![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
![]()
Im going to start the build thread on my 1986 k20 chevy. This truck was sitting for 8 years in my driveway just rotting away and my dad gave it to me. The person i work for gave me a six inch lift kit for free and i decided to start building fixing and building this truck to get it back to life. I then purchased 3 inch blocks to raise it even more!
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
This is the hole in the floor of my cab!
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
Here are just a few shots of the truck after the liftkit.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
and again.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
Here is when i took the bed off because it is completely junk!
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
Here are some pics of when i welded in the new cab floor.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2007
Location: Callander Ont.
Posts: 387
|
Re: 1986 k20 Build Thread
Awesome build thread... It's not a build thread unless you have lots of pictures. You win the prize for most pics
![]() Awesome work Brad. Your floor looks like my 87 cab floor. I'm still searching for that sweet like what you found on Craigs. Damn. Man You got lucky there. You could even recoop some funds by selling your repaired cab ![]()
__________________
--Glenn-- http://67-72chevytrucks.com/vboard/s...d.php?t=345975 http://67-72chevytrucks.com/vboard/s...d.php?t=564403 |
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
So this is all i have for now and i can only work on weekends because im only 16 and i have school during the week. i also work at a collision and body shop that my neighbors own so i work everyday after school. working at a body shop is teaching me how to paint, weld, do body work, and that's basically all i need to make a sweet truck. i plan on making this truck a show truck. i originally planned on a woods beater until i scored that cab and bed on craigslist.
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Dec 2012
Location: Preble county ohio
Posts: 1,914
|
Re: 1986 k20 Build Thread
man that 4wd is packing some serious spring packs!
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jul 2011
Location: back 40, bc
Posts: 3,819
|
Re: 1986 k20 Build Thread
nice work on some major rust repair. one question, post #8 last pic, are those blocks under your front springs? this is a major no-no,get a taller pack or re-arch your springs.
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
I got my speaker grilles in today for the dashboard repair i will do when i am closer to starting the interior which wont be for a while. if you go look at post # 268, and 290 in the crusader build thread you can see what i want to do with the dash board http://67-72chevytrucks.com/vboard/s...d.php?t=493324
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
Yes it is a block its a 6 inch lift spring set and 3 inch block. Please inform me on how this will be a future problem?
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jul 2011
Location: back 40, bc
Posts: 3,819
|
Re: 1986 k20 Build Thread
they WILL get spit out leaving you in a world of hurt. blocks are fine on the rear, not on a steering front axle. google front axle lift blocks. for your safety & everyone around you-ditch the front blocks, just hate to see you wreck all that fine work
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
i just looked up the pa laws and they are illegal anyways on the front so i will probably just buy new leafs or add some leafs. thankyou for informing me about this.
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Feb 2011
Location: Cold Canada
Posts: 310
|
Re: 1986 k20 Build Thread
was that a square wrecker
![]() ![]() |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
haha it actually was my dads daily driver and then the floors wouldnt pass inspection so it sat since like 06.
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jan 2013
Location: Pittsburgh pennsylvania
Posts: 56
|
Re: 1986 k20 Build Thread
Got all of the seam sealer out of the jams.
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
1973-1987 truck, k20, lift kit, long bed, restoration |
|
|