bagged - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rollie396 · 01-27-2005, 08:19 PM

I'm planning on bagging my 72 c10.I'm wanting a very basic setup,I won't be running drop spindles and I'm not planning on any major frame mods other than shock relocation if needed and panhard bar mods (maybe a small c notch if absolutely necessary).I'm wondering what problems I can expect to run into.I've heard that there is at least one board member with a bag set up similar to what I'm tryin to describe and would love to see some pics at ride height as well as aired out just to get better idea.

jamis · 01-28-2005, 04:43 PM

I would like to know as well, but with spindles and a c-notch. Stock trailing arms with bags mounted where the springs are. Maybe a picture on how low it will go. Nothing fancy, just to control the front and rear at the same time, no side to side, no jumping.

here is a very nice FAQ from MrShelly

http://67-72chevytrucks.com/vboard/s....php3?t=129463

would like to see the stance for this setup.

MrShelley · 01-28-2005, 06:23 PM

I would like to see stance pictures from this setup too!

Anyone care to donate to the "Get My Truck Finished" fund?

aaron t · 01-28-2005, 08:08 PM

I had pictures but can't find them. I had actually got the pictures from e-mailing brothers trucks and they e-mailed me a couple of pictures from trucks with their kit installed. You can try that. Sorry I can't help more.

Rollie396 · 01-28-2005, 08:26 PM

good idea bout asking a dealer.I'll have to try that.I agree with ya,MrShelley's FAQ was the one that got me thinkin seriously bout doin this (thanks from me,death threats from my wife

).
I was talkin to Jason at SuicideDoors yesterday,and he was tellin me that the basic kit (#1) with the single compressor,1/2" lines,3/8" valves,single 3/8" port,#2600 conitechs,and 5 gallons of tank would get these trucks up in less than a sec!Is this true?Seems like a stretch to me but what do I know

.

FirstGen · 01-28-2005, 08:38 PM

I would love to see this also. Thanks again Mr.Shelly for your help.
I'm surprized SuicideDoors doesn't have any pictures? Anybody asked them?

jamis · 01-29-2005, 07:20 AM

Quote:

Originally Posted by MrShelley

I would like to see stance pictures from this setup too!

Anyone care to donate to the "Get My Truck Finished" fund?

OR.....you can send me your kit and I will take a picture of it on my project

wannabeburbowner · 02-09-2005, 01:33 AM

I would also love to see some pics of a truck set-up like that. With no major mods how low/high will it go??

ricecop425 · 02-09-2005, 03:16 AM

i am in the process of it right now, i cut a inch out of my lower cups but nothing else. i will also not be doin a notch, i want to see how low it is also. but if no one doesn't in time i will post some, i hope to be done here in a week or two, really busy with school and work.

Rollie396 · 02-09-2005, 08:45 PM

I look forward to seeing yours ricecop425.I couldn't wait anymore and decided to order the SD setup.It's on it's way as we speak!

I just hope I don't get any nasty surprises with the cross border shipping.Turns out that very few of their mechanical components are american made so I could have some duty charges to swallow

.
No one has a pic?

bagged69c10 · 02-10-2005, 01:32 AM

I have sort of the setup that you are talking about, heeres what I have- Large bridge notch in rear with the bags on the stock arms but further foward than the stock springs (gets more lift) because depending on how big of a notch you use it will cut into where the spring was with a longer panhard bar (not long enough), and in the front just airbags with the stock bumpstop cut off, no spindles. I would love to post a pic but I am a newbie and dont know how if someone could enlighten me then please do oh yea no wheelwells anywhere.

FirstGen · 02-10-2005, 01:43 AM

if you need help posting a pic you can just email them to me and I will post them for you untill you figure it out. basically they just have to be under 100k to post them on here or you have to resize the pictures. I can do it for you though...
taylorsims@hotmail.com

Rollie396 · 02-12-2005, 09:13 PM

any luck getting pics bagged69c10?We're dyin to see it!

shifty · 04-03-2005, 07:56 AM

*bump*

pbmcauliffe · 04-17-2005, 12:59 AM

Since I had a few of the new Select-a-ride kits in stock, I thought I might as well go ahead and bag the 67 and swap to discs so I could get some pictures.
Basically I am running 2.5" dropped spindles, SD plates with no lower cups (see how it works), 2" blocks in rear with bags in spring location, previous c-notch that steps up to bottom of bed and allows about 5.5" space, bed cut out for pumpkin to fit thru.
Right now the rear can go about .75" lower, but am sitting on the notch now, so theat will need to be stepped more, front will go lower, but tires are hitting front inner fenders and sway bar mounts.
Hope these help, I couldn't pull it forward to get a clear photo because the front tires are buried enough that it wont roll.

ricecop425 · 04-17-2005, 04:20 AM

that looks sick man

Rollie396 · 04-17-2005, 10:23 AM

Awesome!Thanks for posting those.My plans have changed a bit since I posted this.I've got drop spindles ordered,and done a 2.5" c notch.

grovmister · 04-17-2005, 11:15 AM

I am following this post as well. This may be of interest to some of you.
http://www.classicperform.com/tech_a...ow/Sub-Low.htm

I also am waiting for a package from SD.
Mike

Rollie396 · 04-17-2005, 12:45 PM

cool link Mike thanks!

Rowan

grovmister · 04-17-2005, 10:16 PM

Anybody know of clearance issues with running a front sway bar with Bags? I hope to run a 1 1/4" Bar on the front with SD brackets and ART bags.

Some more that may be of interest.

Air Ride Tech. Kit install
http://webrodder.com/article.php?AID=199&SID=60

http://207.97.200.166/manuals/27741.pdf
http://207.97.200.166/manuals/75709.pdf

Thank you MrShelly for not only showing us your install, but for the great pics and documentation.

Thanks Mike

grovmister · 04-18-2005, 03:10 PM

And a couple more.....

http://webrodder.com/article.php?AID=136&SID=5

http://webrodder.com/article.php?AID=137&SID=60

Hope this helps.
Mike

01-28-2005, 06:23 PM	#3
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	I would like to see stance pictures from this setup too! Anyone care to donate to the "Get My Truck Finished" fund? __________________ How I installed my air bags...

01-28-2005, 08:26 PM	#5
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	good idea bout asking a dealer.I'll have to try that.I agree with ya,MrShelley's FAQ was the one that got me thinkin seriously bout doin this (thanks from me,death threats from my wife ). I was talkin to Jason at SuicideDoors yesterday,and he was tellin me that the basic kit (#1) with the single compressor,1/2" lines,3/8" valves,single 3/8" port,#2600 conitechs,and 5 gallons of tank would get these trucks up in less than a sec!Is this true?Seems like a stretch to me but what do I know . __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

01-28-2005, 08:38 PM	#6
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	I would love to see this also. Thanks again Mr.Shelly for your help. I'm surprized SuicideDoors doesn't have any pictures? Anybody asked them? __________________ 1968 C10 build in process TT LSA/6L90e/9"

02-09-2005, 01:33 AM	#8
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	I would also love to see some pics of a truck set-up like that. With no major mods how low/high will it go?? __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

02-09-2005, 03:16 AM	#9
ricecop425 carl Join Date: Nov 2004 Location: seattle Posts: 190	i am in the process of it right now, i cut a inch out of my lower cups but nothing else. i will also not be doin a notch, i want to see how low it is also. but if no one doesn't in time i will post some, i hope to be done here in a week or two, really busy with school and work. __________________ a man and his truck, such a beautiful thing

01-27-2005, 08:19 PM	#1
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	bagged I'm planning on bagging my 72 c10.I'm wanting a very basic setup,I won't be running drop spindles and I'm not planning on any major frame mods other than shock relocation if needed and panhard bar mods (maybe a small c notch if absolutely necessary).I'm wondering what problems I can expect to run into.I've heard that there is at least one board member with a bag set up similar to what I'm tryin to describe and would love to see some pics at ride height as well as aired out just to get better idea. __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

01-28-2005, 04:43 PM	#2
jamis F.A.S.T. president Join Date: Sep 2003 Location: Florida Posts: 1,883	I would like to know as well, but with spindles and a c-notch. Stock trailing arms with bags mounted where the springs are. Maybe a picture on how low it will go. Nothing fancy, just to control the front and rear at the same time, no side to side, no jumping. here is a very nice FAQ from MrShelly http://67-72chevytrucks.com/vboard/s....php3?t=129463 would like to see the stance for this setup. __________________ F.A.S.T. President and Founder Fabricators for the Advancement of Sawsall Technology "A fear of the Sawsall is a sign of retarded sexual and emotional maturity." ~Sigmund Freud, "General Introduction to Psychoanalysis" Last edited by jamis; 01-28-2005 at 04:47 PM.

01-28-2005, 08:08 PM	#4
aaron t Registered User Join Date: Nov 2003 Location: edmonton, alberta Posts: 33	I had pictures but can't find them. I had actually got the pictures from e-mailing brothers trucks and they e-mailed me a couple of pictures from trucks with their kit installed. You can try that. Sorry I can't help more.

02-09-2005, 08:45 PM	#10
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	I look forward to seeing yours ricecop425.I couldn't wait anymore and decided to order the SD setup.It's on it's way as we speak! I just hope I don't get any nasty surprises with the cross border shipping.Turns out that very few of their mechanical components are american made so I could have some duty charges to swallow . No one has a pic? __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

02-10-2005, 01:32 AM	#11
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	I have sort of the setup that you are talking about, heeres what I have- Large bridge notch in rear with the bags on the stock arms but further foward than the stock springs (gets more lift) because depending on how big of a notch you use it will cut into where the spring was with a longer panhard bar (not long enough), and in the front just airbags with the stock bumpstop cut off, no spindles. I would love to post a pic but I am a newbie and dont know how if someone could enlighten me then please do oh yea no wheelwells anywhere. __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD! 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck

02-10-2005, 01:43 AM	#12
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	if you need help posting a pic you can just email them to me and I will post them for you untill you figure it out. basically they just have to be under 100k to post them on here or you have to resize the pictures. I can do it for you though... taylorsims@hotmail.com __________________ 1968 C10 build in process TT LSA/6L90e/9"

02-12-2005, 09:13 PM	#13
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	any luck getting pics bagged69c10?We're dyin to see it! __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

04-03-2005, 07:56 AM	#14
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	bump __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-17-2005, 12:59 AM	#15
pbmcauliffe Registered User Join Date: Nov 2003 Location: Bremerton, WA. Posts: 104	Since I had a few of the new Select-a-ride kits in stock, I thought I might as well go ahead and bag the 67 and swap to discs so I could get some pictures. Basically I am running 2.5" dropped spindles, SD plates with no lower cups (see how it works), 2" blocks in rear with bags in spring location, previous c-notch that steps up to bottom of bed and allows about 5.5" space, bed cut out for pumpkin to fit thru. Right now the rear can go about .75" lower, but am sitting on the notch now, so theat will need to be stepped more, front will go lower, but tires are hitting front inner fenders and sway bar mounts. Hope these help, I couldn't pull it forward to get a clear photo because the front tires are buried enough that it wont roll. Attached Images

04-17-2005, 04:20 AM	#16
ricecop425 carl Join Date: Nov 2004 Location: seattle Posts: 190	that looks sick man __________________ a man and his truck, such a beautiful thing



Register or Log In To remove these advertisements.

04-17-2005, 10:23 AM	#17
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Awesome!Thanks for posting those.My plans have changed a bit since I posted this.I've got drop spindles ordered,and done a 2.5" c notch. __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

04-17-2005, 11:15 AM	#18
grovmister Registered User Join Date: Dec 2003 Location: Eugene Or Posts: 51	Food for Thought? I am following this post as well. This may be of interest to some of you. http://www.classicperform.com/tech_a...ow/Sub-Low.htm I also am waiting for a package from SD. Mike __________________ 72 Chevy C10 LWB 15X8 Chevy Corvette style rallys. 72 Chevy C10 LWB Truck Ralleys, tach, tilt, hidden hitch 72 Chevy Grn C20 Custom Camper 120K Newer Style Truck Alloys, Dailey Driver.

04-17-2005, 12:45 PM	#19
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	cool link Mike thanks! Rowan __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

04-17-2005, 10:16 PM	#20
grovmister Registered User Join Date: Dec 2003 Location: Eugene Or Posts: 51	Anybody know of clearance issues with running a front sway bar with Bags? I hope to run a 1 1/4" Bar on the front with SD brackets and ART bags. Some more that may be of interest. Air Ride Tech. Kit install http://webrodder.com/article.php?AID=199&SID=60 http://207.97.200.166/manuals/27741.pdf http://207.97.200.166/manuals/75709.pdf Thank you MrShelly for not only showing us your install, but for the great pics and documentation. Thanks Mike __________________ 72 Chevy C10 LWB 15X8 Chevy Corvette style rallys. 72 Chevy C10 LWB Truck Ralleys, tach, tilt, hidden hitch 72 Chevy Grn C20 Custom Camper 120K Newer Style Truck Alloys, Dailey Driver.

04-18-2005, 03:10 PM	#21
grovmister Registered User Join Date: Dec 2003 Location: Eugene Or Posts: 51	And a couple more..... http://webrodder.com/article.php?AID=136&SID=5 http://webrodder.com/article.php?AID=137&SID=60 Hope this helps. Mike __________________ 72 Chevy C10 LWB 15X8 Chevy Corvette style rallys. 72 Chevy C10 LWB Truck Ralleys, tach, tilt, hidden hitch 72 Chevy Grn C20 Custom Camper 120K Newer Style Truck Alloys, Dailey Driver.

Register or Log In To remove these advertisements.