FL Frame cuts, Crossmembers, etc

[chevyguy_72]

I have a partial frame I am getting ready to haul to scrap... its a swb and has been cut behind the front shock mounts... so front shock mounts to back are there... Price will depend on what you are looking for... Also have a front frame crossmember, 2 trailing arm cross members, auto trans cross member, 2 panhard cross members, and one rear cross member... I also have a 67-70 and a 71-72 front cross members with A-Arms, spindles. 71-72 has stock sway bar and brakes... Also have sbc perches. All piece have not been cleaned up... they are the way I pulled them from the truck.

This will mostly be local pickup unless you are wanting a smaller piece...

All prices are obo + the ride (if possible)
71-72 Crossmember w/ parts $300
67-70 crossmember w/parts $200
Frame cuts - depends on what
Trailing arm crossmembers $75
frame/trans crossmembers $40
SBC Perches- $15

[kaphillips]

Is the front sway bar from a 1/2 ton and complete with factory brackets and bolts. If so price shipped to Amarillo TX 79106. Thanks

[chevyguy_72]

I honestly have no idea whats its off of... It was on the my 1/2ton swb truck when I bought it... it was new looking and painted orange... I sprayed it black because it stuck out like a sore thumb... it bolts up in factory locations and with factory hardware... but I cant 100% verify if its a factory piece or aftermarket... I think I have the bushing brackets and the frame pieces as well... what all you interested in? I would say the rubber bushings prob need to be replaced...FYI I will get pics and shipping costs
Thanks

Originally Posted by kaphillips

Is the front sway bar from a 1/2 ton and complete with factory brackets and bolts. If so price shipped to Amarillo TX 79106. Thanks

[chevyguy_72]

More pics

[kaphillips]

Originally Posted by chevyguy_72

I honestly have no idea whats its off of... It was on the my 1/2ton swb truck when I bought it... it was new looking and painted orange... I sprayed it black because it stuck out like a sore thumb... it bolts up in factory locations and with factory hardware... but I cant 100% verify if its a factory piece or aftermarket... I think I have the bushing brackets and the frame pieces as well... what all you interested in? I would say the rubber bushings prob need to be replaced...FYI I will get pics and shipping costs
Thanks

Due to the sway bar's unknown origin and if is a gm oem sway bar I am going to pass. Thanks for your reply and honesty. Have a good one.

[chevyguy_72]

Originally Posted by kaphillips

Due to the sway bar's unknown origin and if is a gm oem sway bar I am going to pass. Thanks for your reply and honesty. Have a good one.

Are there any markings or etc that can be used to identify?

[chevyguy_72]

bump