parting a 68 chevy now - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 08-17-2009, 05:08 PM

Going to try to start pulling parts this week on this one. Ask questions in thread. Pay pal (no extra fees charged to you for using pay pal) or money order
Grill is pretty good, one small dent see pic $80 plus shipping
radiator support is good $75 NO SHIPPING
powerglide shifter linkage $25 plus shipping
Automatic crossmember $50 shipped
V8 motor stands $31 shipped
gauge setup $35 shipped
trailing arms are good $100 for pair
see anything else you need ask and I'll price in thread, I'll be parting it out completely then scraping the rest. I'll post pics of other parts once I get them off
Thanks Randy

teeitup · 08-17-2009, 05:12 PM

mooooo

teeitup · 08-17-2009, 05:13 PM

mnmnm

teeitup · 08-17-2009, 05:15 PM

It has a decent bed floor and a decent tailgate for a driver

teeitup · 08-17-2009, 05:17 PM

Mike, sorry no emblem, it had a choke cable I thought was sold but he didn't buy it, so its for sale. Thanks Randy

**lolife99** · 08-17-2009, 05:34 PM

Randy,... how nice is the passenger side fender?

msgross · 08-17-2009, 05:13 PM

choke delete emblem?

otsenre · 08-17-2009, 05:49 PM

accelerator linkage

70rs/ss · 08-17-2009, 05:51 PM

How's about a long one piece driveshaft off one of the vehicles you have? I will use it in a 2wd Blazer so I'll need to get it cut down but want a long enough one to start with? PM me?

**71blksuper4x4** · 08-17-2009, 06:04 PM

Randy, can you do me a favor on the dash bezel. I am wanting to paint a dash bezel with a correct shade of silver for the edges but I don't have any spare 67-8 dash bezels to get the correct shade, can you wipe off a clean area and snap a shot for me? Thanks Trevor

timzrides · 08-17-2009, 06:15 PM

what about the automatic shifter piece in picture 4 that i inquired a few weeks back?? thanks

HOTFUN · 08-17-2009, 06:29 PM

Hi Randy, Is the hood bent, rusted through, or bowed anywhere? Thanks, Mark

**wancosc356** · 08-17-2009, 07:11 PM

I believe you are dealing with a 67 there. Well the inside looks to be 67 and the outside with the side markers look 68. Anyways, Im interested in the grill and rad. support. Pm sent.

egressin · 08-17-2009, 07:22 PM

does the radio work?

teeitup · 08-17-2009, 07:37 PM

lolife99, Keith, sorry, its bad rust in lower front bottom amd front edge around headlight has bondo in it
otsenre, Ernest, no linkage just the pedal, sorry
70rs/ss, Mike, this one doesn't have one, I've got some more trucks bought but not sure when I'll be getting them
71blksuper, Trevor, I'll get a pic after work Tues
Timsrides, Tim, I'm wanting to keep all this linkage together, sorry
hotfun, Mark, I'll check it out, no bow in it, I'll look at it better
wancosc356, sorry its a 68, large ignition bezel and also vin states 68. 67 and 68 insides are basically the same with a few small exceptions. Sorry I'll ship the grill but not the rad support, too big. Also sorry I don't use Greyhound
egressin, its not factory and I'm unsure if its working condition
Thanks Randy

**wancosc356** · 08-17-2009, 07:39 PM

Oh ok. Well, how much for just the grill shipped to 87107? And how does the backside of it look? Thanks
Michael

**CPNE** · 08-17-2009, 08:20 PM

Door panels Price and pics of backside?

**BIG ORANGE** · 08-17-2009, 09:45 PM

Randy I got a ole timmer that is needing a manual steering box! shut me a price w shipping! 29720
He also needs a good 6cly. fuel sending unit too....... (1968 truck)
thanks bud

**special-K** · 08-17-2009, 09:52 PM

Are the door locks and ignition switch in good shape?I need that combo.LMK

shootiniron · 08-17-2009, 10:01 PM

How much for the tailgate?

jlive68 · 08-17-2009, 10:08 PM

Put me in line for the hood if it is in good shape if HOTFUN passes.

**special-K** · 08-17-2009, 11:00 PM

Is that a`68 Highlander?

72BlckButy · 08-18-2009, 08:20 AM

Randy how good are the green plastic pieces (not sure what they are called) behind the window/door cranks?

**Hart_Rod** · 08-18-2009, 08:34 AM

How much for the radio knobs?

brian mac · 08-18-2009, 09:59 AM

how much for the panhard bar bracket on the driver side frame rail shipped to 36027?

08-17-2009, 05:08 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	parting a 68 chevy now Going to try to start pulling parts this week on this one. Ask questions in thread. Pay pal (no extra fees charged to you for using pay pal) or money order Grill is pretty good, one small dent see pic $80 plus shipping radiator support is good $75 NO SHIPPING powerglide shifter linkage $25 plus shipping Automatic crossmember $50 shipped V8 motor stands $31 shipped gauge setup $35 shipped trailing arms are good $100 for pair see anything else you need ask and I'll price in thread, I'll be parting it out completely then scraping the rest. I'll post pics of other parts once I get them off Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-17-2009, 05:12 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now mooooo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-17-2009, 05:13 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now mnmnm Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-17-2009, 05:15 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now It has a decent bed floor and a decent tailgate for a driver Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-17-2009 at 05:15 PM.

08-17-2009, 05:17 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now Mike, sorry no emblem, it had a choke cable I thought was sold but he didn't buy it, so its for sale. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-17-2009, 05:34 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: parting a 68 chevy now Randy,... how nice is the passenger side fender? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-17-2009, 05:13 PM	#7
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: parting a 68 chevy now choke delete emblem? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-17-2009, 05:49 PM	#8
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: parting a 68 chevy now accelerator linkage

08-17-2009, 05:51 PM	#9
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: parting a 68 chevy now How's about a long one piece driveshaft off one of the vehicles you have? I will use it in a 2wd Blazer so I'll need to get it cut down but want a long enough one to start with? PM me?

08-17-2009, 06:04 PM	#10
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: parting a 68 chevy now Randy, can you do me a favor on the dash bezel. I am wanting to paint a dash bezel with a correct shade of silver for the edges but I don't have any spare 67-8 dash bezels to get the correct shade, can you wipe off a clean area and snap a shot for me? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-17-2009, 06:15 PM	#11
timzrides Registered User Join Date: Jan 2007 Location: Illinois Posts: 351	Re: parting a 68 chevy now what about the automatic shifter piece in picture 4 that i inquired a few weeks back?? thanks

08-17-2009, 06:29 PM	#12
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: parting a 68 chevy now Hi Randy, Is the hood bent, rusted through, or bowed anywhere? Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-17-2009, 07:11 PM	#13
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: parting a 68 chevy now I believe you are dealing with a 67 there. Well the inside looks to be 67 and the outside with the side markers look 68. Anyways, Im interested in the grill and rad. support. Pm sent. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

08-17-2009, 07:22 PM	#14
egressin Registered User Join Date: Apr 2009 Location: abilene tx Posts: 9	Re: parting a 68 chevy now does the radio work?

08-17-2009, 07:37 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now lolife99, Keith, sorry, its bad rust in lower front bottom amd front edge around headlight has bondo in it otsenre, Ernest, no linkage just the pedal, sorry 70rs/ss, Mike, this one doesn't have one, I've got some more trucks bought but not sure when I'll be getting them 71blksuper, Trevor, I'll get a pic after work Tues Timsrides, Tim, I'm wanting to keep all this linkage together, sorry hotfun, Mark, I'll check it out, no bow in it, I'll look at it better wancosc356, sorry its a 68, large ignition bezel and also vin states 68. 67 and 68 insides are basically the same with a few small exceptions. Sorry I'll ship the grill but not the rad support, too big. Also sorry I don't use Greyhound egressin, its not factory and I'm unsure if its working condition Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

08-17-2009, 07:39 PM	#16
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: parting a 68 chevy now Oh ok. Well, how much for just the grill shipped to 87107? And how does the backside of it look? Thanks Michael __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 08-17-2009 at 07:40 PM.

08-17-2009, 08:20 PM	#17
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: parting a 68 chevy now Door panels Price and pics of backside? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

08-17-2009, 09:45 PM	#18
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	Re: parting a 68 chevy now Randy I got a ole timmer that is needing a manual steering box! shut me a price w shipping! 29720 He also needs a good 6cly. fuel sending unit too....... (1968 truck) thanks bud __________________ Things happen for a reason!

08-17-2009, 09:52 PM	#19
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: parting a 68 chevy now Are the door locks and ignition switch in good shape?I need that combo.LMK __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-17-2009, 10:01 PM	#20
shootiniron Registered User Join Date: Aug 2009 Location: Prescott,AZ Posts: 24	Re: parting a 68 chevy now How much for the tailgate?

08-17-2009, 10:08 PM	#21
jlive68 Senior Member Join Date: Apr 2004 Location: Greenville, Tx. Posts: 286	Re: parting a 68 chevy now Put me in line for the hood if it is in good shape if HOTFUN passes. __________________ 1968 chevy U.S. Navy

08-17-2009, 11:00 PM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: parting a 68 chevy now Is that a`68 Highlander? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-18-2009, 08:20 AM	#23
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: parting a 68 chevy now Randy how good are the green plastic pieces (not sure what they are called) behind the window/door cranks? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-18-2009, 08:34 AM	#24
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: parting a 68 chevy now How much for the radio knobs? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-18-2009, 09:59 AM	#25
brian mac Registered User Join Date: Dec 2008 Location: eufaula,alabama Posts: 198	Re: parting a 68 chevy now how much for the panhard bar bracket on the driver side frame rail shipped to 36027?

Register or Log In To remove these advertisements.