truck Thats just prime! Join Date: Mar 2002 Location: TEXAS Posts: 720	Just a factory rebuild, the motor is from a 72 impala 2brl. just a simple rebuild to get it running, the motor was running smooth when he put it in his truck but it was never started for over 10 years. thnx __________________ 69 GMC short bed stepside with a wimpy six that can barely pull itself. 99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1

04-11-2003, 10:14 PM	#5
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,142	I would expect a long block to be about 8 hundred after adding in accesories. Here is a link to a place that I have used in the past with good results. Last time I had a motor rebuilt here they had it done in a couple of days but you had to pay with green cash. Always be sure that you can identify you parts as they may try to slip in somebodys elses parts. http://www.citymotorsupply.com/ Have fun __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.