Need help finding the front e-brake cable for '71 C20 Longhorn. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ahsom79vette · 06-03-2009, 05:15 PM

i have looked everywhere and cannot find the front cable that attaches to the e-brake pedal (i snapped the original). my truck is a 1971 chevrolet c20 longhorn w/ TH400. thanks for any help.

djbnola · 11-25-2013, 03:09 PM

Hello, I know it has been awhile since you posted looking for an ebrake cable. Can I ask if you ever found it. I am looking for the same cable.
Thanks,

ahsom79vette · 11-26-2013, 01:53 AM

Hi,
This is so weird b/c I haven't checked this thread in years.
Since no one ever answered, I haven't done anything. Just keep parking on as close to level as possible.
I searched all the suppliers I could find and no replacement. Not sure what to think?

Anybody? Ideas?

**leddzepp** · 11-26-2013, 02:04 AM

Iirc the front ebrake cable is the same for all 69-72 trucks. I converted my 72 3/4 long bed into a SWB 1/2 ton (swapped frames) and used the original front cable (from pedal to frame rail)

68shortfleet · 11-26-2013, 05:06 AM

Try contacting these guys. Bruin brake cable. http://www.ebay.com/usr/bruinbrakecables
I ordered rear cables for a 72 swb, they appear to be very well made product. I seem to recall a piece of literature coming with my cables saying that they can make almost any cable.

cheyenne shortstep · 11-26-2013, 04:15 PM

leddzepp is correct in that all 69-72 use the same cable, I have a few good used. PM sent

1972SUPERSB · 11-26-2013, 04:27 PM

Here is the one I used. It's AC delco and fit great. Fits 1972 truck as per AC delco website.

ahsom79vette · 11-26-2013, 10:56 PM

Thanks guys. I'm going to look into this.

ahsom79vette · 11-26-2013, 11:10 PM

Thanks guys. I'm going to look into this. I do forget some as it has been so long, but originally I checked the LMC catalog.

This is what confused me: The only one close is part #34-3824 (for a 69-72, 2wd 3/4 ton, W/OUT the TH400)
But mine has the TH400?
Here's the page: Front cables are listed under (3).
Name: 0157.jpg
Views: 430
Size: 111.3 KB

Name: 0157.jpg
Views: 430
Size: 111.3 KB

**Also notice there two part #'s listed for these trucks (34-3820, 34-3824)**

**DaHos** · 11-27-2013, 10:27 AM

Right here ........ http://inlinetube.com/Brake%20Cables...ruck/FT435.htm

ahsom79vette · 11-27-2013, 10:57 AM

Quote:

Originally Posted by DaHos

Right here ........ http://inlinetube.com/Brake%20Cables...ruck/FT435.htm

Thanks!
A little pricy @ $55.

ahsom79vette · 11-27-2013, 11:26 AM

Quote:

Originally Posted by ahsom79vette

Thanks!
A little pricy @ $55.

I think this is the route I'll have to go.
I've checked:
-Classic Industries
-Brothers
-LMC
and all of don't sell a front parking cable for a BB w/TH400...

**DaHos** · 11-27-2013, 11:31 AM

Check *bay, Inline tube sells on there for list but I do see some other vendors for slightly less on some parts.

**leddzepp** · 11-27-2013, 12:22 PM

The th400 has no bearing on the size of the cable. Like I said they are all the same. The different part number listed is for 67-68 trucks, which use a pull handle to activate the e brake as opposed to a pedal.

ahsom79vette · 11-27-2013, 03:06 PM

Quote:

Originally Posted by leddzepp

The th400 has no bearing on the size of the cable. Like I said they are all the same. The different part number listed is for 67-68 trucks, which use a pull handle to activate the e brake as opposed to a pedal.

Thanks, I guess you should know you have the same eng./trans. as me!

I think you can see where I am confused though. All the one's I found kept saying w/out T400. Didn't make since to me... Oh well...

cheyenne shortstep · 11-27-2013, 03:22 PM

The intermediate cable is different on TH400 equipped trucks as it attaches to the trans crossmember instead of using the rods that go to the frame. It is not necessary to use this setup when using a TH400 but it is "correct".

cheyenne shortstep · 11-27-2013, 03:29 PM

The intermediate cable is different on TH400 equipped trucks as it attaches to the trans crossmember instead of using the rods that go to the frame. It is not necessary to use this setup when using a TH400 but it is "correct".

06-03-2009, 05:15 PM	#1
ahsom79vette Registered User Join Date: Jun 2009 Location: ALASKA Posts: 48	Need help finding the front e-brake cable for '71 C20 Longhorn. i have looked everywhere and cannot find the front cable that attaches to the e-brake pedal (i snapped the original). my truck is a 1971 chevrolet c20 longhorn w/ TH400. thanks for any help.

11-25-2013, 03:09 PM	#2
djbnola Registered User Join Date: May 2013 Location: Ponchatoula, LA Posts: 3	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. Hello, I know it has been awhile since you posted looking for an ebrake cable. Can I ask if you ever found it. I am looking for the same cable. Thanks,

11-26-2013, 02:04 AM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,024	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. Iirc the front ebrake cable is the same for all 69-72 trucks. I converted my 72 3/4 long bed into a SWB 1/2 ton (swapped frames) and used the original front cable (from pedal to frame rail) __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-26-2013, 05:06 AM	#5
68shortfleet Registered User Join Date: Oct 2006 Location: Dundee, Oregon Posts: 311	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. Try contacting these guys. Bruin brake cable. http://www.ebay.com/usr/bruinbrakecables I ordered rear cables for a 72 swb, they appear to be very well made product. I seem to recall a piece of literature coming with my cables saying that they can make almost any cable.

11-26-2013, 04:15 PM	#6
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. leddzepp is correct in that all 69-72 use the same cable, I have a few good used. PM sent

11-26-2013, 01:53 AM	#3
ahsom79vette Registered User Join Date: Jun 2009 Location: ALASKA Posts: 48	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. Hi, This is so weird b/c I haven't checked this thread in years. Since no one ever answered, I haven't done anything. Just keep parking on as close to level as possible. I searched all the suppliers I could find and no replacement. Not sure what to think? Anybody? Ideas? __________________ 1991 Chevy K10, 4x4 ______ Past Rides 1971 Chevy C20 Longhorn (6.6L, 402c.i.); 1973 Chevy K20, 4x4, std. cab, longbed (5.7L); 1979 Chevy Corvette (5.7L); 2001 Chevy Xtreme S-10, ex-cab, 5spd. (4.3L); 2001 Chevy Silverado 2500HD, 4x4, ex-cab, (6.0L); 2002 Chevy Silverado 1500, ex-cab, 4-6drop (4.8L); 2003 Chevy Silverado 1500, 4x4, std. cab, 5spd. (4.8L); 2004 Chevy Colorado Z71, 4x4, crew cab, (3.5L); 2006 HUMMER H3, 4x4, 5spd., (3.5L).

11-26-2013, 04:27 PM	#7
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. Here is the one I used. It's AC delco and fit great. Fits 1972 truck as per AC delco website. Attached Images __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

11-26-2013, 10:56 PM	#8
ahsom79vette Registered User Join Date: Jun 2009 Location: ALASKA Posts: 48	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. Thanks guys. I'm going to look into this. Last edited by ahsom79vette; 11-26-2013 at 11:19 PM.

11-26-2013, 11:10 PM	#9
ahsom79vette Registered User Join Date: Jun 2009 Location: ALASKA Posts: 48	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. Thanks guys. I'm going to look into this. I do forget some as it has been so long, but originally I checked the LMC catalog. This is what confused me: The only one close is part #34-3824 (for a 69-72, 2wd 3/4 ton, W/OUT the TH400) But mine has the TH400? Here's the page: Front cables are listed under (3). Also notice there two part #'s listed for these trucks (34-3820, 34-3824) __________________ 1991 Chevy K10, 4x4 ______ Past Rides 1971 Chevy C20 Longhorn (6.6L, 402c.i.); 1973 Chevy K20, 4x4, std. cab, longbed (5.7L); 1979 Chevy Corvette (5.7L); 2001 Chevy Xtreme S-10, ex-cab, 5spd. (4.3L); 2001 Chevy Silverado 2500HD, 4x4, ex-cab, (6.0L); 2002 Chevy Silverado 1500, ex-cab, 4-6drop (4.8L); 2003 Chevy Silverado 1500, 4x4, std. cab, 5spd. (4.8L); 2004 Chevy Colorado Z71, 4x4, crew cab, (3.5L); 2006 HUMMER H3, 4x4, 5spd., (3.5L). Last edited by ahsom79vette; 11-26-2013 at 11:27 PM.

11-27-2013, 10:27 AM	#10
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. Right here ........ http://inlinetube.com/Brake%20Cables...ruck/FT435.htm __________________ 1967 C10 SWB Owner - Rustbelt Restorations

11-27-2013, 11:31 AM	#13
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. Check *bay, Inline tube sells on there for list but I do see some other vendors for slightly less on some parts. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

11-27-2013, 12:22 PM	#14
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,024	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. The th400 has no bearing on the size of the cable. Like I said they are all the same. The different part number listed is for 67-68 trucks, which use a pull handle to activate the e brake as opposed to a pedal. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul Last edited by leddzepp; 11-27-2013 at 01:01 PM.

11-27-2013, 03:22 PM	#16
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. The intermediate cable is different on TH400 equipped trucks as it attaches to the trans crossmember instead of using the rods that go to the frame. It is not necessary to use this setup when using a TH400 but it is "correct".

11-27-2013, 03:29 PM	#17
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Need help finding the front e-brake cable for '71 C20 Longhorn. The intermediate cable is different on TH400 equipped trucks as it attaches to the trans crossmember instead of using the rods that go to the frame. It is not necessary to use this setup when using a TH400 but it is "correct".



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.