Digging Holes For Shop Today! - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swamp rat · 01-08-2015, 05:50 AM

Thanks for the links! The Air and water link is what i needed.

I'm most interested in the G73 or Dimplex CUHO5B31T because they are ceiling mountable but they are required to be hard wired, i need to be able to plug it into the same outlet as my welder (preferred) or the dryer outlet, I know i could make both heaters plugable, both of my plug outlets are 30 amp outlets and the heaters require 21, don't know how risky that would be... may have to call Dave!

NONHOG · 04-22-2015, 05:11 PM

Lines are done! Now I have to decide which first filter or dryer?
Me and my boy did some wire wheeling the other day w/o filter or dryer and it was dry as can be. So nice! Before I was running a hose right off a regulator/dryer mounted to the compressor. Constant dripping, was a real pain.

So which first filter or dryer? I'll want the filter for my new toy.
"plasma cutter!"

Too bad it requires 220. My compressor requires 220. The plasma requires compressed air. I only have one 220 outlet. Looks like I get to add another
outlet. Not a bad thing.
For now I'll borrow a buds portable 110 compressor.

NONHOG · 12-04-2015, 07:17 PM

Snagged these off a building that was torn down. The day I got them is the day they got torn. Ah well, character.

Now I have to hang them.

drfloyd · 12-04-2015, 10:34 PM

Nice shop. You've done a ton of work, or someone has. Just curious, where did you install the small roll up door. I used 10 foot roll ups in my shop. I have 3 of them and I really like them. I've always been curious as to why they aren't used more often in new shop projects. They are a real overhead space saver and you don't have to worry about doors blocking your lights.

NONHOG · 12-04-2015, 10:39 PM

Thanks! I ended up moving my stair case and it took up the space where the roll up doo was to go. I ended up selling it. Lots of work left. I just go in waves of energy/money/time. Hard to have all at once.

**Palf70Step** · 12-05-2015, 10:19 AM

That will add some additional pizzazz to a good piston heads shop!

NONHOG · 12-23-2015, 06:38 PM

Thanks Bill, not a real old sign but I like it. Still waiting for me to hang it up.

01-08-2015, 05:50 AM	#1
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Digging Holes For Shop Today! Thanks for the links! The Air and water link is what i needed. I'm most interested in the G73 or Dimplex CUHO5B31T because they are ceiling mountable but they are required to be hard wired, i need to be able to plug it into the same outlet as my welder (preferred) or the dryer outlet, I know i could make both heaters plugable, both of my plug outlets are 30 amp outlets and the heaters require 21, don't know how risky that would be... may have to call Dave! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-22-2015, 05:11 PM	#2
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: Digging Holes For Shop Today! Lines are done! Now I have to decide which first filter or dryer? Me and my boy did some wire wheeling the other day w/o filter or dryer and it was dry as can be. So nice! Before I was running a hose right off a regulator/dryer mounted to the compressor. Constant dripping, was a real pain. So which first filter or dryer? I'll want the filter for my new toy. "plasma cutter!" Too bad it requires 220. My compressor requires 220. The plasma requires compressed air. I only have one 220 outlet. Looks like I get to add another outlet. Not a bad thing. For now I'll borrow a buds portable 110 compressor. Attached Images __________________ "I feel the need for speed!"... as soon as I am done with my nap.

12-04-2015, 07:17 PM	#3
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: Digging Holes For Shop Today! Snagged these off a building that was torn down. The day I got them is the day they got torn. Ah well, character. Now I have to hang them. Attached Images __________________ "I feel the need for speed!"... as soon as I am done with my nap.

12-04-2015, 10:34 PM	#4
drfloyd Registered User Join Date: Sep 2015 Location: Scranton, SC Posts: 248	Re: Digging Holes For Shop Today! Nice shop. You've done a ton of work, or someone has. Just curious, where did you install the small roll up door. I used 10 foot roll ups in my shop. I have 3 of them and I really like them. I've always been curious as to why they aren't used more often in new shop projects. They are a real overhead space saver and you don't have to worry about doors blocking your lights.

12-04-2015, 10:39 PM	#5
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: Digging Holes For Shop Today! Thanks! I ended up moving my stair case and it took up the space where the roll up doo was to go. I ended up selling it. Lots of work left. I just go in waves of energy/money/time. Hard to have all at once. __________________ "I feel the need for speed!"... as soon as I am done with my nap.

12-05-2015, 10:19 AM	#6
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,695	Re: Digging Holes For Shop Today! That will add some additional pizzazz to a good piston heads shop! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-23-2015, 06:38 PM	#7
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: Digging Holes For Shop Today! Thanks Bill, not a real old sign but I like it. Still waiting for me to hang it up. __________________ "I feel the need for speed!"... as soon as I am done with my nap.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.