gmc 3/4 ton hub caps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

683/4farm · 05-22-2016, 11:59 AM

Recently bought some hub caps off a board member oregon 1967 gmc and i have to start by saying thank you to him,with all the no trust and lying and stealing in this world we were making a deal on these caps and was leary on sending a money order but this man had paid his own money for shipping and shipped these caps before i even had the money order and sent a picture of the shipping info receipt for proof,so those of you with doubt there is still good people out there, thank you again ray, now onto the caps, i have a dana 60 in my truck and the rear hubs are making the caps hit by just a hair from fully seating, had anyone had this issue and what did you use to maybe hit these centers out just enough to clear? Thank you all in advance.

davepl · 05-22-2016, 12:16 PM

No pics? When you buy GMC 3/4 ton hubcaps online there's a tradition you must post photos of them. ;-) Here are mine. NOS 1970.

re1 · 05-23-2016, 12:53 AM

Quote:

Originally Posted by davepl

No pics? When you buy GMC 3/4 ton hubcaps online there's a tradition you must post photos of them. ;-) Here are mine. NOS 1970.

GMC 3/4 ton Hubcaps

http://www.ebay.com/itm/152092244082...%3AMEBIDX%3AIT

**Bob B.** · 05-23-2016, 01:04 AM

Quote:

Originally Posted by re1

GMC 3/4 ton Hubcaps

http://www.ebay.com/itm/152092244082...%3AMEBIDX%3AIT

Those look like '73-'74. Flat center, not painted black. Very nice.

factorystock · 05-30-2016, 12:31 PM

Quote:

Originally Posted by davepl

Here are mine. NOS 1970.

Just curious, were those the chrome over brass construction, chrome over steel or the stainless versions? Apparently GM was experimenting with different materials on these hubcaps in the '72-'73 season. Very difficult to tell from photos. I guess it depends when the NOS parts were manufactured, if NOS box is from '69-'71, good bet it is chrome over brass, during after '72, who knows, could be like a box of chocolate.

davepl · 05-30-2016, 01:49 PM

Quote:

Originally Posted by factorystock

Just curious, were those the chrome over brass construction, chrome over steel or the stainless versions? Apparently GM was experimenting with different materials on these hubcaps in the '72-'73 season. Very difficult to tell from photos. I guess it depends when the NOS parts were manufactured, if NOS box is from '69-'71, good bet it is chrome over brass, during after '72, who knows, could be like a box of chocolate.

I know they're the one-year-only or less version, hard to find. A magnet wouldn't stick to brass, but I'm not sure it'd stick to the stainless either, depending on the alloy. How do I check I wonder?

683/4farm · 05-22-2016, 12:22 PM

Those are the same exact ones just painted

**special-K** · 05-23-2016, 06:19 AM

Let's make sure what truck and caps you have first. You have a
'67 GMC and the caps are the original inner clip type?

683/4farm · 05-23-2016, 07:18 AM

These are the caps i have

**hooverfish** · 05-30-2016, 11:12 AM

Did the two black center caps work on the rear wheels ??

factorystock · 05-30-2016, 12:19 PM

What I see in the photo are 4 GMC 3/4 ton caps, however the white ones are '73-'78 and the silver ones are '69 (but same mold as '70-'72). The popped out center hubcaps used between '69 and '72 are necessary to clear the Dana 60 axle. These will have black paint in the center around GMC letters. The popped in style will not fit '69 thru '72 unless you pop the center out with a rubber mallet of some kind. '73 and later used the popped in style because the taller Dana 60 was dropped in favor of the shorter corporate axle. '73 and newer will not have black paint around the GMC letters. There was a "first design" early '69 3/4 ton hubcap that was not popped out, that was used only on front axles for a short time ( these require a trained eye to spot out from a photo).

683/4farm · 06-01-2016, 01:56 PM

Quote:

Originally Posted by hooverfish

did the two black center caps work on the rear wheels ??

yes the work nice

**special-K** · 05-30-2016, 02:59 PM

I run the innies (73-75) on my '72 GMC with Dana60 just fine. I like them better than the outie black centers

**davischevy** · 05-30-2016, 07:08 PM

special-K, it hurts that you don't like my outie hubcaps.

**special-K** · 05-30-2016, 10:52 PM

Quote:

Originally Posted by davischevy

special-K, it hurts that you don't like my outie hubcaps.

Maybe I should have said "I prefer innies over outies". Does that make you feel any better. We can have different preferences and still be friends, right? I can't hang around with you or be seen in the same place if you wear the exact same clothes as me. I worry about how people see stuff like that

**davischevy** · 05-30-2016, 11:28 PM

You know I was kiddin' K. I don't take things like that seriously.

Stating an opinion about something in general is no big deal.

I just hate it when people start hating on other peoples stuff specifically.

A lot of things are not my cup of tea. But if the owner put his time and money into it, I am happy for him.

Now back to the hubcaps.

**special-K** · 05-31-2016, 06:24 AM

I knew you were kidding. And I agree on let others like what they like. Well except, what the heck were you thinking going with those ugly hubcaps?

!

72kool · 05-31-2016, 09:26 AM

can i just say how much i dislike yall right now?? jk jk

been trying to find a set for my '72 C20 and im either too late on em or they are way to good for my budget.

**davischevy** · 06-02-2016, 10:29 AM

Quote:

Originally Posted by 72kool

can i just say how much i dislike yall right now?? jk jk

been trying to find a set for my '72 C20 and im either too late on em or they are way to good for my budget.

Dislike is something I have come to terms with.

I find it harder and harder to use the terms "'67-'72 Chevy" and "budget" in the same sentence.

**67sss** · 06-02-2016, 12:08 AM

what did 68 3/4t 2wd GMC caps look like? are they the same as 69 and hard to find?

**hooverfish** · 06-02-2016, 08:50 AM

Quote:

Originally Posted by 67sss

what did 68 3/4t 2wd GMC caps look like? are they the same as 69 and hard to find?

Painted ones look like this picture. Some were chrome with black/red trim paint.
All are getting hard to find in decent condition.

**special-K** · 06-03-2016, 07:38 AM

You need to see the back of a 67/68 3/4t-1t cap to tell it from a 1/2t. You need the clip-style wheels to use them.

camaney · 08-13-2016, 06:40 PM

Can those caps clear the center hub on HO52 ? Need those for 72 chevy 3/4 or somenthing that will work

**special-K** · 08-13-2016, 06:53 PM

Quote:

Originally Posted by camaney

Can those caps clear the center hub on HO52 ? Need those for 72 chevy 3/4 or somenthing that will work

Yes. These are the caps that came on 69-72s, if they have black centers and are convex. The 73-75s aren't painted in the center and are concave. I've never had a problem fitting any 69-75 cap on a Dana60, but for some reason some do. Never heard of them not fitting an HO52. The '70 caps are no different than '69, '71, or '72 bright-work caps. The painted ones started with argent in '69, then went white till the end...even 73-75s.

camaney · 08-13-2016, 07:00 PM

Thanks for the quick reply. Will any other type of newer cap can be installed with no trouble? I really want to keep my 16.5 original wheels

05-22-2016, 11:59 AM	#1
683/4farm Registered User Join Date: Apr 2016 Location: Emmett mi Posts: 44	gmc 3/4 ton hub caps Recently bought some hub caps off a board member oregon 1967 gmc and i have to start by saying thank you to him,with all the no trust and lying and stealing in this world we were making a deal on these caps and was leary on sending a money order but this man had paid his own money for shipping and shipped these caps before i even had the money order and sent a picture of the shipping info receipt for proof,so those of you with doubt there is still good people out there, thank you again ray, now onto the caps, i have a dana 60 in my truck and the rear hubs are making the caps hit by just a hair from fully seating, had anyone had this issue and what did you use to maybe hit these centers out just enough to clear? Thank you all in advance.

05-22-2016, 12:16 PM	#2
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: gmc 3/4 ton hub caps No pics? When you buy GMC 3/4 ton hubcaps online there's a tradition you must post photos of them. ;-) Here are mine. NOS 1970. Attached Images __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

05-22-2016, 12:22 PM	#7
683/4farm Registered User Join Date: Apr 2016 Location: Emmett mi Posts: 44	Re: gmc 3/4 ton hub caps Those are the same exact ones just painted

05-23-2016, 06:19 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: gmc 3/4 ton hub caps Let's make sure what truck and caps you have first. You have a '67 GMC and the caps are the original inner clip type? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-23-2016, 07:18 AM	#9
683/4farm Registered User Join Date: Apr 2016 Location: Emmett mi Posts: 44	Re: gmc 3/4 ton hub caps These are the caps i have Attached Images

05-30-2016, 11:12 AM	#10
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,133	Re: gmc 3/4 ton hub caps Did the two black center caps work on the rear wheels ?? __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job"

05-30-2016, 12:19 PM	#11
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,372	Re: gmc 3/4 ton hub caps What I see in the photo are 4 GMC 3/4 ton caps, however the white ones are '73-'78 and the silver ones are '69 (but same mold as '70-'72). The popped out center hubcaps used between '69 and '72 are necessary to clear the Dana 60 axle. These will have black paint in the center around GMC letters. The popped in style will not fit '69 thru '72 unless you pop the center out with a rubber mallet of some kind. '73 and later used the popped in style because the taller Dana 60 was dropped in favor of the shorter corporate axle. '73 and newer will not have black paint around the GMC letters. There was a "first design" early '69 3/4 ton hubcap that was not popped out, that was used only on front axles for a short time ( these require a trained eye to spot out from a photo).

05-30-2016, 02:59 PM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: gmc 3/4 ton hub caps I run the innies (73-75) on my '72 GMC with Dana60 just fine. I like them better than the outie black centers __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-30-2016, 07:08 PM	#14
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,815	Re: gmc 3/4 ton hub caps special-K, it hurts that you don't like my outie hubcaps. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

05-30-2016, 11:28 PM	#16
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,815	Re: gmc 3/4 ton hub caps You know I was kiddin' K. I don't take things like that seriously. Stating an opinion about something in general is no big deal. I just hate it when people start hating on other peoples stuff specifically. A lot of things are not my cup of tea. But if the owner put his time and money into it, I am happy for him. Now back to the hubcaps. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

05-31-2016, 06:24 AM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: gmc 3/4 ton hub caps I knew you were kidding. And I agree on let others like what they like. Well except, what the heck were you thinking going with those ugly hubcaps? ! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-31-2016, 09:26 AM	#18
72kool Registered User Join Date: Dec 2012 Location: kearney nebraska Posts: 613	Re: gmc 3/4 ton hub caps can i just say how much i dislike yall right now?? jk jk been trying to find a set for my '72 C20 and im either too late on em or they are way to good for my budget. __________________ 1972 GMC C20 Custom Camper 350/TH350

06-02-2016, 12:08 AM	#20
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	Re: gmc 3/4 ton hub caps what did 68 3/4t 2wd GMC caps look like? are they the same as 69 and hard to find?

06-03-2016, 07:38 AM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: gmc 3/4 ton hub caps You need to see the back of a 67/68 3/4t-1t cap to tell it from a 1/2t. You need the clip-style wheels to use them. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 08-13-2016 at 06:48 PM.

08-13-2016, 06:40 PM	#23
camaney Registered User Join Date: Feb 2008 Location: sacramento california Posts: 204	Re: gmc 3/4 ton hub caps Can those caps clear the center hub on HO52 ? Need those for 72 chevy 3/4 or somenthing that will work



Register or Log In To remove these advertisements.

08-13-2016, 07:00 PM	#25
camaney Registered User Join Date: Feb 2008 Location: sacramento california Posts: 204	Re: gmc 3/4 ton hub caps Thanks for the quick reply. Will any other type of newer cap can be installed with no trouble? I really want to keep my 16.5 original wheels

Register or Log In To remove these advertisements.