![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2003
Location: dallas/ftwoth
Posts: 112
|
rear gears?
im begining too think i dont know what gears i have. from listening to what everybody saying i should be turning around 2300 rpms at 70mph with a turbo 350 307 rear gears and 31 inch tires. but im not. im turning about 3000 rpms is there a easy way too find out what rear gears i have without pulling the cover off the rearend ? i guess the only thing im sure about my rearend is that its a 12 bolt thanks for any help, john
![]() |
![]() |
![]() |
![]() |
#2 |
Coast 2 Coast in 61 mins.
Join Date: Jul 2004
Location: Canton, Illinois
Posts: 33
|
John, try this link lot of good info here for you http://67-72chevytrucks.com/vboard/s....php3?t=105927
__________________
69 C20 71 C10 40 over 454, AT, 3.08 gears 71 Demon 340, 4spd, 4.56 gears 70 RoadRunner 440 6pack, 4spd, 4.10 gears 99 Dakota R/T 360, AT, 3.91 gears ![]() |
![]() |
![]() |
![]() |
#3 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Why not drain the old oil that is only workin at 50% at best?
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2003
Location: dallas/ftwoth
Posts: 112
|
im not understanding what they are saying in that link divide by what?
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() ![]() Join Date: Jan 2005
Location: CA
Posts: 5,527
|
Here's an equation that will calculate your gear ratio.
Gear Ratio = (3000revs/min) x (1/70 mi/hr) x (60min/1hr) x (1mi/5280ft) x (1ft/12in) x (31in x 3.14) Gear Ratio = 3.95 The problem with doing this calculation is that it doesn't take into account the slippage of the torque converter. My guess is that you have 3.73 gears. |
![]() |
![]() |
![]() |
Bookmarks |
|
|