The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-28-2013, 08:33 PM   #1
Longhorn 70
Registered User
 
Longhorn 70's Avatar
 
Join Date: Dec 2012
Location: Chandler AZ
Posts: 1,149
Post Prestone vs Peak vs Dexcool???

This may have been discussed before but I didn't find it in the searches I did.

Coolant/Antifreeze. I am amazed at the prices of Antifreeze these days. It used to be 2x as expensive as gas and now it's over 4 times as expensive. I'll turn the whining off now.

Who is the best bang for buck, best performing for corrosion prevention in aluminum and best all around?

I have read bad things about Dexcool. I will be putting this stuff in 4 different cars. My truck, of course, the Vette, Toyota and Nissan. Is there one type that works in all 4 and won't kill aluminum radiators, intakes and heads?

Thanks in advance guys.
__________________
1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11.
1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar

And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9
Longhorn 70 is offline   Reply With Quote
Old 12-28-2013, 08:40 PM   #2
whitels1
Registered User
 
whitels1's Avatar
 
Join Date: Apr 2012
Location: Vegas
Posts: 617
Re: Prestone vs Peak vs Dexcool???

I use dexcool in all of my aluminium applications.
__________________

GoldyLS1 K20 Build


My K10 Rock Crawler

-Dave
whitels1 is offline   Reply With Quote
Old 12-28-2013, 08:48 PM   #3
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,657
Re: Prestone vs Peak vs Dexcool???

-
Being the cheapskate I am I buy whatever is on sale that will work in all of my vehicles...

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 12-28-2013, 10:30 PM   #4
Daner
Registered User
 
Daner's Avatar
 
Join Date: Sep 2011
Location: Wildrose, North Dakota
Posts: 300
Re: Prestone vs Peak vs Dexcool???

I've heard Evans waterless coolant is best for aluminum. Lasts forever and won't corrode. It's pricey so I've never used it. Been debating with myself whether or not to put it in my snowmobile.
__________________
Dane
67 Chevy Fleet 250/4 speed 1/2 ton
68 Chevy 250/4 speed 1/2 ton for parts
49 GMC Grain truck 235 1 1/2 ton
76 Chevy 350/4 speed 1/2 ton
Daner is offline   Reply With Quote
Old 12-28-2013, 10:31 PM   #5
Longhorn 70
Registered User
 
Longhorn 70's Avatar
 
Join Date: Dec 2012
Location: Chandler AZ
Posts: 1,149
Re: Prestone vs Peak vs Dexcool???

I typically do too Leon. I am trying to avoid replacing parts/antifreeze in the future. The RDRR in the Vette was $600.... That one hurt.

I look at the bright side as far as coolant is concerned. I don't have an original 351 V6. Those things have a HUGE capacity. I am still a cheapskate though.
__________________
1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11.
1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar

And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9
Longhorn 70 is offline   Reply With Quote
Old 12-28-2013, 10:35 PM   #6
Hawghauler
Registered User
 
Hawghauler's Avatar
 
Join Date: Nov 2012
Location: Whidbey Island/Edmonds,WA
Posts: 360
Re: Prestone vs Peak vs Dexcool???

I work with newer fleet vehicles, and they come with dexcool new. I immediately replace it with Prestone Green antifreeze. We were finding the radiators filling up with what looked like sand. After changing to the tried and true Prestone green, no more problems. I've used Prestone since highschool, and I've never had any problems. On the other hand, I've worked for some pretty bad penny pinchers, and they insist on saving a few bucks on the cheap stuff. One case was a F**d 300 six. After rebuilding the motor one year, he insisted on cheap antifreeze. Within a year, we had to weld plates onto the side of the block to keep the coolant inside as it had rusted through the water jacket to the point where you could stick your finger through the block. At $45 a stick for cast iron welding rod, he lost his savings on the antifreeze. Notice we didn't replace the engine! Cheap! In all the expenses for any vehicle, saving pennies on seemingly unimportant things like antifreeze, just doesn't make sense. I highly recommend Prestone. But don't buy the 50/50, why pay for water. Get the concentrate. And make sure it's green.
__________________
If I have to be on 4 wheels, It has to be a classic Chevy

1967 c10 Longbed (Hawghauler/Icy weather transport)
2003 BMW K1200GT (Rain bike)
2007 Softail Deuce (Sun bike)
2009 Ultra Classic Electra Glide (Everything else bike)
Hawghauler is offline   Reply With Quote
Old 12-28-2013, 10:40 PM   #7
WIDESIDE72
Senior Member
 
WIDESIDE72's Avatar
 
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,500
Re: Prestone vs Peak vs Dexcool???

The old school green coolant is t listed as being compatible in the newer engines. This may just be hokum but i am not going to be a guinea pig with a $5k engine. As far as concentrate bs 50/50, its fine to buy concentrate, just dont use tap water. Used distilled water. You are introducing too many impurities into the system. Especiall important in aluminum component engines. My understanding is the pre mixed uses distilled water.
WIDESIDE72 is offline   Reply With Quote
Old 12-28-2013, 11:43 PM   #8
BigRed76
Registered User
 
BigRed76's Avatar
 
Join Date: Jan 2010
Location: Loveland, CO
Posts: 1,921
Re: Prestone vs Peak vs Dexcool???

What I've learned about coolant over the years is that it doesn't matter what kind you use if you don't maintain it. Most of the bad stories I've heard about dexcool were from lack of maintenance.

I run dexcool in my '71 with the 5.3, and the '96 k1500, and regular green in the Cutlass. It all works great because I replace it when it needs it. Not sure how new your Toyota and Nissan are, but they might require coolant other than green or dexcool. At my work we typically put coolant in vehicles that they originally came with just to simplify things, but never mix them. For instance, never mix green with dex, or dex with gold, and so on...
__________________
Zach

1970 Chevrolet Custom Camper K20
1971 GMC Super K2500, 12V/NV4500 swap in progress
1971 Chevrolet Custom C10
1972 Chevrolet Custom Deluxe C20, 5.3/4L60E
1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi
2004 GMC Sierra 2500HD, LB7/Allison, CCSB
2005 GMC Sierra 1500, 5.3/4L60E, CCSB

BigRed76 is offline   Reply With Quote
Old 12-29-2013, 07:59 AM   #9
hamjet
Registered User
 
hamjet's Avatar
 
Join Date: Apr 2013
Location: South Westerlo, New York
Posts: 1,325
Re: Prestone vs Peak vs Dexcool???

I think they're all pretty good but if you have to add water make sure you use distilled water, I have a well here and the lime scale would realy play havic in the radiator and engine. I found out the hard way when I was young..
__________________
Thanks, Joe..
1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB.
hamjet is offline   Reply With Quote
Old 12-29-2013, 11:08 AM   #10
70c10-08
Registered User
 
70c10-08's Avatar
 
Join Date: Jul 2009
Location: Fairmont, Nebraska
Posts: 551
Re: Prestone vs Peak vs Dexcool???

I use the prestone green stuff in all the older vehicles but in all the newer GM trucks my family uses I only use dexcool that's what the decal, manual, and GM themselves say to use never had any problems so far and my 98 k1500 z71 Silverado has 197,000 miles on it
70c10-08 is offline   Reply With Quote
Old 12-29-2013, 11:54 PM   #11
67_C-30
I have a radical idea!
 
67_C-30's Avatar
 
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
Re: Prestone vs Peak vs Dexcool???

The Advance Auto Parts store brand is made by Prestone, and is cheaper than the brand name stuff. Their oil is made by Havoline, and I use it it a lot too. I used to work at Advance, and I had a Divison manager tell me what companies made their house brand stuff.
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435
‘72 C-10 SWB , 350 4bbl, TH350
'69 C-10 SWB , 250 L6, 3 OTT
'69 GMC C3500, dump truck, 351 V6, NP435
'84 M1009 CUCV Military Blazer

67 C-30 Turbodiesel build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=254096

My trucks
http://s226.photobucket.com/albums/d...ediafilter=all

Member of the 1-Ton Club!
67_C-30 is offline   Reply With Quote
Old 12-30-2013, 12:43 AM   #12
bpatrol
Registered User
 
Join Date: Aug 2012
Location: tucson,az
Posts: 274
Re: Prestone vs Peak vs Dexcool???

Just run prestone. it works great always had and still does.
Dexcool I wouldn't recommend unless everything is aluminum, and I mean everything, block, intake radiator. It eats anything else.
Too be honest I wouldn't put it in a new car.
also if your heater core isn't aluminum it will foul everything else.
Did I mention dexcool sucks

Don't overthink it and get the green stuff
bpatrol is offline   Reply With Quote
Old 12-30-2013, 01:00 AM   #13
RustyBucket
Registered User
 
RustyBucket's Avatar
 
Join Date: Jul 2009
Location: Space Coast, Fl.
Posts: 1,050
Re: Prestone vs Peak vs Dexcool???

I recently replaced the water pump on my '02 GMC 1500hd crewcab 6.0. I'm ashamed to admit that I'd never flushed the cooling system in 12 years & 160,000 mi. For a few months I'd been adding a little distilled water because the pump was leaking and replaced it when it got noisy. The engine has alum. heads and an iron block. I'd heard & read bad stuff about the DEXCOOL if it's left in too long and was dreading what I was gonna find in my poor ol' truck. The cooling system was amazingly clean inside considering the neglect. I flushed it good and put DEXCOOL back in it.
__________________
Dad always said, "Son, WISH IN ONE HAND, and ......."
--------------------------------------
--------------------------------------
Current toy trucks:
'71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C
'72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt

Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these:
'66 Plymouth Belvedere City of Miami cop car clone.
'70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!!
'67 C10 short/step side mount spare -- SOLD!!
'72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!!
'69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!
RustyBucket is offline   Reply With Quote
Old 12-30-2013, 01:07 AM   #14
Troy Sr
Registered User
 
Troy Sr's Avatar
 
Join Date: Nov 2013
Location: Antioch, Ca.
Posts: 456
Re: Prestone vs Peak vs Dexcool???

Quote:
Originally Posted by Hawghauler View Post
I highly recommend Prestone. But don't buy the 50/50, why pay for water. Get the concentrate. And make sure it's green.
I live by this as well. I don't understand buying 50/50 premix for the same price as concentrate. Doesn't make sense!!! I've never used distilled water either I've never had a coolant related problem. If I was to used distilled water I'd by the 1 gal bottle at Walmart for 1.29 and mix my own.
__________________
Take Care
Troy
Troy Sr is offline   Reply With Quote
Old 12-30-2013, 01:14 AM   #15
capev86
Registered User
 
Join Date: May 2009
Location: Eliot, Maine
Posts: 1,314
Re: Prestone vs Peak vs Dexcool???

dexcool is crap and will eat gaskets over time. never had a problem with green stuff. for water i pour it out of old coolant jugs filled from the dehumidifier in my parents basement (cheap way to get low mineral content water). no matter what you do, radiators, heater cores and any other metal part of a cooling system will go bad eventually.....especially up here in the rust belt. keeping a log of repairs (like i do) makes things easy, but if you coolant looks kinda old or dirty, flush and replace!
capev86 is offline   Reply With Quote
Old 12-30-2013, 01:17 AM   #16
BigRed76
Registered User
 
BigRed76's Avatar
 
Join Date: Jan 2010
Location: Loveland, CO
Posts: 1,921
Re: Prestone vs Peak vs Dexcool???

I understand that some people hate dexcool and refuse to use it, so if you're going to switch from dexcool to the green stuff make sure you completely flush it out. If you just mix the two types of coolant that's when bad stuff happens. It will basically turn into mud over time.
__________________
Zach

1970 Chevrolet Custom Camper K20
1971 GMC Super K2500, 12V/NV4500 swap in progress
1971 Chevrolet Custom C10
1972 Chevrolet Custom Deluxe C20, 5.3/4L60E
1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi
2004 GMC Sierra 2500HD, LB7/Allison, CCSB
2005 GMC Sierra 1500, 5.3/4L60E, CCSB

BigRed76 is offline   Reply With Quote
Old 12-30-2013, 02:03 AM   #17
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,698
Re: Prestone vs Peak vs Dexcool???

Quote:
Originally Posted by Hawghauler View Post
I highly recommend Prestone. But don't buy the 50/50, why pay for water. Get the concentrate.
That's what I've been doing since I started driving in the mid-sixties.
__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is offline   Reply With Quote
Old 12-30-2013, 07:53 PM   #18
lha1992
Registered User
 
lha1992's Avatar
 
Join Date: Apr 2010
Location: Everett, WA
Posts: 504
Re: Prestone vs Peak vs Dexcool???

I run the O'Reillys 50/50 green stuff in all my old trucks an dexcool in my mom's suburban.
lha1992 is offline   Reply With Quote
Old 12-30-2013, 09:50 PM   #19
Tinkermc
Registered User
 
Join Date: Jul 2011
Location: Farmville, Va
Posts: 3,026
Re: Prestone vs Peak vs Dexcool???

if changes every 5 years dexcool works well, but after that it turns into the monster from heck and will eat the gaskets up.
Tinkermc is offline   Reply With Quote
Old 12-30-2013, 10:00 PM   #20
Jraeyre
Registered User
 
Jraeyre's Avatar
 
Join Date: Dec 2013
Location: Moreau, NY
Posts: 17
Re: Prestone vs Peak vs Dexcool???

We use Prestone (green) on everything except the 2002 Bobcat and the 2005 Duramax as they recommend other.

One other thing we do is add Schaeffer "Clean and Cool" to condition the older antifreeze. My understanding is it keeps the acid level in balance. Whatever it does, we get around 20 years on tractor radiators and I just sold my 1995 Chevy p/u with it's original cooling system intact.

Jra
Jraeyre is offline   Reply With Quote
Old 12-30-2013, 10:18 PM   #21
mcbassin
Still Learning
 
mcbassin's Avatar
 
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
Re: Prestone vs Peak vs Dexcool???

Dexcool will turn into mud after about 150K miles. You need to change it before it turns to mud, (ask me how I know). Your heater will completely stop working and it will over heat.
I think Dexcool is for aluminum systems as stated above.

With that said, it's expensive but heck if you only do it say every 100k miles. Not too bad of an investment.

If your truck came out with the green stuff I would stick with it.
mcbassin is offline   Reply With Quote
Old 12-31-2013, 10:17 AM   #22
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
Re: Prestone vs Peak vs Dexcool???

I've never had any issues in anything using antifreeze and never flushing. I have only flushed a couple trucks ever,and only once. We changed out the Dexcool to antifreeze in the '99 ZR2 we bought new,after having "mud" problems in 2 years/50k. Sold to son,and now his friend owns it. We had over 100k on it when we sold it in '05. Water pumps and radiators only last but so long no matter what. I have bought only a few radiators due to leaks in all the trucks I've had and that was caused by age and a lot of sitting. Whatever problems Dexcool is supposed to prevent it replaces with it's own problems,IMO.
Like batteries and tires,there are only a few companies that make antifreeze. I just buy what's cheapest. Never 50/50!
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Reply

Bookmarks

Tags
antifreeze, coolant, dexcool, peak, prestone


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com