KS 72 Cab for cuts

[Cash3481]

Im cutting this cab up for cuts. No rust above the windo thats visible or showing.
If you see something you need or need cut, let me know.
There is rust halfway on the rocker in towards the undercab brace.
The top WAS perfect until the wind last weekend blew this thing about 15 feet.
Its going away after everything is removed or cut off it.

[orngsikL]

i wouldn't mind getting the roof, but the shipping is going to kill it.

[Cam1968rsss]

Hi, I would be interested in the inner roof where the sun visor bolts on the drivers side. Say from the visor mount to the windshield, visor mount to the cab on the drivers side then 8 inches to the two sides? How much would you need for that section shipped to 77316?

Thanks
Eddie

[Cash3481]

Originally Posted by orngsikL

i wouldn't mind getting the roof, but the shipping is going to kill it.

I'm sure that would not be affordable.

Originally Posted by Cam1968rsss

Hi, I would be interested in the inner roof where the sun visor bolts on the drivers side. Say from the visor mount to the windshield, visor mount to the cab on the drivers side then 8 inches to the two sides? How much would you need for that section shipped to 77316?

Thanks
Eddie

how about I cut it from door jamb to door jamb from windshield to an imaginary line at about 1" past the visor mount then I can cut it shorter for your preference. I'd take $25 for your portion plus shipping.
Mike

[Cam1968rsss]

Hi, those dimensions should work except I need more than 1 inch past the visor mount (going towards the back window). If you could cut it about 3 inches past the visor mount (going towards the back window). Then about the same distance towards the passenger side from the visor mount that should work out just perfect. $25 plus shipping would work for me.

Thanks
Eddie

[Woodnears]

Pm sent on dash panel complete.

[Cash3481]

Originally Posted by Cam1968rsss

Hi, those dimensions should work except I need more than 1 inch past the visor mount (going towards the back window). If you could cut it about 3 inches past the visor mount (going towards the back window). Then about the same distance towards the passenger side from the visor mount that should work out just perfect. $25 plus shipping would work for me.

Thanks
Eddie

Eddie,
So you want the entire piece across the top?
I thought you only wanted the d/s...
I'll cut the entire piece as described above but it will be very expensive to ship that entire piece. I was thinking you wanted the d/s cut at the rearview centerline. I'll cut it this weekend and get you a quote.

Originally Posted by Woodnears

Pm sent on dash panel complete.

returned your pm about the dash. I have several out there.

Thanks guys!

Mike

[Cam1968rsss]

Originally Posted by Cash3481

Eddie,
So you want the entire piece across the top?
I thought you only wanted the d/s...
I'll cut the entire piece as described above but it will be very expensive to ship that entire piece. I was thinking you wanted the d/s cut at the rearview centerline. I'll cut it this weekend and get you a quote.


returned your pm about the dash. I have several out there.

Thanks guys!

Mike

Hi, after looking at my cab last night. The dimensions you were talking about should work. Yes I only need the drivers side. About 1 inch past the visor mount should work okay. If need I can probably send a pic of the area I need.

Thanks
Eddie

[Cash3481]

Originally Posted by Cam1968rsss

Hi, after looking at my cab last night. The dimensions you were talking about should work. Yes I only need the drivers side. About 1 inch past the visor mount should work okay. If need I can probably send a pic of the area I need.

Thanks
Eddie

eddie,
If you need more its fine just let me know!
Mike

[Cam1968rsss]

Originally Posted by Cash3481

eddie,
If you need more its fine just let me know!
Mike

Thanks
Just let me know how much shipping is, and I can paypal you payment.

[serge]

Hello.
My truck has radio opening that was widened. Would like to patch in to correct.
How much for radio area (apprx. 4"H x 11" wide) to 44041?

[Cash3481]

Originally Posted by serge

Hello.
My truck has radio opening that was widened. Would like to patch in to correct.
How much for radio area (apprx. 4"H x 11" wide) to 44041?

Serge,
I believe Randy (Teeitup) has theradio repair panels for a good price.
I have complete dashes for sale. I hope that helps you out.
Mike

[Cam1968rsss]

Hi, if it helps with the shipping coast, If you just cut about 4 inches from the center of the visor mount all the way around, that should take care of what I need to repair.

Thanks
Eddie

[Cash3481]

Originally Posted by Cam1968rsss

Hi, if it helps with the shipping coast, If you just cut about 4 inches from the center of the visor mount all the way around, that should take care of what I need to repair.

Thanks
Eddie

Eddie,
My plan is to cut the inner roof from door jam to door jam 4" past the visor and uo to the windshield. I will cut that piece in half at the rear view mirror area. It does not weigh much but will be in a pretty long box. Ill get it cut tonight and ready to mail out tomorrow. I was a busy guy this weekend so i appologize for the delay.
Mike

[Oldblue68chevy]

Do you still have pieces available from this cab. I need the lower windshield pillar passenger side.

[Mrjuicie35]

How is firewall section where it meets the hood where wire harness lays

[Cash3481]

This cab is gone but I have a 68 cab out there I could maybe cut if there is interest.
Mike

[Oldblue68chevy]

I'd be interested in the passenger side windshield pillar if it's clean. I can get a pic of the areas I need if you want.

[Cash3481]

All,
Ill post some pics tonight of the cab.
Im mowing tonight so it will be around 830-900 before I can ge the pics loaded.

V/R,
Mike

[Cash3481]

I'm closing a deal on several trucks but here is a pic of the wire run area. Rust on the pass side.
Mike