Good Price For.... a Dana 60 Front Diff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CowboyProtectionUnit · 08-04-2011, 09:08 AM

I Found this ad On Craigs List:

http://omaha.craigslist.org/pts/2486650133.html

what do ya think... OR What IS a Good Price For a Dana 60 Front Differential

Chris Guthro · 08-04-2011, 09:43 AM

Yea that seems to be a fair pricee, id knock him down to 350 cash tho

CowboyProtectionUnit · 08-04-2011, 09:50 AM

thats what I was thinking....

CowboyProtectionUnit · 08-04-2011, 09:53 AM

If that One Is Gone... What is the Going Price Of a Dana 60... I'm Still hoping to Find a Donor Truck but....... I may buy one and hold on to it just incase... if the Price Be right, that is

dropd80s · 08-04-2011, 09:59 AM

It's missing lockouts and looks like the yoke too. Might price these items first. I would look at the axle thoroughly also if you're not planning to rebuild it. A complete rebuild cost about $1200 in parts alone for the last one I did, not including the lockouts and yoke. That could blow your budget quick if you're planning on a couple dollars on a set of lockouts and throw it under your dually.

CowboyProtectionUnit · 08-04-2011, 10:07 AM

I was Planning On Swapping things out with Detroit Locker Interals... I'm Just kinda shopping around here... I'd prefer to find a 1ton 4x4 donor truck

ghettoluxury · 08-04-2011, 07:47 PM

the cheapest lockouts for a Dana 60 are $200 and they are Superwinch

cheepin · 08-04-2011, 09:30 PM

That's cheap for a 60 around here.Even though it's a dually.They go for $600 up here.And singles ar even more!

madcow75 · 08-04-2011, 10:22 PM

That real cheap if it were around here I would have boughten it by now. A cheap Dana 60 around here is $800 upward to $2000 depending on the condition and whats in it. If it is still available and if I were you I would be purchasing it tommorrow.

Mr. 250r · 08-04-2011, 11:25 PM

Around here they go for 1000+ which i find is way too much for an axle i got mine for 850 with the 14b ff g80 rear end as well everything complete and working

67_SS396 · 08-04-2011, 11:45 PM

That's stupid cheap for around here.
Posted via Mobile Device

CowboyProtectionUnit · 08-05-2011, 02:58 AM

See thats Where I'm Confused.... I don't really think I need a Different Rear end... He Says is the Front Diff off a dually.... what would it matter if it was off a dually or single if its the front end.... I may if I win some Cash on sunday Call'm up and offer like $200 to start with and Go from there.... Gonna Run with "hey I gotta Add all them parts you've pulled from it

ghettoluxury · 08-05-2011, 09:27 AM

The hubs and rotors are different for a dually on the front axle. The mounting surface is 5 inches further out than a single wheel

madcow75 · 08-05-2011, 09:52 AM

Wow if you were to offer him $200 that's a slap in the face. $400 is a steal. He is giving it away. The truck you are purchasing is a 2wd 1ton or 4wd1ton.. I thought it was a 2wd but I could be wrong. Are you doing a conversion to 4wd, that is if it is 2wd.
It is easy to make that dually axle to a single wheel front axle, just get single wheel hubs.

CowboyProtectionUnit · 08-05-2011, 01:31 PM

My Trucks a 2wd...... $200 is a Starting Point....The Truck I'm Getting is a 2wd and yeah i'm Converting it to a 4wd ( hence the want for a donor truck spring, I'ma need spring hangers Hangers and such )....... The Dana ADD says its From a dually... what does that matter?? I'm keeping it a dually...

Dunenutt · 08-05-2011, 01:39 PM

If you are keeping it a dually, it's perfect!

Around here if I offered $200 for that, all I would hear is a dial tone.

CowboyProtectionUnit · 08-05-2011, 03:18 PM

Bought It for $350

madcow75 · 08-05-2011, 03:48 PM

Good score you stole it!!!!!!!!!!!!!!!!! Give it to me. I paid $850 for the same axle.

CowboyProtectionUnit · 08-05-2011, 04:36 PM

AND Scored arrangements on a 12valve cummins with bellhousing for 2k 180,000 on the motor, an possibly a bed...... Yeah buddy
Posted via Mobile Device

CowboyProtectionUnit · 08-05-2011, 06:40 PM

ANNNNNNNNNNNN it Broke my Finger....... LOL

**Dieselwrencher** · 08-05-2011, 06:47 PM

It was all good until you broke your finger!

You stole that D60. Good thing you didn't wait because I was going to call on it if you hadn't purchased it when I got to the end of this thead.

CowboyProtectionUnit · 08-05-2011, 06:53 PM

LOL Guys a Scrapper an seller... an he's gotta ton of differentials front and back not sure what he's got.... you could call'm an tell'm Eric Told ya about his stuff...

**Dieselwrencher** · 08-05-2011, 07:46 PM

Does he have any D80's by chance? His name isn't Mark is it?

CowboyProtectionUnit · 08-05-2011, 07:58 PM

not sure on the 80's but nope his names Scott.....

67_SS396 · 08-06-2011, 02:57 AM

Sounds like he made up for selling the 60 cheap for possibly selling the 12 valve that high. Any idea what year 12 valve?
Posted via Mobile Device

08-04-2011, 09:08 AM	#1
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Good Price For.... a Dana 60 Front Diff I Found this ad On Craigs List: http://omaha.craigslist.org/pts/2486650133.html what do ya think... OR What IS a Good Price For a Dana 60 Front Differential __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-04-2011, 09:43 AM	#2
Chris Guthro Registered User Join Date: Nov 2009 Location: Antigonish Nova Scotia Posts: 213	Re: Good Price For.... a Dana 60 Front Diff Yea that seems to be a fair pricee, id knock him down to 350 cash tho

08-04-2011, 09:50 AM	#3
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff thats what I was thinking.... __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-04-2011, 09:53 AM	#4
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff If that One Is Gone... What is the Going Price Of a Dana 60... I'm Still hoping to Find a Donor Truck but....... I may buy one and hold on to it just incase... if the Price Be right, that is __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-04-2011, 09:59 AM	#5
dropd80s Registered User Join Date: Mar 2003 Location: wichita falls tx Posts: 429	Re: Good Price For.... a Dana 60 Front Diff It's missing lockouts and looks like the yoke too. Might price these items first. I would look at the axle thoroughly also if you're *not* planning to rebuild it. A complete rebuild cost about $1200 in parts alone for the last one I did, not including the lockouts and yoke. That could blow your budget quick if you're planning on a couple dollars on a set of lockouts and throw it under your dually. __________________ "I'm Dirk Diggler enough to own and operate a vehicle of this caliber" -veinbar Dropped and LS Swapped SWB 87 Build Thread

08-04-2011, 10:07 AM	#6
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff I was Planning On Swapping things out with Detroit Locker Interals... I'm Just kinda shopping around here... I'd prefer to find a 1ton 4x4 donor truck __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-04-2011, 07:47 PM	#7
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: Good Price For.... a Dana 60 Front Diff the cheapest lockouts for a Dana 60 are $200 and they are Superwinch __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

08-04-2011, 09:30 PM	#8
cheepin Registered User Join Date: Nov 2009 Location: Parachute, CO Posts: 183	Re: Good Price For.... a Dana 60 Front Diff That's cheap for a 60 around here.Even though it's a dually.They go for $600 up here.And singles ar even more! __________________ 1984 1ton 4x4 crew cab dually 6.2 diesel,465,205,D60,D70,1987 3/4ton 4x4 suburban 5.7 FI350,TH400,208,1985 CJ-7 FI406,465,205,D60,FF14, 1970 Jeepster 350,465,205,D44,FF14,

08-04-2011, 10:22 PM	#9
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Good Price For.... a Dana 60 Front Diff That real cheap if it were around here I would have boughten it by now. A cheap Dana 60 around here is $800 upward to $2000 depending on the condition and whats in it. If it is still available and if I were you I would be purchasing it tommorrow.

08-04-2011, 11:25 PM	#10
Mr. 250r Registered User Join Date: Dec 2010 Location: freeburg, illinois Posts: 885	Re: Good Price For.... a Dana 60 Front Diff Around here they go for 1000+ which i find is way too much for an axle i got mine for 850 with the 14b ff g80 rear end as well everything complete and working __________________ 1987 Chevy V30 - http://67-72chevytrucks.com/vboard/s...d.php?t=573854 1988 IROC-Z Camaro - 305/T5 T-Top 1989 GMC V35 - Marbolo Express http://67-72chevytrucks.com/vboard/s...d.php?t=596850 1991 V2500 Suburban Silverado - Sold 1991 V2500 Suburban Scottsdale - Big Nasty http://67-72chevytrucks.com/vboard/s...d.php?t=497423 2001 Ram 3500 5.9 H.O NV56 EC DRW - Sold 2003 1500 Silverado 2004 Ram 3500 5.9 H.O NV56 CC DRW - Sold 2005 Silverado 2500HD 6.6/ZF6 CC LWB

08-04-2011, 11:45 PM	#11
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Re: Good Price For.... a Dana 60 Front Diff That's stupid cheap for around here. Posted via Mobile Device __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

08-05-2011, 02:58 AM	#12
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff See thats Where I'm Confused.... I don't really think I need a Different Rear end... He Says is the Front Diff off a dually.... what would it matter if it was off a dually or single if its the front end.... I may if I win some Cash on sunday Call'm up and offer like $200 to start with and Go from there.... Gonna Run with "hey I gotta Add all them parts you've pulled from it __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-05-2011, 09:27 AM	#13
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: Good Price For.... a Dana 60 Front Diff The hubs and rotors are different for a dually on the front axle. The mounting surface is 5 inches further out than a single wheel __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

08-05-2011, 09:52 AM	#14
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Good Price For.... a Dana 60 Front Diff Wow if you were to offer him $200 that's a slap in the face. $400 is a steal. He is giving it away. The truck you are purchasing is a 2wd 1ton or 4wd1ton.. I thought it was a 2wd but I could be wrong. Are you doing a conversion to 4wd, that is if it is 2wd. It is easy to make that dually axle to a single wheel front axle, just get single wheel hubs.

08-05-2011, 01:31 PM	#15
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff My Trucks a 2wd...... $200 is a Starting Point....The Truck I'm Getting is a 2wd and yeah i'm Converting it to a 4wd ( hence the want for a donor truck spring, I'ma need spring hangers Hangers and such )....... The Dana ADD says its From a dually... what does that matter?? I'm keeping it a dually... __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241



Register or Log In To remove these advertisements.

08-05-2011, 01:39 PM	#16
Dunenutt Newbee Join Date: Jan 2010 Location: Phoenix, Arizona Posts: 1,406	Re: Good Price For.... a Dana 60 Front Diff If you are keeping it a dually, it's perfect! Around here if I offered $200 for that, all I would hear is a dial tone.

08-05-2011, 03:18 PM	#17
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff Bought It for $350 __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-05-2011, 03:48 PM	#18
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Good Price For.... a Dana 60 Front Diff Good score you stole it!!!!!!!!!!!!!!!!! Give it to me. I paid $850 for the same axle.

08-05-2011, 04:36 PM	#19
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff AND Scored arrangements on a 12valve cummins with bellhousing for 2k 180,000 on the motor, an possibly a bed...... Yeah buddy Posted via Mobile Device __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-05-2011, 06:40 PM	#20
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff ANNNNNNNNNNNN it Broke my Finger....... LOL __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-05-2011, 06:47 PM	#21
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Good Price For.... a Dana 60 Front Diff It was all good until you broke your finger! You stole that D60. Good thing you didn't wait because I was going to call on it if you hadn't purchased it when I got to the end of this thead. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-05-2011, 06:53 PM	#22
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff LOL Guys a Scrapper an seller... an he's gotta ton of differentials front and back not sure what he's got.... you could call'm an tell'm Eric Told ya about his stuff... __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-05-2011, 07:46 PM	#23
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Good Price For.... a Dana 60 Front Diff Does he have any D80's by chance? His name isn't Mark is it? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-05-2011, 07:58 PM	#24
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Good Price For.... a Dana 60 Front Diff not sure on the 80's but nope his names Scott..... __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

08-06-2011, 02:57 AM	#25
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Re: Good Price For.... a Dana 60 Front Diff Sounds like he made up for selling the 60 cheap for possibly selling the 12 valve that high. Any idea what year 12 valve? Posted via Mobile Device __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

Register or Log In To remove these advertisements.