whats the deal with up22.com - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hillbilly Deluxe 65 · 04-01-2008, 06:29 AM

so im really needing a hood and they are the cheapest i have found, but i have heard some other board members complain about them i believe, also if i were to get a full pin on raceweith hood from there whats stopping me from jsut changing my hood spring ad mounting the hood to the old hood hinge and just pinning on the front

thanks LZ

cst70rocket · 04-01-2008, 06:40 AM

At one time,they led the better business bureau with bad reports. I'm not sure how they are now, but they were awful for years. I got a vega hood and had 200 hrs in it to make it presentable!

TimE · 04-01-2008, 06:41 AM

I bought an Unlimited Products hood for a Camaro several years ago and the fit was not very good, to say the least. I guess you get what you pay for.
Whatever brand you go with, the race weight will not have any reinforcement for the hood hinges and, in my opinion, would not work as such. I would suggest dzus fasteners to mount the hood and then paint them body color.

Hillbilly Deluxe 65 · 04-01-2008, 11:05 PM

well i mean this hood is for my daily driver and if she breaks down on me which never has happened but if it does it would take two people to lift a full pin on hood off

nxtruck · 04-02-2008, 08:32 PM

I've been down this road already. I first bought a race-weight liftoff hood from a place called Creative Glass in Tn. It fit ok, but had to make some brackets and use dzus fastners to mount it. It also took 2 people to remove or replace it. I got tired of this very quickly, sold the pin-on hood, and bought a bolt-on from Unlimited Products. It did take some work, but not really that much. Overall, I'm happy with it and it doesn't take 2 people to get underhood access!

Hillbilly Deluxe 65 · 04-02-2008, 10:32 PM

could u send me a link to the place u bought it

nxtruck · 04-04-2008, 11:22 PM

Quote:

Originally Posted by Hillbilly Deluxe 65

could u send me a link to the place u bought it

From what I understand, Creative Glass is out of business. Unlimited Products is where my bolt-on hood came from ( up22.com ).

68c10owner · 04-05-2008, 05:55 AM

i knew a guy who bought a cowl hood from them for his 85 burb. Fit ok but they did`nt finishe the cowl part very well. One side of the raised cowl was curved and the other side was cut flat. I would`nt buy from them. Try US Body source.

whitewallslick · 04-07-2008, 08:47 PM

I bought some chevelle bumpers from unlimited products some time ago. I was not impressed with the fit, or quality.

I have bought parts from US Body Source and their stuff has always been very nice quality and they will work with you on the weight of the parts depending on your needs (street, race, street race).

04-01-2008, 06:29 AM	#1
Hillbilly Deluxe 65 Wheelin' and Dealin' Join Date: Nov 2007 Location: poquoson va Posts: 320	whats the deal with up22.com so im really needing a hood and they are the cheapest i have found, but i have heard some other board members complain about them i believe, also if i were to get a full pin on raceweith hood from there whats stopping me from jsut changing my hood spring ad mounting the hood to the old hood hinge and just pinning on the front thanks LZ __________________ 1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65 my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700

04-01-2008, 06:40 AM	#2
cst70rocket Registered User Join Date: Sep 2005 Location: San Angelo or Eufaula Posts: 301	Re: whats the deal with up22.com At one time,they led the better business bureau with bad reports. I'm not sure how they are now, but they were awful for years. I got a vega hood and had 200 hrs in it to make it presentable!

04-01-2008, 06:41 AM	#3
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: whats the deal with up22.com I bought an Unlimited Products hood for a Camaro several years ago and the fit was not very good, to say the least. I guess you get what you pay for. Whatever brand you go with, the race weight will not have any reinforcement for the hood hinges and, in my opinion, would not work as such. I would suggest dzus fasteners to mount the hood and then paint them body color.

04-01-2008, 11:05 PM	#4
Hillbilly Deluxe 65 Wheelin' and Dealin' Join Date: Nov 2007 Location: poquoson va Posts: 320	Re: whats the deal with up22.com well i mean this hood is for my daily driver and if she breaks down on me which never has happened but if it does it would take two people to lift a full pin on hood off __________________ 1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65 my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700

04-02-2008, 08:32 PM	#5
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: whats the deal with up22.com I've been down this road already. I first bought a race-weight liftoff hood from a place called Creative Glass in Tn. It fit ok, but had to make some brackets and use dzus fastners to mount it. It also took 2 people to remove or replace it. I got tired of this very quickly, sold the pin-on hood, and bought a bolt-on from Unlimited Products. It did take some work, but not really that much. Overall, I'm happy with it and it doesn't take 2 people to get underhood access!

04-02-2008, 10:32 PM	#6
Hillbilly Deluxe 65 Wheelin' and Dealin' Join Date: Nov 2007 Location: poquoson va Posts: 320	Re: whats the deal with up22.com could u send me a link to the place u bought it __________________ 1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65 my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700

04-05-2008, 05:55 AM	#8
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,006	Re: whats the deal with up22.com i knew a guy who bought a cowl hood from them for his 85 burb. Fit ok but they did`nt finishe the cowl part very well. One side of the raised cowl was curved and the other side was cut flat. I would`nt buy from them. Try US Body source. __________________ Anthony

04-07-2008, 08:47 PM	#9
whitewallslick Registered User Join Date: Mar 2008 Location: Dayton, Ohio Posts: 19	Re: whats the deal with up22.com I bought some chevelle bumpers from unlimited products some time ago. I was not impressed with the fit, or quality. I have bought parts from US Body Source and their stuff has always been very nice quality and they will work with you on the weight of the parts depending on your needs (street, race, street race).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.