Djm flip kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

80sbc · 11-13-2010, 06:44 PM

Just installed a djm flip kit will drop the front in the morning. How many coils should i cut to level the truck out? Thanks in advance.

Posted via Mobile Device

**lolife99** · 11-13-2010, 06:47 PM

As a general rule,... I use this formula:
1/2 coil = 1" of drop.

cor86 · 11-14-2010, 11:36 AM

I also used the DJM flip kit and found that 1/2 coil, along with DJM's 3" spindles, will make it level. Hope that helps.

mooseknuckles · 11-14-2010, 01:12 PM

I cut off one coil and 3" drop spindles for a slight rake.

1LowToy · 11-14-2010, 10:52 PM

Not to hijack a thread. Can I go 3/4 coil? Any pics? I have a few days off for TG and I think I can do the drop then as I think I'll have my goodies in order.

SuperNova22 · 11-15-2010, 12:48 AM

Is that the 5" DJM flip kit? Did you need to install c-notches?

flamingbig10 · 11-15-2010, 01:49 AM

Quote:

Originally Posted by 1LowToy

Not to hijack a thread. Can I go 3/4 coil? Any pics? I have a few days off for TG and I think I can do the drop then as I think I'll have my goodies in order.

I'd say go the full coil from the stock coil but any more the coils will fall out of the spring pockets when you lift the front of the truck up

jasonroman · 11-15-2010, 07:56 AM

Quote:

Originally Posted by SuperNova22

Is that the 5" DJM flip kit? Did you need to install c-notches?

x2?
how hard/easy was install?
no need to take bed off for this kit?

80sbc · 11-15-2010, 12:44 PM

Its the 5" flip kit and i didnt have to take the bed off or c-notch the frame. It was pretty easy. The hardest part was grinding off the old bump stops.
Posted via Mobile Device

3r!c84 · 11-15-2010, 02:25 PM

Get 3 inch drop spindle and cut a coil
Posted via Mobile Device

Silence86 · 11-15-2010, 06:15 PM

is the front lowered at all?

80sbc · 11-15-2010, 06:19 PM

The front is stock height
Posted via Mobile Device

lilpoindexter · 11-15-2010, 10:43 PM

Quote:

Originally Posted by 80sbc

The front is stock height
Posted via Mobile Device

Did you measure the drop on the rear with the flip kit?

11-13-2010, 06:44 PM	#1
80sbc Registered User Join Date: Nov 2009 Location: la/ga Posts: 5	Djm flip kit Just installed a djm flip kit will drop the front in the morning. How many coils should i cut to level the truck out? Thanks in advance. Posted via Mobile Device Attached Images Last edited by 80sbc; 11-14-2010 at 09:45 AM.

11-13-2010, 06:47 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: Djm flip kit As a general rule,... I use this formula: 1/2 coil = 1" of drop. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-14-2010, 11:36 AM	#3
cor86 Registered User Join Date: Mar 2009 Location: Warsaw, IN Posts: 93	Re: Djm flip kit I also used the DJM flip kit and found that 1/2 coil, along with DJM's 3" spindles, will make it level. Hope that helps.

11-14-2010, 01:12 PM	#4
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Djm flip kit I cut off one coil and 3" drop spindles for a slight rake. Last edited by mooseknuckles; 11-14-2010 at 01:13 PM.

11-14-2010, 10:52 PM	#5
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: Djm flip kit Not to hijack a thread. Can I go 3/4 coil? Any pics? I have a few days off for TG and I think I can do the drop then as I think I'll have my goodies in order.

11-15-2010, 12:48 AM	#6
SuperNova22 Registered User Join Date: Mar 2008 Location: Hollister, Ca Posts: 53	Re: Djm flip kit Is that the 5" DJM flip kit? Did you need to install c-notches?

11-15-2010, 12:44 PM	#9
80sbc Registered User Join Date: Nov 2009 Location: la/ga Posts: 5	Re: Djm flip kit Its the 5" flip kit and i didnt have to take the bed off or c-notch the frame. It was pretty easy. The hardest part was grinding off the old bump stops. Posted via Mobile Device

11-15-2010, 02:25 PM	#10
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Djm flip kit Get 3 inch drop spindle and cut a coil Posted via Mobile Device __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

11-15-2010, 06:15 PM	#11
Silence86 Registered User Join Date: Feb 2009 Location: N. Richland Hills Tx Posts: 229	Re: Djm flip kit is the front lowered at all? __________________ 1986 gmc sierra....http://67-72chevytrucks.com/vboard/a...hp?albumid=622

11-15-2010, 06:19 PM	#12
80sbc Registered User Join Date: Nov 2009 Location: la/ga Posts: 5	Re: Djm flip kit The front is stock height Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.