The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-24-2021, 01:05 PM   #1
lintcollector
Registered User
 
Join Date: Sep 2018
Location: West Jordan, UT
Posts: 71
Question 72 C10 CBB Alternator bolt stopped by PS

I've been replacing the battery annually on my truck and the warranty finally ran out on the battery, so I'm replacing the alternator and voltage regulator.

I've got the 402 CBB and both the alternator and power steering are on the driver's side.

The lower alternator bolt runs into the PS wheel.

Is there an easy way aroundv this engineering marvel, or do I need to remove the PS wheel, remove more than the top alternator bracket, or remove the PS out of the way and leave the wheel alone?

Any help greatly appreciated.
__________________
Thx, Lintcollector
'72 C10 Fleetside Big Block

See my build thread here:
http://67-72chevytrucks.com/vboard/s...d.php?t=771552
lintcollector is offline   Reply With Quote
Old 12-24-2021, 01:45 PM   #2
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,721
Re: 72 C10 CBB Alternator bolt stopped by PS

Maybe a pic would help.
geezer#99 is offline   Reply With Quote
Old 12-24-2021, 01:47 PM   #3
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,602
Re: 72 C10 CBB Alternator bolt stopped by PS

I'd say you've got the wrong bracket(s), too long a bolt or the wrong ps pulley. The lower bolt on my truck comes close to the alt belt, but nowhere near the ps pulley
kwmech is offline   Reply With Quote
Old 12-24-2021, 03:02 PM   #4
lintcollector
Registered User
 
Join Date: Sep 2018
Location: West Jordan, UT
Posts: 71
Re: 72 C10 CBB Alternator bolt stopped by PS

Two pics from driver's side
One pic down from the front
Attached Images
   
__________________
Thx, Lintcollector
'72 C10 Fleetside Big Block

See my build thread here:
http://67-72chevytrucks.com/vboard/s...d.php?t=771552
lintcollector is offline   Reply With Quote
Old 12-24-2021, 03:35 PM   #5
garyd1961
Registered User
 
Join Date: May 2016
Location: Henderson NC
Posts: 975
Re: 72 C10 CBB Alternator bolt stopped by PS

Just wondering, did you test the alternator before replacing it. If the alternator wasn't working you would be replacing the battery more often than annually.
Sorry don't really have an answer for you on the bolt other than sometimes you just have to do what you have to do.
garyd1961 is offline   Reply With Quote
Old 12-24-2021, 03:44 PM   #6
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,721
Re: 72 C10 CBB Alternator bolt stopped by PS

Looks like an oversize pulley.
geezer#99 is offline   Reply With Quote
Old 12-24-2021, 04:21 PM   #7
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,602
Re: 72 C10 CBB Alternator bolt stopped by PS

Seriously?? Unbolt the bracket and remove the bolt, then shove it in from the other direction. Mine comes in from the back with the nut in the front
kwmech is offline   Reply With Quote
Old 12-24-2021, 04:28 PM   #8
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,614
Re: 72 C10 CBB Alternator bolt stopped by PS

Remove the PS pump from the bracket and you can get the bolt out. When you put the alternator back on, insert the bolt from the back. The nut is on the front on mine. Don't know if that's factory or not, but the bolt doesn't appear to be able to clear the pulley on my truck, either. BBC 402.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 12-24-2021, 07:03 PM   #9
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,976
Re: 72 C10 CBB Alternator bolt stopped by PS

just curious..
- why did you replace the battery annually until the warranty ran out - was the battery going bad like clockwork every year?
- when the battery warranty ran out, why did that prompt you to replace the alternator and voltage regulator - was there some indication they weren't working?
jocko is offline   Reply With Quote
Old 12-25-2021, 02:26 AM   #10
Accelo
Senior Member
 
Accelo's Avatar
 
Join Date: Mar 2015
Location: washington
Posts: 2,282
Re: 72 C10 CBB Alternator bolt stopped by PS

I had similar issues with battery life till I started using a battery maintainer.
Night and day on how long the battery maintained a charge.
Maybe you are using one already?
If so ignore this posting as it is likely something else.
Accelo is offline   Reply With Quote
Reply

Bookmarks

Tags
alternator


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com