Greetings to everyone! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7d14xfun · 08-06-2003, 06:54 PM

Just wanna say that I've been going to this site for over a month. There's too much great info on here! Down below should be a pic of my '71 K10 stepside. Did a frame up resto over the course of a few years. Bought it in 1993, and the day I went to pull it in the garage to restore it, the engine gave up! Everything on here was either new or, I used the best pieces I could find to make this truck alive again.

The basic rundown:

Original 1971 350 c.i. bored 30 over, Edelbrock intake, Rochester Q-Jet, K&N Filter, Competition 260H cam, roller rockers and lifters. Nothing TOO crazy, just right for me.

Turbo 350 rebuilt (has the smooth 'like butter' shifts)

NP205 rebuilt

Rebuilt 12 bolt w/ 3.08 Auburn unit

Rebuilt Dana 44 front w/3.07 & Warn hubs

31x10.5x15 BFG Long Trails on 15x8 Eagle Rims

Paint is Flame Red

Lucked out BIG time. These are the original rear steps and fenders. Just needed minor work.

Does anyone else own or have pics of a '71 4x4 Stepside? All I've seen are older ones. A chevy #'s book I got says that only 1438 of the 1971 4x4 short stepside were made. Anyone know if this is right?

Also, I've got a BUNCH of parts I've collected over the years, and it's time for them to go. Don't have any pics to show you, but I'm getting a digital camera maybe next week. I have some things, but not everything. E-mail me with what you are looking for. Some parts are new in the box. Be patient with me if I don't get back to you soon, I'll try my best.

Thanx everyone, and keep truckin'!

72c10step · 08-06-2003, 07:02 PM

Welcome from NH! That's a very nice truck you have there. I know what you mean about the steps and fenders. My old 71 (used to be the project truck before I got my 72) had an older 60-66 style bed on it. I was dreading tracking down a set of correct fenders and paying out the @$$ for them, but then found a great deal for a 72 that I couldn't pass up. $3000 for what you see below. It also has original fenders and steps with a little work done to them.

72c10step · 08-06-2003, 07:05 PM

Oops, forgot the pic.

**FRENCHBLUE72** · 08-06-2003, 08:16 PM

Nice truck welcome to the board from southern oregon...

chevy_fatman · 08-06-2003, 08:46 PM

Welcome from PA! Gotta love those stepsides

**Palf70Step** · 08-06-2003, 08:48 PM

Welcome to the board from Southern Mississippi. NICE Truck!! You got some funny looking white stuff around it though!!

**old Rusty C10** · 08-06-2003, 08:50 PM

gorgeous truck!!!! welcome from nj neighbor! trucks like that make me want to fix mine up !!

Gordo · 08-06-2003, 09:01 PM

Red, short step, perfect! Welcome from Killingworth, CT

6772king · 08-06-2003, 09:35 PM

looks good did a real nice job! hope to see more pics!

toms68cst · 08-06-2003, 09:43 PM

That's a fine looking machine! Welcome aboard.

krue · 08-06-2003, 10:00 PM

Great looking truck. Welcome again from South Mississippi!

Quote:

You got some funny looking white stuff around it though!!

Bill, I think that is sand. He must live on the beach!

DR67 · 08-06-2003, 10:03 PM

Nice looking truck, love those short steps. Welcome from Tn.

DR67

lunatic · 08-06-2003, 10:05 PM

Very Nice looking truck,Welcome from BC

**Stocker** · 08-06-2003, 10:17 PM

Great lookin' truck! Welcome from Northern Northern California!

7d14xfun · 08-06-2003, 11:06 PM

Feels good to be connected to fellow Chevy truck owners. Thanx for the welcome. I have to scan and send some more older pics I got. Hoping to get a digital camera next week.

What's the deal with people buying parts on this board from other members? ANY info on who to use for shipping (UPS, Fed- ex), dealing with money orders, etc, etc, let me know what goes on for the transaction. I'm not looking to give people the runaround, just want to handle things correctly. Give me time before you can see pics of parts.

I got a LONG (4 written pages) list of parts that I'll probably list tomorrow, but just going to write a few now. Go to my profile and e-mail me if you see something you'd like, or if you need any items you need but aren't listed, e-mail me, but be patient for pics. I have no tach dashes, tilt columns, fenders, doors, tailgates, or cabs.

A small taste:

Instrument cluster out of a 1967-1972 C-50 with Vacuum gauge, but no tach. Complete, but faded, and no cracks in plastic.

Modine Heavy Duty radiator new in box part #2527 with tranny cooler. Looks like a 4 core. GM style, has curved lower outlet on pass. side and top outlet on drivers.

Sunvisors: 1 blue (sort of metallic in color) set, and 2 green sets. Very good condition.

Not sure what I'm gonna charge for prices yet. I'm selling these parts 'cause I need the space. Gotta get some shipping cost info tomorrow.

Thanks.

7d14xfun · 08-06-2003, 11:08 PM

front shot.

dion · 08-06-2003, 11:10 PM

very nice! steps rock. welcome from CA

barn9 · 08-07-2003, 02:44 AM

Cool truck you have there, looks like you did a fine job on it, looking forward to seeing more of it. And welcome to the board from Kansas!

Mudder · 08-07-2003, 03:10 AM

Sweet! Gotta love those red short stepsides!!!!!!!!!!!!!!

krue · 08-07-2003, 04:23 AM

Try posting your parts list on the parts board for the best response!

**Yukon Jack** · 08-07-2003, 10:11 AM

Welcome and what a great looking stepside! I'll PM you about a part question.

landon4421 · 08-07-2003, 11:31 AM

welcome from california.

good looking truck also.

griesel72 · 08-07-2003, 11:41 AM

Sharp truck, wish it was mine

You will learn all kinds of good things here

jewels. · 08-07-2003, 11:43 AM

i agree with mudder! gotta love those red short steps! welcome from indiana!

as for parts --- most ppl list the parts they are selling on the 67-72 Parts Board (see link at top of page). here, you can get an idea of how ppl go about listing the parts, the prices they charge for them, and the shipping charges. hope this helps!

welcome to the best board ever! (for 67-72 trucks)

jewels.

Warbones · 08-07-2003, 12:11 PM

That's a nice truck. Wish I was a fly and could go for a ride in that one.

08-06-2003, 06:54 PM	#1
7d14xfun Registered User Join Date: Aug 2003 Location: CT Posts: 93	Greetings to everyone! Just wanna say that I've been going to this site for over a month. There's too much great info on here! Down below should be a pic of my '71 K10 stepside. Did a frame up resto over the course of a few years. Bought it in 1993, and the day I went to pull it in the garage to restore it, the engine gave up! Everything on here was either new or, I used the best pieces I could find to make this truck alive again. The basic rundown: Original 1971 350 c.i. bored 30 over, Edelbrock intake, Rochester Q-Jet, K&N Filter, Competition 260H cam, roller rockers and lifters. Nothing TOO crazy, just right for me. Turbo 350 rebuilt (has the smooth 'like butter' shifts) NP205 rebuilt Rebuilt 12 bolt w/ 3.08 Auburn unit Rebuilt Dana 44 front w/3.07 & Warn hubs 31x10.5x15 BFG Long Trails on 15x8 Eagle Rims Paint is Flame Red Lucked out BIG time. These are the original rear steps and fenders. Just needed minor work. Does anyone else own or have pics of a '71 4x4 Stepside? All I've seen are older ones. A chevy #'s book I got says that only 1438 of the 1971 4x4 short stepside were made. Anyone know if this is right? Also, I've got a BUNCH of parts I've collected over the years, and it's time for them to go. Don't have any pics to show you, but I'm getting a digital camera maybe next week. I have some things, but not everything. E-mail me with what you are looking for. Some parts are new in the box. Be patient with me if I don't get back to you soon, I'll try my best. Thanx everyone, and keep truckin'! Attached Images __________________ 1971 Chevy K10 Stepside 1999 Chevy Silverado 4x4

08-06-2003, 07:05 PM	#3
72c10step WHYBYNU when old will do? Join Date: Jul 2003 Location: Loudon, NH Posts: 876	Oops, forgot the pic. Attached Images __________________ -72 Chevy C10 Stepside -2002 Chevy Silverado 2500HD 4x4 -1984 Jeep CJ7 -1995 Polaris XCR600 Custom -2003 Honda 300ex

08-06-2003, 08:16 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Nice truck welcome to the board from southern oregon... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-06-2003, 08:46 PM	#5
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Welcome from PA! Gotta love those stepsides __________________ Paul How do you make the invisible, visible?.........You take it away.

08-06-2003, 08:48 PM	#6
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,037	Welcome to the board from Southern Mississippi. NICE Truck!! You got some funny looking white stuff around it though!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

08-06-2003, 07:02 PM	#2
72c10step WHYBYNU when old will do? Join Date: Jul 2003 Location: Loudon, NH Posts: 876	Welcome from NH! That's a very nice truck you have there. I know what you mean about the steps and fenders. My old 71 (used to be the project truck before I got my 72) had an older 60-66 style bed on it. I was dreading tracking down a set of correct fenders and paying out the @$$ for them, but then found a great deal for a 72 that I couldn't pass up. $3000 for what you see below. It also has original fenders and steps with a little work done to them. __________________ -72 Chevy C10 Stepside -2002 Chevy Silverado 2500HD 4x4 -1984 Jeep CJ7 -1995 Polaris XCR600 Custom -2003 Honda 300ex

08-06-2003, 08:50 PM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,300	gorgeous truck!!!! welcome from nj neighbor! trucks like that make me want to fix mine up !! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-06-2003, 09:01 PM	#8
Gordo Registered User Join Date: Jan 2001 Location: Killingworth, CT. USA Posts: 3,378	Red, short step, perfect! Welcome from Killingworth, CT __________________ 1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist.

08-06-2003, 09:35 PM	#9
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	looks good did a real nice job! hope to see more pics! __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

08-06-2003, 09:43 PM	#10
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,286	That's a fine looking machine! Welcome aboard. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

08-06-2003, 10:03 PM	#12
DR67 Registered User Join Date: Feb 2002 Location: Knoxville, Tn. USA Posts: 205	Nice looking truck, love those short steps. Welcome from Tn. DR67 __________________ Dave Knoxville,Tn.

08-06-2003, 10:05 PM	#13
lunatic Registered User Join Date: Jan 2003 Location: BC Posts: 929	Very Nice looking truck,Welcome from BC

08-06-2003, 10:17 PM	#14
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,682	Great lookin' truck! Welcome from Northern Northern California! __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

08-06-2003, 11:06 PM	#15
7d14xfun Registered User Join Date: Aug 2003 Location: CT Posts: 93	More pics Feels good to be connected to fellow Chevy truck owners. Thanx for the welcome. I have to scan and send some more older pics I got. Hoping to get a digital camera next week. What's the deal with people buying parts on this board from other members? ANY info on who to use for shipping (UPS, Fed- ex), dealing with money orders, etc, etc, let me know what goes on for the transaction. I'm not looking to give people the runaround, just want to handle things correctly. Give me time before you can see pics of parts. I got a LONG (4 written pages) list of parts that I'll probably list tomorrow, but just going to write a few now. Go to my profile and e-mail me if you see something you'd like, or if you need any items you need but aren't listed, e-mail me, but be patient for pics. I have no tach dashes, tilt columns, fenders, doors, tailgates, or cabs. A small taste: Instrument cluster out of a 1967-1972 C-50 with Vacuum gauge, but no tach. Complete, but faded, and no cracks in plastic. Modine Heavy Duty radiator new in box part #2527 with tranny cooler. Looks like a 4 core. GM style, has curved lower outlet on pass. side and top outlet on drivers. Sunvisors: 1 blue (sort of metallic in color) set, and 2 green sets. Very good condition. Not sure what I'm gonna charge for prices yet. I'm selling these parts 'cause I need the space. Gotta get some shipping cost info tomorrow. Thanks. Attached Images __________________ 1971 Chevy K10 Stepside 1999 Chevy Silverado 4x4

08-06-2003, 11:08 PM	#16
7d14xfun Registered User Join Date: Aug 2003 Location: CT Posts: 93	one more pic front shot. Attached Images __________________ 1971 Chevy K10 Stepside 1999 Chevy Silverado 4x4



Register or Log In To remove these advertisements.

08-06-2003, 11:10 PM	#17
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	very nice! steps rock. welcome from CA __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

08-07-2003, 02:44 AM	#18
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Cool truck you have there, looks like you did a fine job on it, looking forward to seeing more of it. And welcome to the board from Kansas! __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

08-07-2003, 03:10 AM	#19
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Sweet! Gotta love those red short stepsides!!!!!!!!!!!!!!

08-07-2003, 04:23 AM	#20
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Try posting your parts list on the parts board for the best response! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

08-07-2003, 10:11 AM	#21
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Welcome and what a great looking stepside! I'll PM you about a part question. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-07-2003, 11:31 AM	#22
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	welcome from california. good looking truck also. __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

08-07-2003, 11:41 AM	#23
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Sharp truck, wish it was mine You will learn all kinds of good things here __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

08-07-2003, 11:43 AM	#24
jewels. Registered User Join Date: Jul 2001 Location: Munster, IN Posts: 1,100	i agree with mudder! gotta love those red short steps! welcome from indiana! as for parts --- most ppl list the parts they are selling on the 67-72 Parts Board (see link at top of page). here, you can get an idea of how ppl go about listing the parts, the prices they charge for them, and the shipping charges. hope this helps! welcome to the best board ever! (for 67-72 trucks) jewels. __________________ 68 C10 Red Step 350 my first child & main focus 58 3200 Apache LWB Step the upcoming project

08-07-2003, 12:11 PM	#25
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	That's a nice truck. Wish I was a fly and could go for a ride in that one. __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

Register or Log In To remove these advertisements.