67-72 complete auto conversion + more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 05-09-2007, 07:22 AM

Just picked up a 68 327 turbo 400 truck. I only need the motor/trans. and am going to part the rest. I will sell all automatic related parts to someone wanting to swap out their 3 or 4 speed setup. Steering column (wheel not included), brake pedal, all shift linkage and frame bracket, and auto cross member. $200 plus $65 shipping. Turbo 400 driveshaft will also be available (1/2 ton longbed). $50 plus $25 shipping. Power brake booster $50 plus $20 shipping. New 4 core radiator for automatic $150 plus $25 shipping. CST style E-brake handle cover $20 plus $5 shipping. Power steering box $50 plus $20 shipping. Grill is good best offer. Body is rough. All shipping costs will be actual, if it costs less than my estimate I'll refund if it's more I'll cover it. I will post some pics later today. Paypal preferred. Thanks

jsbgump · 05-09-2007, 09:57 AM

How much for the choke delete?

shaneschevys · 05-09-2007, 10:00 AM

Is the truck a CST? If so how much for the CST emblems off the doors?

Mt Man Chad · 05-09-2007, 10:01 AM

Interested in the Steering wheel, Center cap and horn goodies inside (signal cam, horn mount, and nylon spacer behind horn cap mount) Also interested in the Ebrake handle and the mount to the bottom of the dash.

Luvlegs · 05-09-2007, 11:49 AM

IF you end up breaking it up, I'm looking for the auto linkage for the 400 tranny and the signal cam under the horn cap (plastic disc with posts on it)

killer71 · 05-09-2007, 02:08 PM

Would you sell the top radiator mount brackets.

jlive68 · 05-09-2007, 07:44 PM

how much for the trim rings around the grill. and the head light trim.

*sharpie1972* · 05-09-2007, 09:37 PM

$15 for the choke delete shipped.

*sharpie1972* · 05-09-2007, 09:42 PM

$15 for the CST door emblems shipped. They do have some pits, mounting studs are good.

*sharpie1972* · 05-09-2007, 09:45 PM

$65 shipped for steering wheel and everything on the wheel side of the column.

*sharpie1972* · 05-09-2007, 09:46 PM

I'll let you know if I break up the automatic parts.

*sharpie1972* · 05-09-2007, 09:47 PM

$15 shipped for top radiator brackets.

*sharpie1972* · 05-09-2007, 09:48 PM

$65 shipped for all front trim.

1970bowtie · 05-09-2007, 10:02 PM

is it a large are small journal 327, just wondering, i know its not for sale

HuggerCST · 05-09-2007, 10:07 PM

Interested in the heat riser on the exhaust manifold if it's good and for sale.

jsbgump · 05-09-2007, 10:20 PM

I'll take it. PM me payment details

Quote:

Originally Posted by sharpie1972

$15 for the choke delete shipped.

shaneschevys · 05-10-2007, 12:56 AM

Quote:

Originally Posted by sharpie1972

$15 for the CST door emblems shipped. They do have some pits, mounting studs are good.

I'll take them. Do you take paypal? PM me with payment method

396muncie · 05-10-2007, 08:33 AM

Should be a large journal 327. Every 68(car and truck) and the few 69's(car) I've seen have been large journal.

Mt Man Chad · 05-10-2007, 09:34 AM

Do you take paypal?
If so let me know the address to send the cash to.

Cheers
Chad

Quote:

Originally Posted by sharpie1972

$65 shipped for steering wheel and everything on the wheel side of the column.

Interested in the Steering wheel, Center cap and horn goodies inside (signal cam, horn mount, and nylon spacer behind horn cap mount) Also interested in the Ebrake handle and the mount to the bottom of the dash.

jsbgump · 05-10-2007, 02:02 PM

Payment sent via Paypal

*sharpie1972* · 05-10-2007, 05:32 PM

Payment received. Thank you. I'll ship next week. Dennis

LUV2XCLR8 · 05-10-2007, 06:22 PM

Are you parting everything? Right front fender? How's she look? Interested

68 chevy truck-TPI · 05-10-2007, 06:24 PM

was it a short bed? did it have a one piece driveshaft? might be interested in a good turbo 400 driveshaft.

*sharpie1972* · 05-10-2007, 07:10 PM

Right fender is rough.

*sharpie1972* · 05-10-2007, 07:10 PM

Long bed.

05-09-2007, 07:22 AM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	67-72 complete auto conversion + more Just picked up a 68 327 turbo 400 truck. I only need the motor/trans. and am going to part the rest. I will sell all automatic related parts to someone wanting to swap out their 3 or 4 speed setup. Steering column (wheel not included), brake pedal, all shift linkage and frame bracket, and auto cross member. $200 plus $65 shipping. Turbo 400 driveshaft will also be available (1/2 ton longbed). $50 plus $25 shipping. Power brake booster $50 plus $20 shipping. New 4 core radiator for automatic $150 plus $25 shipping. CST style E-brake handle cover $20 plus $5 shipping. Power steering box $50 plus $20 shipping. Grill is good best offer. Body is rough. All shipping costs will be actual, if it costs less than my estimate I'll refund if it's more I'll cover it. I will post some pics later today. Paypal preferred. Thanks Attached Images Last edited by sharpie1972; 05-10-2007 at 07:12 PM.

05-09-2007, 09:57 AM	#2
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: 67-72 complete auto conversion + more How much for the choke delete? __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

05-09-2007, 10:00 AM	#3
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 67-72 complete auto conversion + more Is the truck a CST? If so how much for the CST emblems off the doors? __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

05-09-2007, 10:01 AM	#4
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: 67-72 complete auto conversion + more Interested in the Steering wheel, Center cap and horn goodies inside (signal cam, horn mount, and nylon spacer behind horn cap mount) Also interested in the Ebrake handle and the mount to the bottom of the dash. __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 05-09-2007 at 05:57 PM.

05-09-2007, 11:49 AM	#5
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 67-72 complete auto conversion + more IF you end up breaking it up, I'm looking for the auto linkage for the 400 tranny and the signal cam under the horn cap (plastic disc with posts on it) __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

05-09-2007, 02:08 PM	#6
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: 67-72 complete auto conversion + more Would you sell the top radiator mount brackets. __________________ R.I.P. Killer 71 10/26/07

05-09-2007, 07:44 PM	#7
jlive68 Senior Member Join Date: Apr 2004 Location: Greenville, Tx. Posts: 286	Re: 67-72 complete auto conversion + more how much for the trim rings around the grill. and the head light trim. __________________ 1968 chevy U.S. Navy

05-09-2007, 09:37 PM	#8
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 67-72 complete auto conversion + more $15 for the choke delete shipped.

05-09-2007, 09:42 PM	#9
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 67-72 complete auto conversion + more $15 for the CST door emblems shipped. They do have some pits, mounting studs are good. Attached Images

05-09-2007, 09:45 PM	#10
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 67-72 complete auto conversion + more $65 shipped for steering wheel and everything on the wheel side of the column.

05-09-2007, 09:46 PM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 67-72 complete auto conversion + more I'll let you know if I break up the automatic parts.

05-09-2007, 09:47 PM	#12
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 67-72 complete auto conversion + more $15 shipped for top radiator brackets.

05-09-2007, 09:48 PM	#13
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 67-72 complete auto conversion + more $65 shipped for all front trim.

05-09-2007, 10:02 PM	#14
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: 67-72 complete auto conversion + more is it a large are small journal 327, just wondering, i know its not for sale __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

05-09-2007, 10:07 PM	#15
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: 67-72 complete auto conversion + more Interested in the heat riser on the exhaust manifold if it's good and for sale. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com



Register or Log In To remove these advertisements.

05-10-2007, 08:33 AM	#18
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: 67-72 complete auto conversion + more Should be a large journal 327. Every 68(car and truck) and the few 69's(car) I've seen have been large journal. __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

05-10-2007, 02:02 PM	#20
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: 67-72 complete auto conversion + more Payment sent via Paypal __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

05-10-2007, 05:32 PM	#21
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 67-72 complete auto conversion + more Payment received. Thank you. I'll ship next week. Dennis

05-10-2007, 06:22 PM	#22
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: 67-72 complete auto conversion + more Are you parting everything? Right front fender? How's she look? Interested __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-10-2007, 06:24 PM	#23
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	Re: 67-72 complete auto conversion + more was it a short bed? did it have a one piece driveshaft? might be interested in a good turbo 400 driveshaft.

05-10-2007, 07:10 PM	#24
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 67-72 complete auto conversion + more Right fender is rough.

Register or Log In To remove these advertisements.