disassembling fleetside bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pdxhall** · 07-10-2011, 06:40 PM

A quick question for you guys that have done this. I am taking my bed apart. I know there are 4 bolts and 2 welds to deal with. No problem with the bolts and the horizontal weld, but the vertical weld is giving me problems. What methods have you used to do this section. I have a 3" cutoff wheel and 3" grinder, but neither will get in to where I need.

rbar · 07-10-2011, 11:44 PM

I wonder if they are all welded the same way? I did one about two years ago and I think I only used a cutoff wheel. Sounds like a dumb question, but do you have a guard around part of the wheel that can be removed?
Posted via Mobile Device

**pdxhall** · 07-11-2011, 01:29 AM

rbar, Yeah I had a guard on the wheel but it didn't help by taking it off. I solved the problem, though, for 3 bucks and a trip to Harbor Freight. I bought a shaft that hooks up to the collet on my die grinder and has a attachment for a cutoff wheel. That gave me enough clearance to get in where I needed to a cut the welds. My truck is now bedless and ready to continue work on the rear suspension and frame.

07-10-2011, 06:40 PM	#1
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,077	disassembling fleetside bed A quick question for you guys that have done this. I am taking my bed apart. I know there are 4 bolts and 2 welds to deal with. No problem with the bolts and the horizontal weld, but the vertical weld is giving me problems. What methods have you used to do this section. I have a 3" cutoff wheel and 3" grinder, but neither will get in to where I need.

07-10-2011, 11:44 PM	#2
rbar Registered User Join Date: Nov 2010 Location: Meridian, Idaho Posts: 422	Re: disassembling fleetside bed I wonder if they are all welded the same way? I did one about two years ago and I think I only used a cutoff wheel. Sounds like a dumb question, but do you have a guard around part of the wheel that can be removed? Posted via Mobile Device __________________ 1963 Chevy stepside 327 1965 Chevy swb 383 1996 Mystic Mustang Cobra 2009 Pontiac G8 GXP 415hp/415tq 6speed

07-11-2011, 01:29 AM	#3
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,077	Re: disassembling fleetside bed rbar, Yeah I had a guard on the wheel but it didn't help by taking it off. I solved the problem, though, for 3 bucks and a trip to Harbor Freight. I bought a shaft that hooks up to the collet on my die grinder and has a attachment for a cutoff wheel. That gave me enough clearance to get in where I needed to a cut the welds. My truck is now bedless and ready to continue work on the rear suspension and frame.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.