Be WARNED North Texas... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toddtheodd · 09-26-2009, 12:17 AM

This baby is just about ready to drop into my 72 c-10. Oh yeah!!!

355 with Trick Flow 23° aluminum 62cc heads. Comp Cams Extreme Energy 274 hydraulic flat tappet cam. Crane 1.5 Energizer Aluminum full roller rockers. And an Edelbrock Performer RPM intake manifold... Oh my! That should be good for at least what... 200 horse?

Yes yes... I know the carb is dirty.

And yes yes... I know that the water neck looks like crap. Can't decide if I want to change it out to a chrome / brushed aluminum one... or if I want to pull it off and paint it orange to match the rest of the motor... Either way would look good to me.

texanidiot25 · 09-26-2009, 12:24 AM

Beefy.

jsbgump · 09-26-2009, 12:53 AM

Powerfullll

mrein3 · 09-26-2009, 10:03 AM

I painted mine orange.

texas67chevy · 09-26-2009, 10:46 AM

Where in fort worth are you? I live a few miles west of fort worth but i work downtown.

big_al_71 · 09-26-2009, 11:04 AM

looks like it should have potential maybe 205hp

j/k good job!!!

Beefcake · 09-26-2009, 11:15 AM

thats pretty much the set up i have in mine right now. Not bad for upper end power.

toddtheodd · 09-26-2009, 10:00 PM

I just went ahead and got a chrome one... it was only 15 fricken dollars...

Stupid power steering pump. Previous Owner broke the tensioning bolt off in the pump, and it's wedged in there so bad that after I drilled down into it a bit, and put my extractor thingy in it... it actually broke my extractor thingy. And now I can't drill that back out. Grrrr!!!

God I hate previous owners. People must love getting cars after me because I fix so much crap from the people before me.

unclewatts · 09-26-2009, 10:33 PM

Hey Todd! I'll be lookin' for ya in my 96 Toyota Corolla!

prairewolf · 09-27-2009, 07:47 AM

if I had that under the hood I would leave the hood off for a while. after 2 or 3 months my humbleness would kick in and the hood would go back on

looks good. ...kent

toddtheodd · 09-27-2009, 08:05 AM

Quote:

Originally Posted by unclewatts

Hey Todd! I'll be lookin' for ya in my 96 Toyota Corolla!

I was eating breakfast when I read this, and almost choked on my pop-tart

toddtheodd · 09-27-2009, 08:06 AM

Quote:

Originally Posted by texas67chevy

Where in fort worth are you? I live a few miles west of fort worth but i work downtown.

North Richland Hills area.

toddtheodd · 09-27-2009, 08:21 AM

Man... doesn't it suck when you're putting a motor back into a truck and you're like "What plugged into this...?"
I had the distributor cap in hand thinking, "Where is the plug that plugs into this. I see the hot wire, and the tach..." Then it hit me. I don't see the other wires because I haven't stabbed the distributor yet.

**FRENCHBLUE72** · 09-27-2009, 11:17 AM

Looking great.......

Painter D · 09-27-2009, 02:19 PM

I have pretty much the exact same setup on my sbc ,and I can't seem to keep my right foot out of it. You'll like it , I wouldn't trade my Trick Flow heads for any other ones.

fiddy9apache · 09-27-2009, 02:31 PM

lets run them...

should be pretty stout. looks good.

hayhauler71 · 09-27-2009, 02:53 PM

Looks kinda like mine but i would realy like to know where you got the starter heat shield and what compression are you running?

**americanmusc1e** · 09-27-2009, 06:51 PM

I'll run you!!!!

when I got my truck

Yup, like a whole 90 hp

surprisingly, it started

my little SBC

**americanmusc1e** · 09-27-2009, 08:12 PM

Sorry, I forgot the original purpose of my post!!!

NICE MOTOR!!! you will have fun with it!!!!

toddtheodd · 09-27-2009, 08:52 PM

Quote:

Originally Posted by hayhauler71

Looks kinda like mine but i would realy like to know where you got the starter heat shield and what compression are you running?

Starter heat shield from summit. Like 9 dollars or so.

No idea... Went from 76cc chambers to 62cc chambers, and was bored .030 over. Pistons are the dished type with eyebrows in them... so I know I bumped it some, but with the heads being aluminum instead of 500 tons of iron, I should still be running pump gas...

What do you think my compression is? I don't even know what it was stock... Didn't really worry about it to tell you the truth. Know I bumped it up... but don't think by much.

shaneschevys · 09-28-2009, 01:17 AM

What does the truck look like that the engine is going in? Just so I will know who not to mess with!

**americanmusc1e** · 09-28-2009, 07:44 AM

Quote:

Originally Posted by toddtheodd

Starter heat shield from summit. Like 9 dollars or so.

No idea... Went from 76cc chambers to 62cc chambers, and was bored .030 over. Pistons are the dished type with eyebrows in them... so I know I bumped it some, but with the heads being aluminum instead of 500 tons of iron, I should still be running pump gas...

What do you think my compression is? I don't even know what it was stock... Didn't really worry about it to tell you the truth. Know I bumped it up... but don't think by much.

I guess the compression is 9.8 to 1. that's if the piston has a 12cc dish and not a 20cc and the deck is at 0.

Rreemo · 09-28-2009, 12:37 PM

Hey I'm just over by Texas Motor Speedway, I'll take that challenge!

J/K - Good looking powerplant....let's see what it's going into!

clos69 · 09-28-2009, 02:10 PM

Nice Powerplant.....just don't cut in front of me I'll run you over

toddtheodd · 09-28-2009, 05:01 PM

Quote:

Originally Posted by rreemo

good looking powerplant....let's see what it's going into!

a p.o.s...

09-26-2009, 12:17 AM	#1
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Be WARNED North Texas... This baby is just about ready to drop into my 72 c-10. Oh yeah!!! 355 with Trick Flow 23° aluminum 62cc heads. Comp Cams Extreme Energy 274 hydraulic flat tappet cam. Crane 1.5 Energizer Aluminum full roller rockers. And an Edelbrock Performer RPM intake manifold... Oh my! That should be good for at least what... 200 horse? Yes yes... I know the carb is dirty. And yes yes... I know that the water neck looks like crap. Can't decide if I want to change it out to a chrome / brushed aluminum one... or if I want to pull it off and paint it orange to match the rest of the motor... Either way would look good to me. Attached Images __________________ "The greatest pleasure is to vanquish your enemies and chase them before you, to rob them of their wealth and see those dear to them bathed in tears, to ride their horses and clasp to your bosom their wives and daughters." Ghengis Khan IIOY??? Last edited by toddtheodd; 09-26-2009 at 12:27 AM.

09-26-2009, 12:24 AM	#2
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Be WARNED North Texas... Beefy.

09-26-2009, 12:53 AM	#3
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Be WARNED North Texas... Powerfullll __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

09-26-2009, 10:03 AM	#4
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	Re: Be WARNED North Texas... I painted mine orange. Attached Images __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

09-26-2009, 10:46 AM	#5
texas67chevy Registered User Join Date: Apr 2006 Location: Fort Worth, Texas Posts: 18	Re: Be WARNED North Texas... Where in fort worth are you? I live a few miles west of fort worth but i work downtown.

09-26-2009, 11:04 AM	#6
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Be WARNED North Texas... looks like it should have potential maybe 205hp j/k good job!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-26-2009, 11:15 AM	#7
Beefcake Registered User Join Date: Mar 2003 Location: Motor City Posts: 540	Re: Be WARNED North Texas... thats pretty much the set up i have in mine right now. Not bad for upper end power. __________________ 72 GMC Camper Special 2500. currently has 350/350/14 bolt. 383 and 400 tranny is in the works.

09-26-2009, 10:00 PM	#8
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Re: Be WARNED North Texas... I just went ahead and got a chrome one... it was only 15 fricken dollars... Stupid power steering pump. Previous Owner broke the tensioning bolt off in the pump, and it's wedged in there so bad that after I drilled down into it a bit, and put my extractor thingy in it... it actually broke my extractor thingy. And now I can't drill that back out. Grrrr!!! God I hate previous owners. People must love getting cars after me because I fix so much crap from the people before me. __________________ "The greatest pleasure is to vanquish your enemies and chase them before you, to rob them of their wealth and see those dear to them bathed in tears, to ride their horses and clasp to your bosom their wives and daughters." Ghengis Khan IIOY???

09-26-2009, 10:33 PM	#9
unclewatts 70 Chevrolet=Obsession Join Date: Jun 2009 Location: nice ca Posts: 1,067	Re: Be WARNED North Texas... Hey Todd! I'll be lookin' for ya in my 96 Toyota Corolla! __________________ I'm Just like my truck. Old, Ugly and Grouchy. Except my truck starts easily in the morning and doesn't smoke! IT'S NOT EASY BEING GREEN! -Kermit the frog 1970 Chevrolet C-10 Longbed Stepside : 350, Muncie M20, 3.08 GM corp. positraction Forest green exterior/light green interior(Where all my money goes) 1996 Toyota Corolla (Parts runner)

09-27-2009, 07:47 AM	#10
prairewolf Registered User Join Date: Oct 2005 Location: south dakota Posts: 1,895	Re: Be WARNED North Texas... if I had that under the hood I would leave the hood off for a while. after 2 or 3 months my humbleness would kick in and the hood would go back on looks good. ...kent __________________ eat,work,spend,sleep,repeat.

09-27-2009, 08:21 AM	#13
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Re: Be WARNED North Texas... Man... doesn't it suck when you're putting a motor back into a truck and you're like "What plugged into this...?" I had the distributor cap in hand thinking, "Where is the plug that plugs into this. I see the hot wire, and the tach..." Then it hit me. I don't see the other wires because I haven't stabbed the distributor yet. __________________ "The greatest pleasure is to vanquish your enemies and chase them before you, to rob them of their wealth and see those dear to them bathed in tears, to ride their horses and clasp to your bosom their wives and daughters." Ghengis Khan IIOY???

09-27-2009, 11:17 AM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Be WARNED North Texas... Looking great....... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-27-2009, 02:19 PM	#15
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: Be WARNED North Texas... I have pretty much the exact same setup on my sbc ,and I can't seem to keep my right foot out of it. You'll like it , I wouldn't trade my Trick Flow heads for any other ones. __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

09-27-2009, 02:31 PM	#16
fiddy9apache Registered User Join Date: Aug 2009 Location: ftw tex Posts: 682	Re: Be WARNED North Texas... lets run them... should be pretty stout. looks good.

09-27-2009, 02:53 PM	#17
hayhauler71 Registered User Join Date: Aug 2009 Location: St. Paul MN. Posts: 1,996	Re: Be WARNED North Texas... Looks kinda like mine but i would realy like to know where you got the starter heat shield and what compression are you running? Attached Images Last edited by hayhauler71; 10-08-2009 at 10:40 PM.



Register or Log In To remove these advertisements.

09-27-2009, 06:51 PM	#18
americanmusc1e Senior Member Join Date: Jan 2009 Location: Austin, TX Posts: 1,079	Re: Be WARNED North Texas... I'll run you!!!! when I got my truck Yup, like a whole 90 hp surprisingly, it started my little SBC __________________ -- Josh Instagram: @americanmusc1e OLD SKOOL-- 1970 C10. 454/Th400/3.07 posi Build Thread FARM TRUCK----1949 Chevrolet 3800 Power Wagon Hauler Build Thread 1999 4wd OBS Tahoe - daily. DM me if you can't see photos i posted

09-27-2009, 08:12 PM	#19
americanmusc1e Senior Member Join Date: Jan 2009 Location: Austin, TX Posts: 1,079	Re: Be WARNED North Texas... Sorry, I forgot the original purpose of my post!!! NICE MOTOR!!! you will have fun with it!!!! __________________ -- Josh Instagram: @americanmusc1e OLD SKOOL-- 1970 C10. 454/Th400/3.07 posi Build Thread FARM TRUCK----1949 Chevrolet 3800 Power Wagon Hauler Build Thread 1999 4wd OBS Tahoe - daily. DM me if you can't see photos i posted

09-28-2009, 01:17 AM	#21
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Be WARNED North Texas... What does the truck look like that the engine is going in? Just so I will know who not to mess with! __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

09-28-2009, 12:37 PM	#23
Rreemo Registered User Join Date: Oct 2005 Location: North Texas Posts: 179	Re: Be WARNED North Texas... Hey I'm just over by Texas Motor Speedway, I'll take that challenge! J/K - Good looking powerplant....let's see what it's going into! __________________ 72' LWB Cheyenne 73' Camaro Z28/RS 70' Chevelle RagTop 00=ss=00

09-28-2009, 02:10 PM	#24
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Be WARNED North Texas... Nice Powerplant.....just don't cut in front of me I'll run you over __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

Register or Log In To remove these advertisements.