Wasn't there a thread..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**grumpy** · 11-10-2008, 01:53 AM

Asking for pics of bagged 60-66 trucks using just drop spindles and bags or just bags alone?

I love the dropmember set-ups, but more interested right now in bagging a stock 63 frontend. Maybe adding drop spindles.

Just kicking something around.

c10addict · 11-10-2008, 12:04 PM

Get off the money and put a dropmember on it!!

**grumpy** · 11-10-2008, 05:09 PM

haha. Dude, I'm so broke. It's crazy that I'm even buying another truck since I've been laid-off since march....
But, if I don't spend some of my severance money, then I have nothing to show for it.

jmedero · 11-10-2008, 07:29 PM

what do drop members cost? Are they still req if you do a ZZZZZZ notch...

c10addict · 11-10-2008, 09:39 PM

$999.00 for the dropmember plus about another $500.00 for the rest of the stuff to make it work..

jmedero · 11-10-2008, 09:55 PM

so when you do a drop member what else is needed to put the front end in the weedz?

c10addict · 11-10-2008, 10:06 PM

drop in over the suspension forum and look for the post $999.00 for a dropmember or just search dropmember.. lots of info out there... Heres two pics of mine with a dropmember, ART arms and drop spindles

66chevy PROSTREET · 11-10-2008, 10:38 PM

Quote:

Originally Posted by c10addict

drop in over the suspension forum and look for the post $999.00 for a dropmember or just search dropmember.. lots of info out there... Heres two pics of mine with a dropmember, ART arms and drop spindles

THE more i look at your truck and others that sit on the ground, my wifes christmas present gets smaller and i get closer to pulling the trigger on a drop member

c10addict · 11-11-2008, 04:35 PM

Quote:

Originally Posted by 66chevy PROSTREET

THE more i look at your truck and others that sit on the ground, my wifes christmas present gets smaller and i get closer to pulling the trigger on a drop member

I thought you were gonna say sand through the paint in a bunch of spots, letter it up and let it sit outside and get rusty....

I love your truck!! I am ready to pull the trigger on a dropmember for my 68 but hate to blow it back apart...

**grumpy** · 02-16-2009, 05:32 PM

bttt

I want to see just bagged stock frontend trucks.

No money for anything, but I have bags already.

Plus I need to do a flipkit on the rear, since its a GMC with leafs.

protrash64 · 02-16-2009, 10:37 PM

Hey grumpy, heres my 'burb. Its got 73+ a-arms, 2.5" spindles and re7's in the front. The back is sitting on a 1/2" bumpstop....no notch. Roughly 29" tall tires.

joe231 · 02-17-2009, 12:13 AM

Quote:

Originally Posted by protrash64

Hey grumpy, heres my 'burb. Its got 73+ a-arms, 2.5" spindles and re7's in the front. The back is sitting on a 1/2" bumpstop....no notch. Roughly 29" tall tires.

love it!!

protrash64 · 02-17-2009, 01:24 AM

Thanx Joe.

**grumpy** · 02-18-2009, 12:21 AM

Thanks Pro, but I'm looking for bagged stock 6-lug frontends, on 15" wheels/tires.

I really wanna see how low it will go without anything done except bags.

I don't think theres drop spindles for drum brakes, and I don't have immeadiate plans to convert to disc.

Just wanna bag the front, do a flip kit out back with alittle notch to drive it daily.

joe231 · 02-18-2009, 12:25 AM

your so picky

**grumpy** · 02-18-2009, 12:39 AM

HaHa..I know. Sorry

I've seen a couple pics of trucks with 6-lug, that I think are stock, because the wheels are leaned in...That leads me to think they're not on drop spindles.

Just would like to know what it would look like...

I'm dragging the new turd home this weekend, and wanna hit it hard. Want to be driving by 1st of May.

Thanks all

joe231 · 02-18-2009, 12:49 AM

Imperial Kustom · 02-18-2009, 01:35 AM

I did this one and my 63 GMC with stock spindles, sectioned and reconfigured the crossmember ends, dropped control arms (or recess the 'bag into the arm) and channeled the 62 I Z'd the frame on the GMC 3". I dont need the dropped arms on the GMC though. Maybe I should put some stockers back on for more lift....

ob1monkey · 02-18-2009, 01:42 PM

here is a pic of mine 2.5 drop spindles no cups under the 2600 bags rear has no notch frame on axle with no bump stops. 26 inch tire.

derider · 02-18-2009, 02:09 PM

How do you fasten the bags if there is no cup. I have the drop spindles already and am ready to start work soon. Need to order my bags and trying to decide what brackets or plates I should order. I really like the way your truck sits without the cups.

c10addict · 02-18-2009, 03:31 PM

Hey Grumpy... You know the drill right.... Come monday

ob1monkey · 02-18-2009, 03:42 PM

just a large washer and bolted through the bottm control arm.

joe231 · 02-18-2009, 05:12 PM

Quote:

Originally Posted by c10addict

Hey Grumpy... You know the drill right.... Come monday

I second that!!

protrash64 · 02-18-2009, 06:43 PM

Quote:

Originally Posted by ob1monkey

just a large washer and bolted through the bottm control arm.

I would think you'd get alot of rubbing with that set-up. I cut a 1/2" off my cups to tuck the bag down in there closer.

ob1monkey · 02-18-2009, 06:57 PM

some rubbing but I have had them in there for 3 years with no damage to the bags.

11-10-2008, 01:53 AM	#1
grumpy Registered User Join Date: Feb 2007 Location: NE Ohio Posts: 737	Wasn't there a thread..... Asking for pics of bagged 60-66 trucks using just drop spindles and bags or just bags alone? I love the dropmember set-ups, but more interested right now in bagging a stock 63 frontend. Maybe adding drop spindles. Just kicking something around. __________________ Tim Road Hounds

11-10-2008, 12:04 PM	#2
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Wasn't there a thread..... Get off the money and put a dropmember on it!! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

11-10-2008, 05:09 PM	#3
grumpy Registered User Join Date: Feb 2007 Location: NE Ohio Posts: 737	Re: Wasn't there a thread..... haha. Dude, I'm so broke. It's crazy that I'm even buying another truck since I've been laid-off since march.... But, if I don't spend some of my severance money, then I have nothing to show for it. __________________ Tim Road Hounds

11-10-2008, 07:29 PM	#4
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Wasn't there a thread..... what do drop members cost? Are they still req if you do a ZZZZZZ notch...

11-10-2008, 09:39 PM	#5
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Wasn't there a thread..... $999.00 for the dropmember plus about another $500.00 for the rest of the stuff to make it work.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

11-10-2008, 09:55 PM	#6
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Wasn't there a thread..... so when you do a drop member what else is needed to put the front end in the weedz?

11-10-2008, 10:06 PM	#7
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Wasn't there a thread..... drop in over the suspension forum and look for the post $999.00 for a dropmember or just search dropmember.. lots of info out there... Heres two pics of mine with a dropmember, ART arms and drop spindles Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

02-16-2009, 05:32 PM	#10
grumpy Registered User Join Date: Feb 2007 Location: NE Ohio Posts: 737	Re: Wasn't there a thread..... bttt I want to see just bagged stock frontend trucks. No money for anything, but I have bags already. Plus I need to do a flipkit on the rear, since its a GMC with leafs. __________________ Tim Road Hounds

02-16-2009, 10:37 PM	#11
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Wasn't there a thread..... Hey grumpy, heres my 'burb. Its got 73+ a-arms, 2.5" spindles and re7's in the front. The back is sitting on a 1/2" bumpstop....no notch. Roughly 29" tall tires. Attached Images __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-17-2009, 01:24 AM	#13
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Wasn't there a thread..... Thanx Joe. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-18-2009, 12:21 AM	#14
grumpy Registered User Join Date: Feb 2007 Location: NE Ohio Posts: 737	Re: Wasn't there a thread..... Thanks Pro, but I'm looking for bagged stock 6-lug frontends, on 15" wheels/tires. I really wanna see how low it will go without anything done except bags. I don't think theres drop spindles for drum brakes, and I don't have immeadiate plans to convert to disc. Just wanna bag the front, do a flip kit out back with alittle notch to drive it daily. __________________ Tim Road Hounds

02-18-2009, 12:25 AM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Wasn't there a thread..... your so picky __________________ *CHEVY ONLY*

02-18-2009, 12:39 AM	#16
grumpy Registered User Join Date: Feb 2007 Location: NE Ohio Posts: 737	Re: Wasn't there a thread..... HaHa..I know. Sorry I've seen a couple pics of trucks with 6-lug, that I think are stock, because the wheels are leaned in...That leads me to think they're not on drop spindles. Just would like to know what it would look like... I'm dragging the new turd home this weekend, and wanna hit it hard. Want to be driving by 1st of May. Thanks all __________________ Tim Road Hounds

02-18-2009, 12:49 AM	#17
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Wasn't there a thread..... __________________ *CHEVY ONLY*

02-18-2009, 01:35 AM	#18
Imperial Kustom 100% gearhead Join Date: Apr 2007 Location: Boise, Idaho Posts: 313	Re: Wasn't there a thread..... I did this one and my 63 GMC with stock spindles, sectioned and reconfigured the crossmember ends, dropped control arms (or recess the 'bag into the arm) and channeled the 62 I Z'd the frame on the GMC 3". I dont need the dropped arms on the GMC though. Maybe I should put some stockers back on for more lift.... Attached Images



Register or Log In To remove these advertisements.

02-18-2009, 01:42 PM	#19
ob1monkey Registered User Join Date: Dec 2008 Location: sanford,fl Posts: 185	Re: Wasn't there a thread..... here is a pic of mine 2.5 drop spindles no cups under the 2600 bags rear has no notch frame on axle with no bump stops. 26 inch tire.

02-18-2009, 02:09 PM	#20
derider Registered User Join Date: Feb 2009 Location: Deforest, WI Posts: 90	Re: Wasn't there a thread..... How do you fasten the bags if there is no cup. I have the drop spindles already and am ready to start work soon. Need to order my bags and trying to decide what brackets or plates I should order. I really like the way your truck sits without the cups.

02-18-2009, 03:31 PM	#21
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Wasn't there a thread..... Hey Grumpy... You know the drill right.... Come monday __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

02-18-2009, 03:42 PM	#22
ob1monkey Registered User Join Date: Dec 2008 Location: sanford,fl Posts: 185	Re: Wasn't there a thread..... just a large washer and bolted through the bottm control arm.

02-18-2009, 06:57 PM	#25
ob1monkey Registered User Join Date: Dec 2008 Location: sanford,fl Posts: 185	Re: Wasn't there a thread..... some rubbing but I have had them in there for 3 years with no damage to the bags.

Register or Log In To remove these advertisements.