Check out my new toy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Richard H. · 03-04-2007, 09:59 AM

Couldn't have been done without all the help and links from here! Thanks
Open the short video link listed and turn down your speakers

http://s18.photobucket.com/albums/b1...t=P3010136.flv

killer71 · 03-04-2007, 10:02 AM

i couldnt get the video link to work??????

Biff · 03-04-2007, 10:06 AM

me either.

looks sharp from this pic though!

Richard H. · 03-04-2007, 10:22 AM

Sorry bout that try now, i changed it?

Farmtruck71 · 03-04-2007, 10:26 AM

sounds good

cdowns · 03-04-2007, 10:48 AM

about one of the most dangerous foolish things i've seen in quite awhile

Rokcrln · 03-04-2007, 10:54 AM

Quote:

Originally Posted by cdowns

about one of the most dangerous foolish things i've seen in quite awhile

Why is that he has both ends of the 2x4 clamped off to somthing and his radiator stool is made for a 150-200lbs load

Richard H. · 03-04-2007, 11:43 AM

Quote:

Originally Posted by Rokcrln

Why is that he has both ends of the 2x4 clamped off to somthing and his radiator stool is made for a 150-200lbs load

The stool is just sitting there I used it to set the radiator on while was putting it on the fan stand and the 2x4 is there for safety as in " Why not" don't know if I need it or not, I did notice though the store bought test stands didn't come with a 500lb bench to tie off to or the clamps. Sorry it does not please you but I don't have a high dollar fab shop such as you. I also don't have the nads to cut someone down without being there.

kelsfine69 · 03-04-2007, 12:35 PM

Quote:

Originally Posted by Rokcrln

Why is that he has both ends of the 2x4 clamped off to somthing and his radiator stool is made for a 150-200lbs load

^^^

Looks Killer...and nothing like the sound of open headers

Sometimes you have to make due with what you got, and if its safe why not.

Kurt L · 03-04-2007, 12:49 PM

sounded real good.cool vid

wnc mountain · 03-04-2007, 01:05 PM

I like! I like! Sounds good! Looks safer than some of the heaps driving down the road around here.

CrashEd · 03-04-2007, 01:44 PM

I pinking it’s nice to see some can afford a professional test stand.

Cool video sounds good. Probably better bracing than i would of done.

**special-K** · 03-04-2007, 02:34 PM

I agree with CDowns.It`s not the 2Xs that I`m worried about.It`s the static engine stand with long bolts through adjustable/moveable mounts that bothers me.I`d never do it.What`s the point?Don`t you have a truck to put it in?

Richard H. · 03-04-2007, 04:04 PM

Quote:

Originally Posted by special-K

I agree with CDowns.It`s not the 2Xs that I`m worried about.It`s the static engine stand with long bolts through adjustable/moveable mounts that bothers me.I`d never do it.What`s the point?Don`t you have a truck to put it in?

16273 post to date between you and cdowns, Seems like those who talk the most usually know the least. Seems like with this you live at a key board, so how about looking shear and pull weight on a 3/8s bolt. The engine has 430 lbs of torque available but if you notice there is nothing tied to it so it is not a factor. Please show me yours or is it a computer simulation.

**Palf70Step** · 03-04-2007, 04:22 PM

Richard H.

Engine looks and sounds good.

Rest....I agree with those that don't think it was the safest setup to run an engine. Those engine stands was not designed to have a running engine on it, regardless of the rating of the bolts. However, lets us keep civil tongues with so the thread is not closed. Just because people have a low or high count does not make then more or less knowledgeable.

Richard H. · 03-04-2007, 04:45 PM

Quote:

Originally Posted by Palf70Step

Richard H.

Engine looks and sounds good.

Rest....I agree with those that don't think it was the safest setup to run an engine. Those engine stands was not designed to have a running engine on it, regardless of the rating of the bolts. However, lets us keep civil tongues with so the thread is not closed. Just because people have a low or high count does not make then more or less knowledgeable.

Close the thread, If you look or read what i posted on the engine board on how to make one structurally safe. Notice I did not post it is a 430 hp turn key ? That's because a 71 C 10 isn't designed for it. Any thing you pull out of a box that says made in China needs to be re-designed , you have to replace all the corners they cut.

**special-K** · 03-04-2007, 04:47 PM

Experience with these particular truck....since`73.What would you like to know?
Experience with computers....about 3 years.Don`t ask.I was hoping you knew.

corn · 03-04-2007, 04:53 PM

Gaff it off. You will notice that you will get guff on a lot of things here, just like anywhere. Like most things on the net, look or dont look. *I get told that Im wrong almost every other post by the same two guys.* Its all good, just keep posting, I need stuff to look at. Motor sounds sweet...

*I didnt mean the guys above & it doesnt really matter who it is.*

bowtiehotrodder · 03-04-2007, 05:54 PM

sounded real good.cool motor. you are brave it does looks a little risky but i glad every thing worked go geter done

*rage'nrat638* · 03-04-2007, 07:31 PM

i think anybody that can build a engine to the caliber of that one. and can test run it on top of that is very ingenious.
i personally want to thank richard for sharing his accomplishments with us here on the board.
looks and sounds great

*67/72junkie* · 03-04-2007, 09:00 PM

I guess some of us are a little foolish.I had a complete motor for sale with with headers .I set it on the shop floor ,run a rubber hose from the fuel pump to a gas can,water hose in thermo housing .hot wire to electronic distributor from battery on the floor and turned starter over with jumper cables to same battery.Buyer had $1000 cash and wanted to here it run.It may have been foolish but it only took a few minutes and I had $1000.

jhow66 · 03-04-2007, 09:15 PM

Sounds mean. As to safety those same 3/8 bolts holds it when it is a car so where is that unsafe. The front is carrying it's own weight on the 2 by. If you think that is unsafe why would you think it is safe when it is hanging free with just those 4 bolts. Looks safe to me. Crank er off!!!!

Richard H. · 03-04-2007, 09:53 PM

Quote:

Originally Posted by GMC Junkie

I guess some of us are a little foolish.I had a complete motor for sale with with headers .I set it on the shop floor ,run a rubber hose from the fuel pump to a gas can,water hose in thermo housing .hot wire to electronic distributor from battery on the floor and turned starter over with jumper cables to same battery.Buyer had $1000 cash and wanted to here it run.It may have been foolish but it only took a few minutes and I had $1000.

The 1000 dollars was easy , The look on the buyers face when you started it....
Priceless

CrashEd · 03-04-2007, 10:08 PM

Heck if it wasnt for dangerous foolish things id never have any fun. And i got a boy that makes the things i do look safe.

*rage'nrat638* · 03-04-2007, 10:38 PM

GO TEAM...GO TEAM

03-04-2007, 09:59 AM	#1
Richard H. Spanked once Join Date: Oct 2006 Location: Intheshop, Indiana Posts: 969	Check out my new toy Couldn't have been done without all the help and links from here! Thanks Open the short video link listed and turn down your speakers http://s18.photobucket.com/albums/b1...t=P3010136.flv Attached Images Last edited by Richard H.; 03-04-2007 at 10:21 AM. Reason: Would not work clip

03-04-2007, 10:02 AM	#2
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Check out my new toy i couldnt get the video link to work?????? __________________ R.I.P. Killer 71 10/26/07

03-04-2007, 10:06 AM	#3
Biff GM Gypsy Join Date: Jan 2007 Location: Flint, Michigan Posts: 127	Re: Check out my new toy me either. looks sharp from this pic though! __________________ 1972 Custom 10 Deluxe LWB 4x4 2003 Power Wheels Barbie Jeep (2 daughters ya know) 2004 Silverado Crew Cab Z71- Sold Here's to your coffin... May it be built of 100 year old oaks which I will plant tomorrow...

03-04-2007, 10:22 AM	#4
Richard H. Spanked once Join Date: Oct 2006 Location: Intheshop, Indiana Posts: 969	Re: Check out my new toy Sorry bout that try now, i changed it?

03-04-2007, 10:26 AM	#5
Farmtruck71 Registered User Join Date: Feb 2007 Location: T-TOWN Posts: 26	Re: Check out my new toy sounds good

03-04-2007, 10:48 AM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Check out my new toy about one of the most dangerous foolish things i've seen in quite awhile __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-04-2007, 12:49 PM	#10
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: Check out my new toy sounded real good.cool vid

03-04-2007, 01:05 PM	#11
wnc mountain More hobbies than money! Join Date: Jan 2002 Location: Raleigh, nc, usa Posts: 655	Re: Check out my new toy I like! I like! Sounds good! Looks safer than some of the heaps driving down the road around here. __________________ '70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project

03-04-2007, 01:44 PM	#12
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: Check out my new toy I pinking it’s nice to see some can afford a professional test stand. Cool video sounds good. Probably better bracing than i would of done.

03-04-2007, 02:34 PM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: Check out my new toy I agree with CDowns.It`s not the 2Xs that I`m worried about.It`s the static engine stand with long bolts through adjustable/moveable mounts that bothers me.I`d never do it.What`s the point?Don`t you have a truck to put it in? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-04-2007, 04:22 PM	#15
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,997	Re: Check out my new toy Richard H. Engine looks and sounds good. Rest....I agree with those that don't think it was the safest setup to run an engine. Those engine stands was not designed to have a running engine on it, regardless of the rating of the bolts. However, lets us keep civil tongues with so the thread is not closed. Just because people have a low or high count does not make then more or less knowledgeable. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-04-2007, 04:47 PM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: Check out my new toy Experience with these particular truck....since`73.What would you like to know? Experience with computers....about 3 years.Don`t ask.I was hoping you knew. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-04-2007, 04:53 PM	#18
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Check out my new toy Gaff it off. You will notice that you will get guff on a lot of things here, just like anywhere. Like most things on the net, look or dont look. I get told that Im wrong almost every other post by the same two guys. Its all good, just keep posting, I need stuff to look at. Motor sounds sweet... I didnt mean the guys above & it doesnt really matter who it is. Last edited by corn; 03-04-2007 at 05:15 PM. Reason: Better?

03-04-2007, 05:54 PM	#19
bowtiehotrodder SIX BANGER Join Date: Sep 2005 Location: NC Posts: 169	Re: Check out my new toy sounded real good.cool motor. you are brave it does looks a little risky but i glad every thing worked go geter done __________________ http://www.cardomain.com/ride/2597018(NN) 1979 chevy truck swb 454 w turbo400 with buckets 1977 chevy truck swb soon to be 454 1976 chevy dually 454 1969 chevy truck six shooter

03-04-2007, 07:31 PM	#20
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: Check out my new toy i think anybody that can build a engine to the caliber of that one. and can test run it on top of that is very ingenious. i personally want to thank richard for sharing his accomplishments with us here on the board. looks and sounds great



Register or Log In To remove these advertisements.

03-04-2007, 09:00 PM	#21
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Check out my new toy I guess some of us are a little foolish.I had a complete motor for sale with with headers .I set it on the shop floor ,run a rubber hose from the fuel pump to a gas can,water hose in thermo housing .hot wire to electronic distributor from battery on the floor and turned starter over with jumper cables to same battery.Buyer had $1000 cash and wanted to here it run.It may have been foolish but it only took a few minutes and I had $1000.

03-04-2007, 09:15 PM	#22
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: Check out my new toy Sounds mean. As to safety those same 3/8 bolts holds it when it is a car so where is that unsafe. The front is carrying it's own weight on the 2 by. If you think that is unsafe why would you think it is safe when it is hanging free with just those 4 bolts. Looks safe to me. Crank er off!!!! __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

03-04-2007, 10:08 PM	#24
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: Check out my new toy Heck if it wasnt for dangerous foolish things id never have any fun. And i got a boy that makes the things i do look safe.

03-04-2007, 10:38 PM	#25
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: Check out my new toy GO TEAM...GO TEAM

Register or Log In To remove these advertisements.