Billit grill hood latch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gashog · 11-16-2002, 08:26 PM

I'm installing a billit grill in my 69 using a 72 shell and latch assembly. Since I can no longer access the latch thru the grill, I was thinking of either welding on an extention or going with some kind of remote. Any idea's?

barn9 · 11-16-2002, 10:38 PM

Try search, this has been covered in the past. I seem to remember that some used a rod that went down to where you reach under the bumper to open the latch, and also some used a remote cable type hood release kit from J.C. Whitney. Keep us posted, I'm thinking of getting one myself.

gashog · 11-17-2002, 04:15 PM

Hey Barn 9 Thanks for the help. I found the post you were talking about, I went with the extention rod, it was easy and seems to work fine.

**BIG ORANGE** · 11-17-2002, 04:25 PM

Glad you found the thread,I had a neat set up on the burb,put a bracket on the bottom of the radiator support and a hime joint in the bottom of the latch with a rod running through the bracket on the support it worked fine.

CustomChevy · 11-17-2002, 06:51 PM

if you are looking for inside hood latch and cable, you can try lokar.

www.lokar.com

good luck!

11-16-2002, 08:26 PM	#1
gashog Active Member Join Date: Oct 2002 Location: Lake co. california Posts: 192	Billit grill hood latch? I'm installing a billit grill in my 69 using a 72 shell and latch assembly. Since I can no longer access the latch thru the grill, I was thinking of either welding on an extention or going with some kind of remote. Any idea's? __________________ 69 Custom/10 454 Turbo 400 and 70 Custom/20 350 Turbo 350, 73 cheyanne C/10 also 69 camaro Z/28 and 85 Iroc Z

11-16-2002, 10:38 PM	#2
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Try search, this has been covered in the past. I seem to remember that some used a rod that went down to where you reach under the bumper to open the latch, and also some used a remote cable type hood release kit from J.C. Whitney. Keep us posted, I'm thinking of getting one myself. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

11-17-2002, 04:15 PM	#3
gashog Active Member Join Date: Oct 2002 Location: Lake co. california Posts: 192	Hey Barn 9 Thanks for the help. I found the post you were talking about, I went with the extention rod, it was easy and seems to work fine. __________________ 69 Custom/10 454 Turbo 400 and 70 Custom/20 350 Turbo 350, 73 cheyanne C/10 also 69 camaro Z/28 and 85 Iroc Z

11-17-2002, 04:25 PM	#4
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	hood latch Glad you found the thread,I had a neat set up on the burb,put a bracket on the bottom of the radiator support and a hime joint in the bottom of the latch with a rod running through the bracket on the support it worked fine. __________________ Things happen for a reason!

11-17-2002, 06:51 PM	#5
CustomChevy Registered User Join Date: Nov 2002 Posts: 462	inside hood latch? if you are looking for inside hood latch and cable, you can try lokar. www.lokar.com good luck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.