Clutch/Flywheel/Bellhousing Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeN** · 07-08-2008, 10:38 AM

Does anyone know if the larger 11" clutch/pressure plate will fit inside the stock bellhousing on a 64-66 C10? I know that you can get a 153 tooth flywheel drilled for both the small 10.4" clutch or the larger 11" clutch, but I want to make sure the larger pressure plate fits inside the bellhousing before purchasing.

I decided to try my 64 C10 for towing my 69 Chevelle on an 18' open trailer, and it worked out quite well, but there was quite a bit of clutch slippage when starting out while facing uphill. I'd like to go to the larger clutch/pressure plate if possible.

07-08-2008, 10:38 AM	#1
MikeN Senior Member Join Date: Oct 2007 Location: Marietta, GA Posts: 782	Clutch/Flywheel/Bellhousing Question Does anyone know if the larger 11" clutch/pressure plate will fit inside the stock bellhousing on a 64-66 C10? I know that you can get a 153 tooth flywheel drilled for both the small 10.4" clutch or the larger 11" clutch, but I want to make sure the larger pressure plate fits inside the bellhousing before purchasing. I decided to try my 64 C10 for towing my 69 Chevelle on an 18' open trailer, and it worked out quite well, but there was quite a bit of clutch slippage when starting out while facing uphill. I'd like to go to the larger clutch/pressure plate if possible.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.