Berlin Tonneau Cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jrcaprai · 04-01-2011, 11:31 AM

Please stay tuned more to come !!!

ds350 · 04-01-2011, 11:48 AM

Good luck!

jrcaprai · 04-01-2011, 12:17 PM

Quote:

Originally Posted by ds350

Good luck!

Is it that bad ????

GmtGmt · 04-01-2011, 12:18 PM

wrong name for an american company...

jrcaprai · 04-03-2011, 02:21 PM

Well I got the Tonneau cover set on the Bed, but not attached... the instructions suck!
they tell you how to assemble the frame and attach the cover to the frame, but not how to attach the frame to the bed. So it looks as though I may have to drill through the frame on the sides into the bed rails... which sucks, as that is not what I wanted from this... and not what they advertise. Maybe you can use the clamps on a fleet-side but not on a Step-side. It does look pretty good though! IMO

Restrorob · 04-03-2011, 02:41 PM

Here's the instructions for mounting a Extang in a stepper, Maybe they will give some pointers; http://extang.com/pdf/install/0013-Stpsd-CC-88-98.pdf

jrcaprai · 04-03-2011, 04:12 PM

Quote:

Originally Posted by Restrorob

Here's the instructions for mounting a Extang in a stepper, Maybe they will give some pointers; http://extang.com/pdf/install/0013-Stpsd-CC-88-98.pdf

Thanks, thats close, but it looks like its for the 88-98's and they look like they have a lip at the top, where mine is completely flat.

04-01-2011, 11:31 AM	#1
jrcaprai Registered User Join Date: May 2008 Location: Salt Lake City Posts: 365	Berlin Tonneau Cover Please stay tuned more to come !!!

04-01-2011, 11:48 AM	#2
ds350 Registered User Join Date: Jun 2006 Location: CA, Bay Area Posts: 12	Re: Berlin Tonneau Cover Good luck!

04-03-2011, 02:21 PM	#5
jrcaprai Registered User Join Date: May 2008 Location: Salt Lake City Posts: 365	Re: Berlin Tonneau Cover Well I got the Tonneau cover set on the Bed, but not attached... the instructions suck! they tell you how to assemble the frame and attach the cover to the frame, but not how to attach the frame to the bed. So it looks as though I may have to drill through the frame on the sides into the bed rails... which sucks, as that is not what I wanted from this... and not what they advertise. Maybe you can use the clamps on a fleet-side but not on a Step-side. It does look pretty good though! IMO

04-03-2011, 02:41 PM	#6
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Berlin Tonneau Cover Here's the instructions for mounting a Extang in a stepper, Maybe they will give some pointers; http://extang.com/pdf/install/0013-Stpsd-CC-88-98.pdf __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.