![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Motorhome Tilt Column, bolt in ready
$250 local, $300 shipped
Please respond in thread only per board rules, first "I'll take it" gets it. Selling a motorhome tilt column. From a mid 80s GM chassis I moved the NSS down so it's a bolt-in for your 67-72; I used my multi-meter to adjust it, you may need to fine tune it after install. Turn signal has no lever, your original will fit Turn signal switch is tight and cancels as it should. Includes the pigtail with the flat wire end so you can modify your harness for the newer style switches. Includes the cancel cam The gray illumination wire is fairly long Includes a long pigtail for the Neutral Safety/Reverse switch Tilt mechanism is tight and smooth. The 4 bolts in the tilt mechanism that typically loosen over time have been removed and reinstalled with lock-tight. Tilt pivots were cleaned and lubed when removed to tighten the bolts. The bottom bearing was cleaned and greased The upper bearings were cleaned and greased The shift indicator bulb was replaced and tested OK, it has the green shade on it. Shifter lever end (inside column) is good, pivot is average Shift arm and adjuster lever have decent chrome, they shine up well. The finish on it is OK, great for a driver. Some scratches and wear as pictured. I will include a new GMC Paul's gear indicator. You will need to add your dash and firewall gaskets, as well as the firewall plate. The new gaskets will stretch over the shift arm. Old ones may split. **I will ship it with the levers and indicator housing removed to avoid shipping damage** There is a trick to getting the indicator housing and pointer on, I can go over it with you if needed.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 08-16-2020 at 02:22 PM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Re: Motorhome Tilt Column, bolt in ready
More pics
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Aug 2014
Location: Blue Ridge,GA
Posts: 508
|
Re: Motorhome Tilt Column, bolt in ready
How will this work in a 1965 c10? Or should I look for something different.
__________________
1965 C10 LS2/4l70, WHITE, 5/7 DROP LINK TO SUPER SNOOPY C10 BUILD---> http://67-72chevytrucks.com/vboard/s...d.php?t=689283 1977 C10 SILVERADO HAWAIIAN BLUE, 5/5" DROP, LS6/4L80E 1976 CHEVY K5, 350/350, YUBA GOLD/SADDLE |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Re: Motorhome Tilt Column, bolt in ready
I honestly don’t know.
You might post up on the 60-66 area and see if anyone has an answer.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Jan 2012
Location: Mt Nebo WV
Posts: 1,335
|
Re: Motorhome Tilt Column, bolt in ready
I have this column installed in my 64 c10. I have a new wiring harness installed and used a Lokar shifter cable. Here are some pictures
__________________
https://paypal.me/DMorris6870 |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,752
|
Re: Motorhome Tilt Column, bolt in ready
Clay if it will go right in a 72 and work.......
PM me Thanxs
__________________
Things happen for a reason! Last edited by BIG ORANGE; 08-18-2020 at 02:11 PM. |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Re: Motorhome Tilt Column, bolt in ready
Yes it will, you just need to connect the wiring.
Sold to Big Orange PM sent
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,752
|
Re: Motorhome Tilt Column, bolt in ready
Thanks for understanding,,,
__________________
Things happen for a reason! |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Re: Motorhome Tilt Column, bolt in ready
Big Orange has bowed out, best of luck to him and his.
Back up for sale
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Dec 2010
Location: Mars Hill, NC
Posts: 1,994
|
Re: Motorhome Tilt Column, bolt in ready
Im interested in this...can you pm me about the wiring details?
|
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Re: Motorhome Tilt Column, bolt in ready
Sure
The wiring colors and pin positions are the same for early and later turn signal switches. The old style has a half-round connector and the new style is flat. New replacement switches come with the flat to half-round adapter. You can also splice in the pigtail end that I'm including. That updates your truck harness to the flat style connector. I think you can buy the flat to round adapter separately. The neutral/reverse switch wiring is similar. Splice it in as necessary. If you have an auto column already you can just swap the connector since it is slightly different. If it's a manual then you can use the pigtail to wire them in.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Dec 2010
Location: Mars Hill, NC
Posts: 1,994
|
Re: Motorhome Tilt Column, bolt in ready
I'll take it
|
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Re: Motorhome Tilt Column, bolt in ready
Sold to Leroy-B1
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Re: Motorhome Tilt Column, bolt in ready
Back to the top, the deal fell thru.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: Jun 2005
Location: Modesto, CA
Posts: 786
|
Re: Motorhome Tilt Column, bolt in ready
if you can do $275 shipped to zip 95356 i will take it. thanks for the consideration.
__________________
Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty |
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Re: Motorhome Tilt Column, bolt in ready
Sure, I can do that
PM sent
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#17 |
Senior Member
![]() Join Date: Jun 2005
Location: Modesto, CA
Posts: 786
|
Re: Motorhome Tilt Column, bolt in ready
__________________
Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty |
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,949
|
Re: Motorhome Tilt Column, bolt in ready
Shipping it out today
Thanks again
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
column, comfort tilt, motor home, tilt |
|
|