weekend sale-aluminum SBC heads $299.99 each - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mbgmike · 08-25-2010, 07:58 PM

The lowest price we will ever sell these for

straight plugs $299.00 each
angled plugs $310.00

http://www.mcssl.com/store/mikesbump...mance/floo-tek

Small Block Chevy (non LS) performance aluminum cylinder heads. Angle Plug.

Features: - 2.02" intake, 1.60" exhaust stainless swirl polished valves.
- 180cc intake runners
- 62cc exhaust runners
- 64cc combustion chambers
- Hi Performance Springs (.550 lift hydraulic flat tappet)
- PC Seals
- Hardened Locks and Retainers
- 3/8" Screw in Studs, and Guide plates included
- High Temp exhaust seats
- Maganese Bronze Intake Guides Phosphor Bronze Exhaust Guides.
- 5 Angle Valve Job

Intake Test @28" of Water
.100 .200 .300 .400 .500 .600
73.6 123 165 206 237 244 (CFM)

Other: Recommended Head Gaskets: Fel Pro 1003, 1014, 1034, or 1043
Recommended Intake Gaskets: Fel Pro 1206, Mr. Gasket 106

Recommended Spark Plug: Champion C57CX, NGK R5671A-10, or equivalent.

all in stock and ships same day if ordered before 3:00 pm

ends this sunday 5

opm august 29'th

**Dieselwrencher** · 08-25-2010, 08:45 PM

Dang, bump for a sweet deal!

72freak · 08-26-2010, 07:26 AM

Where are these heads made?

mbgmike · 08-26-2010, 04:45 PM

Quote:

Originally Posted by 72freak

Where are these heads made?

Indiana

FL71C10 · 09-03-2010, 12:36 AM

These still available at this price? How much is shiopping to 32803?

All they need is rockers and gaskets?

Twisted78SS · 09-03-2010, 12:39 AM

Still have any? shipped to 98629 if they are..

mbgmike · 09-03-2010, 10:53 AM

Quote:

Originally Posted by FL71C10

These still available at this price? How much is shiopping to 32803?

All they need is rockers and gaskets?

No they are back to regular price. We are out of stock on the straight plug heads but their are 11 angled plugs. Yes all they need are rockers and the gaskets and of course the bolts. They are made by one of the largest head rebuilders in the country. these are new not rebuilt. shipping runs around $30.00 a pair

mbgmike · 09-03-2010, 10:55 AM

Quote:

Originally Posted by Twisted78SS

Still have any? shipped to 98629 if they are..

see prior post. they are back to regular price which is still a good deal. They are one of the best buys in the country as far as heads go.

08-25-2010, 07:58 PM	#1
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	weekend sale-aluminum SBC heads $299.99 each The lowest price we will ever sell these for straight plugs $299.00 each angled plugs $310.00 http://www.mcssl.com/store/mikesbump...mance/floo-tek Small Block Chevy (non LS) performance aluminum cylinder heads. Angle Plug. Features: - 2.02" intake, 1.60" exhaust stainless swirl polished valves. - 180cc intake runners - 62cc exhaust runners - 64cc combustion chambers - Hi Performance Springs (.550 lift hydraulic flat tappet) - PC Seals - Hardened Locks and Retainers - 3/8" Screw in Studs, and Guide plates included - High Temp exhaust seats - Maganese Bronze Intake Guides Phosphor Bronze Exhaust Guides. - 5 Angle Valve Job Intake Test @28" of Water .100 .200 .300 .400 .500 .600 73.6 123 165 206 237 244 (CFM) Other: Recommended Head Gaskets: Fel Pro 1003, 1014, 1034, or 1043 Recommended Intake Gaskets: Fel Pro 1206, Mr. Gasket 106 Recommended Spark Plug: Champion C57CX, NGK R5671A-10, or equivalent. all in stock and ships same day if ordered before 3:00 pm ends this sunday 5opm august 29'th Attached Images Last edited by mbgmike; 08-25-2010 at 08:05 PM.

08-25-2010, 08:45 PM	#2
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: weekend sale-aluminum SBC heads $299.99 each Dang, bump for a sweet deal! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-26-2010, 07:26 AM	#3
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: weekend sale-aluminum SBC heads $299.99 each Where are these heads made? __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

09-03-2010, 12:36 AM	#5
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: weekend sale-aluminum SBC heads $299.99 each These still available at this price? How much is shiopping to 32803? All they need is rockers and gaskets? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

09-03-2010, 12:39 AM	#6
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: weekend sale-aluminum SBC heads $299.99 each Still have any? shipped to 98629 if they are.. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.