|
11-21-2004, 08:10 PM
|
#1 |
|
Registered User
Join Date: Jan 2004
Location: South Carolina
Posts: 207
|
Dumb Question
Does the transfer case and tranny use the same fluid? Are they all connected as far as the fluids go. In other words if I take fluid out of the transfer case do I put it back via the tranny? Sorry I'm new to 4x4's
|
|
|
|
11-21-2004, 08:13 PM
|
#2 |
|
user # 2756
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
If this is on your 72 then, to answer your question no. The tranny and tc are seperate and each has their own fill and drain plug. I had pics on another computer, but a virus got it. The tranny(4spd) fill on driver side and drain on the bottom/back. For an NP205 tc fill and drain are on the back.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
|
11-21-2004, 09:27 PM
|
#3 |
|
Registered User
Join Date: Jan 2004
Location: South Carolina
Posts: 207
|
Opps, what should I put back in to it. 80/90 gear oil
|
|
|
|
|
11-21-2004, 09:59 PM
|
#4 |
|
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Yes, both the manual tranny and the 205 will use that.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
