What parts need reproduced the most - The 1947 - Present Chevrolet & GMC Truck Message Board Network

croatoan · 11-15-2011, 01:34 PM

Big Block Chevy pass side a/c brackets is on the top of my list

PanelDeland · 11-15-2011, 01:49 PM

Sub,Panel,rear quarters/Blazer tubs.

srvivor71 · 11-15-2011, 01:51 PM

Really good quality steering wheels in all the original colors.

croatoan · 11-15-2011, 01:53 PM

the wheels you get from LMC are not up to par?

vectorit · 11-15-2011, 02:03 PM

A correct version of the OEM Rockwell T-221 shifter boot.
Aqua green '68 arm rests.
Aqua green correct OEM "Custom" seat covers for the Suburban bench seats.
Suburban OEM style headliner boards, and plastic retainer strips.
67/68 OEM correct side trim clips

Obviously the demand for my wish list items are low, so the chance of my wish list getting repro'd is really low.

hgs_notes · 11-15-2011, 02:06 PM

Blazer windshield frame inner panel. Manual throttle cables.

72freak · 11-15-2011, 02:09 PM

Cabs???

68gmsee · 11-15-2011, 02:15 PM

I'd like to see the top and bottom of the tailgates reproduced instead of having to replace the whole tailgate. Maybe the complete cab top in one piece and made to fit exactly. Lots of trucks rusted out on top of the windshield area.

Rochlow · 11-15-2011, 02:19 PM

Heater delete panels (underhood and dash)

a_barth · 11-15-2011, 03:51 PM

Tow hooks, of course then that detracts from the cool factor.
Posted via Mobile Device

SS Tim · 11-15-2011, 03:55 PM

toolboxes
bucket seats
correct consoles
custom and custom delux seat covers

NAPCO C30 kits

72GMCK-2500 · 11-15-2011, 04:01 PM

1960-63 and 1964-69 GMC V6 hood emblems. Also another thing would be the brake pedal pad that says "Power Brakes", i think they were available on 63-72 trucks.

RAS C-10 · 11-15-2011, 04:39 PM

Complete set of power steering brackets for inline-6 engines with set of pulleys
Toooooo.. many variations out there!

srvivor71 · 11-15-2011, 05:02 PM

Quote:

Originally Posted by croatoan

the wheels you get from LMC are not up to par?

I got my steering wheel from somewhere else and it is a flimsy POS. Doesn't feel like it has a steel core inside. I can't speak for LMC but I've seen alot of negative comments here (and never a positive one) about all the aftermarket ones.

srvivor71 · 11-15-2011, 05:04 PM

Quote:

Originally Posted by a_barth

Tow hooks, of course then that detracts from the cool factor.
Posted via Mobile Device

Dying for original tow hooks (but not bad enough to pay $400)

srvivor71 · 11-15-2011, 05:07 PM

oh - and the NP 205 stickers that go on the visor or glove box door. I really want one of them and can't find them anywhere.

gcburdic · 11-15-2011, 05:52 PM

Now you guys know it's a lot funnier trying to find these rare parts than just flipping open a parts book and ordering!!!

The thrill of the hunt makes it all worth the while!!!

capev86 · 11-15-2011, 06:07 PM

Suburban headliner....exact factory-look reproduction that reuses the factory bows and correct seat upholstery for custom deluxe trucks (SMS carries the cloth by the way). Cheyenne has vastly different scroll work.

gcburdic · 11-15-2011, 06:12 PM

Quote:

Originally Posted by capev86

Suburban headliner....exact factory-look reproduction that reuses the factory bows and correct seat upholstery for custom deluxe trucks (SMS carries the cloth by the way). Cheyenne has vastly different scroll work.

hey capev....do you know if these burb headliners from Classic Industries are any good???...no picture of them, but they do list them....

http://www.classicindustries.com/tru...&p=2&sb=0&r=15

capev86 · 11-15-2011, 06:26 PM

should work, but not an exact reproduction. they use their own support system i think. i inquired awhile back and they sent me some pics but i guess i didn't save the email since i decided to pass. if you just want a headliner go for it, but if you want to reuse your nice chrome bows and have that factory look.....you are @$%& out of luck like me, unless you find good originals that someone is willing to part with!

vectorit · 11-15-2011, 06:40 PM

Quote:

Originally Posted by gcburdic

hey capev....do you know if these burb headliners from Classic Industries are any good???...no picture of them, but they do list them....

http://www.classicindustries.com/tru...&p=2&sb=0&r=15

I actually ordered one of these in tan.
Laid it out on the floor, and right there decided nope..

Still got it, and will never use it.

eightbanger · 11-15-2011, 06:54 PM

Seat belt retractor boots in correct factory colors

sboris · 11-15-2011, 08:07 PM

Quote:

Originally Posted by vectorit

A correct version of the OEM Rockwell T-221 shifter boot.
Aqua green '68 arm rests.
Aqua green correct OEM "Custom" seat covers for the Suburban bench seats.
Suburban OEM style headliner boards, and plastic retainer strips.
67/68 OEM correct side trim clips

Obviously the demand for my wish list items are low, so the chance of my wish list getting repro'd is really low.

I second the Aqua green 68 seat with arm rests. Thats TWO!
Lets start a pettition!!!

Vintage Windmills · 11-15-2011, 08:33 PM

A steering wheel that appears stock but slightly smaller in diameter. Especially for power steering equipped trucks. Also a patch panel for core support under battery or maybe someone already has that covered.

croatoan · 11-15-2011, 08:49 PM

check out this link they do dia. reductions and restorations http://www.qualityrestorations.com/home.html

11-15-2011, 01:34 PM	#1
croatoan Registered User Join Date: Jul 2011 Location: mt. hope ks Posts: 16	What parts need reproduced the most Big Block Chevy pass side a/c brackets is on the top of my list

11-15-2011, 01:49 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: What parts need reproduced the most Sub,Panel,rear quarters/Blazer tubs. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

11-15-2011, 01:51 PM	#3
srvivor71 Registered User Join Date: Sep 2010 Location: Sullivan County, NY Posts: 455	Re: What parts need reproduced the most Really good quality steering wheels in all the original colors.

11-15-2011, 01:53 PM	#4
croatoan Registered User Join Date: Jul 2011 Location: mt. hope ks Posts: 16	Re: What parts need reproduced the most the wheels you get from LMC are not up to par?

11-15-2011, 02:03 PM	#5
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: What parts need reproduced the most A correct version of the OEM Rockwell T-221 shifter boot. Aqua green '68 arm rests. Aqua green correct OEM "Custom" seat covers for the Suburban bench seats. Suburban OEM style headliner boards, and plastic retainer strips. 67/68 OEM correct side trim clips Obviously the demand for my wish list items are low, so the chance of my wish list getting repro'd is really low. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

11-15-2011, 02:06 PM	#6
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: What parts need reproduced the most Blazer windshield frame inner panel. Manual throttle cables. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-15-2011, 02:09 PM	#7
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: What parts need reproduced the most Cabs??? __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

11-15-2011, 02:15 PM	#8
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: What parts need reproduced the most I'd like to see the top and bottom of the tailgates reproduced instead of having to replace the whole tailgate. Maybe the complete cab top in one piece and made to fit exactly. Lots of trucks rusted out on top of the windshield area.

11-15-2011, 02:19 PM	#9
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: What parts need reproduced the most Heater delete panels (underhood and dash)

11-15-2011, 03:51 PM	#10
a_barth Registered User Join Date: Jun 2010 Location: Eustis, FL Posts: 124	Re: What parts need reproduced the most Tow hooks, of course then that detracts from the cool factor. Posted via Mobile Device

11-15-2011, 03:55 PM	#11
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: What parts need reproduced the most toolboxes bucket seats correct consoles custom and custom delux seat covers NAPCO C30 kits __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

11-15-2011, 04:01 PM	#12
72GMCK-2500 Registered User Join Date: Feb 2011 Location: West Chester Pa. Posts: 195	Re: What parts need reproduced the most 1960-63 and 1964-69 GMC V6 hood emblems. Also another thing would be the brake pedal pad that says "Power Brakes", i think they were available on 63-72 trucks. __________________ 1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride) 1965 GMC 1000 305E V6, Powerglide. GONE 1972 GMC K-2500 350, 4 speed, 229,000 miles 1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4. 1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel. RUST NEVER SLEEPS

11-15-2011, 04:39 PM	#13
RAS C-10 Registered User Join Date: Aug 2011 Location: Anderson, SC Posts: 36	Re: What parts need reproduced the most Complete set of power steering brackets for inline-6 engines with set of pulleys Toooooo.. many variations out there! __________________ If you think nobody cares if you're alive, try missing a couple of payments.

11-15-2011, 05:07 PM	#16
srvivor71 Registered User Join Date: Sep 2010 Location: Sullivan County, NY Posts: 455	Re: What parts need reproduced the most oh - and the NP 205 stickers that go on the visor or glove box door. I really want one of them and can't find them anywhere.

11-15-2011, 05:52 PM	#17
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: What parts need reproduced the most Now you guys know it's a lot funnier trying to find these rare parts than just flipping open a parts book and ordering!!! The thrill of the hunt makes it all worth the while!!! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present



Register or Log In To remove these advertisements.

11-15-2011, 06:07 PM	#18
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: What parts need reproduced the most Suburban headliner....exact factory-look reproduction that reuses the factory bows and correct seat upholstery for custom deluxe trucks (SMS carries the cloth by the way). Cheyenne has vastly different scroll work.

11-15-2011, 06:26 PM	#20
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: What parts need reproduced the most should work, but not an exact reproduction. they use their own support system i think. i inquired awhile back and they sent me some pics but i guess i didn't save the email since i decided to pass. if you just want a headliner go for it, but if you want to reuse your nice chrome bows and have that factory look.....you are @$%& out of luck like me, unless you find good originals that someone is willing to part with!

11-15-2011, 06:54 PM	#22
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: What parts need reproduced the most Seat belt retractor boots in correct factory colors __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

11-15-2011, 08:33 PM	#24
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: What parts need reproduced the most A steering wheel that appears stock but slightly smaller in diameter. Especially for power steering equipped trucks. Also a patch panel for core support under battery or maybe someone already has that covered. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-15-2011, 08:49 PM	#25
croatoan Registered User Join Date: Jul 2011 Location: mt. hope ks Posts: 16	Re: What parts need reproduced the most check out this link they do dia. reductions and restorations http://www.qualityrestorations.com/home.html

Register or Log In To remove these advertisements.