SC Suicide Doors suspension and frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2wd73blazer · 02-19-2010, 11:01 PM

This is a swb frame. I believe it came from a 70 but it could have been 69. It has the SD P-47 front crossmember, SD tubular upper and lower control arms, SD rear wishbone lift kit, Belltech lowering spindles, Dominator 2600 air bags at all four corners, and new power rack and pinion from Summit. The rear end is a posi trac. The frame was sandblasted and painted with SEM Rustshield prior to installing the suspension parts so it will need to be repainted. This frame will lay on the ground. The rear kit is not fully installed. You need to install the motor and trans so you can set the pinion angle before welding the rear arm brackets on the rear end. $3300.

2wd73blazer · 02-19-2010, 11:04 PM

more pics

51 68CHEVY · 02-20-2010, 06:32 PM

Nice frame heres a bump

**BIG ORANGE** · 02-20-2010, 11:08 PM

The title reads suicide doors also, so where are the door kits or am I wrong?
Are you parting the deal out or is it a complete package?
Thanks

JHT67 · 02-20-2010, 11:14 PM

Quote:

Originally Posted by BIG ORANGE

The title reads suicide doors also, so where are the door kits or am I wrong?
Are you parting the deal out or is it a complete package?
Thanks

possibly, suicide doors is the company that made the suspension parts, they are a fab company.

bustedcustoms · 02-20-2010, 11:30 PM

man thats sweet dont know why you'd sell it. I wish I had the money thats got everything I want to put on my frame.

2wd73blazer · 02-21-2010, 01:50 PM

Thanks for the compliments. Suicide Doors is the company that I bought these parts from. I would like to sell it as a package if possible.

2wd73blazer · 02-24-2010, 07:03 AM

ttt

2wd73blazer · 02-26-2010, 10:01 AM

ttt

shaneo2112RUSH · 02-27-2010, 07:18 AM

If you decide to part, i be interested in some parts but till then, here's a bump for ya!! Very good deal indeed!!

just wish i had the full $4,000 and a way to get it here or i'll be all over it!!

2wd73blazer · 03-07-2010, 04:37 PM

ttt

2wd73blazer · 03-14-2010, 08:16 PM

I would like to sell this whole. Any offers?

VA72C10 · 03-14-2010, 09:20 PM

Know of any way to get it up to VA? The more this sits...the more I want it...

2wd73blazer · 03-14-2010, 09:24 PM

How far are you from Augusta, Ga. I have a car trailer.

VA72C10 · 03-14-2010, 09:36 PM

Looks like 7 hours...

2wd73blazer · 03-14-2010, 09:42 PM

I can deliver it if you pay for the gas.

VA72C10 · 03-14-2010, 10:30 PM

Alright, let me think about it and check on some things. I'd have to unload my shortbed frame I have now to have room...If you have another offer before, let them have it. Thanks for the offer to deliver though

2wd73blazer · 03-22-2010, 08:16 AM

ttt

2wd73blazer · 03-25-2010, 08:25 PM

ttt

2wd73blazer · 03-30-2010, 04:58 PM

ttt

PAINTERDAVE · 03-30-2010, 09:38 PM

Ttt

m6z · 04-01-2010, 08:41 AM

If only you were not 15hrs away...

2wd73blazer · 04-10-2010, 09:39 PM

new price $3500

VA72C10 · 04-10-2010, 10:33 PM

man, you are KILLING me

I really want to lay frame with my shaved cab truck but no interest in either of my frames either....it's a tough market out there...

2wd73blazer · 04-18-2010, 05:41 PM

ttt

02-19-2010, 11:01 PM	#1
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Suicide Doors suspension and frame This is a swb frame. I believe it came from a 70 but it could have been 69. It has the SD P-47 front crossmember, SD tubular upper and lower control arms, SD rear wishbone lift kit, Belltech lowering spindles, Dominator 2600 air bags at all four corners, and new power rack and pinion from Summit. The rear end is a posi trac. The frame was sandblasted and painted with SEM Rustshield prior to installing the suspension parts so it will need to be repainted. This frame will lay on the ground. The rear kit is not fully installed. You need to install the motor and trans so you can set the pinion angle before welding the rear arm brackets on the rear end. $3300. Attached Images Last edited by 2wd73blazer; 05-12-2010 at 06:56 PM. Reason: lowered price

02-19-2010, 11:04 PM	#2
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame more pics Attached Images

02-20-2010, 06:32 PM	#3
51 68CHEVY Registered User Join Date: Feb 2005 Location: ATCO N.J. Posts: 536	Re: Suicide Doors suspension and frame Nice frame heres a bump Last edited by 51 68CHEVY; 02-20-2010 at 06:33 PM.

02-20-2010, 11:08 PM	#4
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	Re: Suicide Doors suspension and frame The title reads suicide doors also, so where are the door kits or am I wrong? Are you parting the deal out or is it a complete package? Thanks __________________ Things happen for a reason!

02-20-2010, 11:30 PM	#6
bustedcustoms Registered User Join Date: Jan 2008 Location: great bend kansas Posts: 10	Re: Suicide Doors suspension and frame man thats sweet dont know why you'd sell it. I wish I had the money thats got everything I want to put on my frame.

02-21-2010, 01:50 PM	#7
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame Thanks for the compliments. Suicide Doors is the company that I bought these parts from. I would like to sell it as a package if possible. Last edited by 2wd73blazer; 02-21-2010 at 01:50 PM.

02-24-2010, 07:03 AM	#8
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame ttt

02-26-2010, 10:01 AM	#9
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame ttt

02-27-2010, 07:18 AM	#10
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: Suicide Doors suspension and frame If you decide to part, i be interested in some parts but till then, here's a bump for ya!! Very good deal indeed!! just wish i had the full $4,000 and a way to get it here or i'll be all over it!! __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

03-07-2010, 04:37 PM	#11
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame ttt

03-14-2010, 08:16 PM	#12
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame I would like to sell this whole. Any offers?

03-14-2010, 09:20 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Suicide Doors suspension and frame Know of any way to get it up to VA? The more this sits...the more I want it... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-14-2010, 09:24 PM	#14
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame How far are you from Augusta, Ga. I have a car trailer.

03-14-2010, 09:36 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Suicide Doors suspension and frame Looks like 7 hours... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-14-2010, 09:42 PM	#16
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame I can deliver it if you pay for the gas.



Register or Log In To remove these advertisements.

03-14-2010, 10:30 PM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Suicide Doors suspension and frame Alright, let me think about it and check on some things. I'd have to unload my shortbed frame I have now to have room...If you have another offer before, let them have it. Thanks for the offer to deliver though __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-22-2010, 08:16 AM	#18
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame ttt

03-25-2010, 08:25 PM	#19
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame ttt

03-30-2010, 04:58 PM	#20
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame ttt

03-30-2010, 09:38 PM	#21
PAINTERDAVE Registered User Join Date: Sep 2008 Location: winston salem north carolina Posts: 59	Re: Suicide Doors suspension and frame Ttt __________________ painterdave

04-01-2010, 08:41 AM	#22
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Suicide Doors suspension and frame If only you were not 15hrs away... __________________ Doug Looking for a 67-72 short bed driver.....

04-10-2010, 09:39 PM	#23
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame new price $3500

04-10-2010, 10:33 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Suicide Doors suspension and frame man, you are KILLING me I really want to lay frame with my shaved cab truck but no interest in either of my frames either....it's a tough market out there... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-18-2010, 05:41 PM	#25
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Suicide Doors suspension and frame ttt

Register or Log In To remove these advertisements.