![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2013
Location: Rhode Island
Posts: 98
|
C10 Goldilocks
So I guess I'll make a build thread for my project I got going on. A little background on me, I come from "import" cars. I've had a few Volkswagens and most recently a Subaru. Very much not to the taste of the boards but I love all makes of cars. A few of them have had air ride and all of them were heavily modified.
![]() Last spring I sold my subaru and all the parts off it to buy a new Silverado for a daily and fun a c10. A 68 C10 had always been my dream truck and I'm old enough to know what I need and to financially support it so I dove in. I bought this truck though a year ago from a guy out mid west, he purchased it a year prior from the original owner in Mississippi so it's in fairly decent shape. It's a 68 anniversary edition, a few original pieces missing like the radio and ivory bench but it was all unmolested. 250 inline 6 with a 3 on the tree. Here it is the day it rolled off the trailer. ![]() It was running and driving but honestly, a mess. The balljoints were shot, the tierods were a disaster, the steering had 3 feet of play in it, tires were dry rotted, the motor wasn't grounded and the wiring was just a mess. First thing I did was go through some safety stuff. 4.5/6 ECE drop, 5 lug swap, disk brakes up front, rebuilt the drums, redid some brake lines, added a power booster, new upper and lower ball joints, inner and outer tie rods, redid the wiring with a Painless ki and some new wheels and tires. I drove it like this for all of 2016. It was such a fun truck but very limiting. it couldn't drive on the highway, I was constantly going through fuel filters, the carb needed to be rebuilt/cleaned (needed a shot of starter fluid for cold starts), enough small things like that. Here are some photos from through out the year. ![]() ![]() ![]() ![]() My girl and I. ![]() Last edited by Phill0406; 02-13-2017 at 01:25 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2013
Location: Rhode Island
Posts: 98
|
Re: C10 Goldilocks
I always knew what my game plan was for this truck. So last September I ordered all my porterbuilt goodies and to accompany, an LQ4 with 100k on it backed by a remanned 4L80e and a custom harness. This was my invision.
![]() I bought a bunch of other stuff along with the suspension and motor like wheels, tires, a Boyd fuel tank, PB firewall fillers and gas assisted hood struts XS Power headers, but I won't bore you guys with photos of just random parts. The last couple weeks I've been working stripping the truck down and getting it all ready. ![]() And this last photo is from yesterday. I have the front assembled minus a few things. I still need to mount the upper shock mounts and notch for the steering but so far so good. ![]() I'll update more in-depth as I go along, I just wanted to get it all up to speed. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2010
Location: Louisville KY
Posts: 620
|
Re: C10 Goldilocks
great looking truck to start with.
__________________
Bruce 1964 C10 SWB #Junk 1979 C10 utility #cargopants (sold) 1971 GMC Sprint (sold) 1974 GMC Grande Sierra (sold) |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2013
Location: Rhode Island
Posts: 98
|
Re: C10 Goldilocks
Overall it's pretty solid. The cab corners need some touching up and the corners of the floor where they meet need repair. The firewall is the worst part, it needs to be cut out and replaced 100%. Will get to that this winter/spring as well.
The bed, front end and frame are absolutely great though. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2013
Location: Farmington NM
Posts: 655
|
Re: C10 Goldilocks
Love where you're headed with it. Super cool truck!
__________________
Former Build (68 c10 swb): http://67-72chevytrucks.com/vboard/s...d.php?t=724379 (SOLD) Current Built (68 c10 swb): http://67-72chevytrucks.com/vboard/s...d.php?t=787712 |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2016
Location: Visalia California
Posts: 891
|
Re: C10 Goldilocks
Awesome start. Should run good with lq4
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Dec 2012
Location: Rochester, IL
Posts: 537
|
Re: C10 Goldilocks
That's a nice list of parts..it will be cool to follow along
__________________
__________________ Mike 70 Med Olive build http://67-72chevytrucks.com/vboard/s...d.php?t=714804 Instagram- protouring66 |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Nov 2013
Location: Rhode Island
Posts: 98
|
Re: C10 Goldilocks
Thanks guys, I'm hoping to have it driveable by May sometime. It won't be complete or 100% but my goal is to have it a driving project, not something that collects dust for 6 years and finally sees light.
Thanks! The truck actually came from near you somewhat. Jonesboro, IL. |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Dec 2012
Location: Rochester, IL
Posts: 537
|
Re: C10 Goldilocks
Good find!! usually everything from these parts is rusted to the ground
![]()
__________________
__________________ Mike 70 Med Olive build http://67-72chevytrucks.com/vboard/s...d.php?t=714804 Instagram- protouring66 |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Nov 2011
Location: enfield ct
Posts: 67
|
Re: C10 Goldilocks
*****in truck!! Love that color
![]() ![]() |
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 4,220
|
Re: C10 Goldilocks
Awesome! ! Truck and great direction
![]()
__________________
Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant |
![]() |
![]() |
![]() |
#12 |
*************
![]() Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,846
|
Re: C10 Goldilocks
Nice truck!
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Mar 2015
Location: Washington State
Posts: 1,644
|
Re: C10 Goldilocks
awesome start!!!!
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,332
|
Re: C10 Goldilocks
Since you are new to the world 'O Chevy pickups.
I assume you know your pickup is gold because the color is the Golden Anniversary color..Nothing special other than that. I think it's just a color that Chevrolet added that year because of the anniversary. (Anyone else have a better explanation???) I've read here that the gold pickups that year came with whatever options just like any other pickup I'm amazed that your paint is in such good condition. If you paint it, I hope you retain that color. There's a thread here a guy is completely making over a 69, with a 68 front clip, painted it gold to imitate the anniversary special. He used a slight different gold color, but it looks awesome. There's been no responses on that thread for a while, I hope all is well with those folks! I bought my 68 Golden in 1980, the paint on it THEN, was nowhere as nice as yours is now. Have fun! |
![]() |
![]() |
![]() |
#15 | |
Registered User
Join Date: Nov 2013
Location: Rhode Island
Posts: 98
|
Re: C10 Goldilocks
Quote:
I found a little diecast "hot wheels" anniversary c10 that I hung by my computer. I wish I knew more about the 50th anniversary but it seems there isn't a big trail for what it is and why. While I'm posting I'll add another photo or two I suppose. A week or so ago when I had the frame on a little dolly I whipped together for a couple bucks. ![]() ![]() ![]() ![]() Excuse the few missing bolts, I'm missing a bag from Porterbuilt and need to contact them for it. Also I didn't have a reamer to drill out the holes ontop of the frame so those aren't in yet. Getting to the garage Saturday night to chip away more. Last edited by Phill0406; 02-14-2017 at 11:15 AM. |
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
|
Re: C10 Goldilocks
sweet build! nice truck to start with.
__________________
my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682 |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Nov 2013
Location: Rhode Island
Posts: 98
|
Re: C10 Goldilocks
|
![]() |
![]() |
![]() |
#18 |
Registered User
![]() Join Date: Mar 2013
Location: Syracuse, Utah
Posts: 499
|
Re: C10 Goldilocks
Dig the truck and story. I'm in for the ride.
__________________
Justin '67 C20 CST Custom Camper '04.5 LLY Duramax CCSB...sold |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jul 2012
Location: Rosenberg, Texas
Posts: 3,506
|
Re: C10 Goldilocks
Nice start! I'm in for the ride.
__________________
-Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby) |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Nov 2013
Location: Rhode Island
Posts: 98
|
Re: C10 Goldilocks
Got some more work done on Saturday night fitting the notches in the rear. Boy these things were a PITA to get in. A lot of grinding, cutting, hammering, drilling and fitting to get them in correct. I'd rather have them fit extra snug than extra loose though, this is a structure part so I really appreciate Porterbuilt making the fitment threshold to finite. I haven't cut the excess out yet because both batteries died drilling out the holes and I want to have all the bolts in before I make my first cut.
Motor comes in today or tomorrow, need to call the delivery company to figure that out. Won't be doing much if anything to the motor before I put it in because I want to ensure it's running correctly before I start throwing a bunch of speed parts at it. I will be changing out the oil pan and pickup tube though to allow it to lay out. More on that later. Those of you without lifts, how are you moving the cab around? Even without the doors on this thing is effin HEAVY! I tried putting two 1" steel tubes though the door ways and have four guys, one on each corner, grab their end of the pole and lift it but it was far to sketchy to walk anywehere I saw one guy put a 4x4 on an engine hoist to make a "cab hoist". Anyone try that before? No cracking of the wood? ![]() ![]() ![]() ![]() Front end didn't get the final touches I want to do to it due to how much time fitting the notches took but there's always another day. More later this week. ![]() |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Oct 2012
Location: mountain home, AR
Posts: 794
|
Re: C10 Goldilocks
I pull my cab on and off by myself with a hoist. Not the safest but if you take your time and are cautious it's not bad. I built mine out of 2x8s bridging the cab with stops on both ends so the cab can't slide off. Basically built like floor joists in a house but with a pivet bolt running through the cherry picker. I wouldn't trust just a 4x4.
__________________
Project Double Tap http://67-72chevytrucks.com/vboard/s...d.php?t=555901 69 Olive Verde http://67-72chevytrucks.com/vboard/s...d.php?t=734720 |
![]() |
![]() |
![]() |
#22 | |
Registered User
Join Date: Nov 2013
Location: Rhode Island
Posts: 98
|
Re: C10 Goldilocks
Quote:
|
|
![]() |
![]() |
![]() |
#23 |
Registered User
![]() Join Date: Dec 2012
Location: Rochester, IL
Posts: 537
|
Re: C10 Goldilocks
http://www.autobodytoolmart.com/cham...3-p-11546.aspx
I know of few guys who have used this and were happy with it. I have a lift but I just ordered one of these as well. It will also work on the bed.
__________________
__________________ Mike 70 Med Olive build http://67-72chevytrucks.com/vboard/s...d.php?t=714804 Instagram- protouring66 |
![]() |
![]() |
![]() |
#24 | |
Registered User
Join Date: Nov 2013
Location: Rhode Island
Posts: 98
|
Re: C10 Goldilocks
Quote:
I also had a question for you actually... I loved your bushing idea on the gas tank. I know you said you used Energy bushings, do you have a part number for them or a link? |
|
![]() |
![]() |
![]() |
#25 |
Registered User
![]() Join Date: Dec 2012
Location: Rochester, IL
Posts: 537
|
Re: C10 Goldilocks
__________________
__________________ Mike 70 Med Olive build http://67-72chevytrucks.com/vboard/s...d.php?t=714804 Instagram- protouring66 |
![]() |
![]() |
![]() |
Bookmarks |
|
|