OH parts 72 custom/30 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fwells67 · 11-17-2011, 11:20 PM

my son-inlaw bought this in while i was in the hospital and gave me the bucket seats but everything else is for sale and he will be pulling parts off this weekend. has factory buckets/tach/402-4 speed/ no-spin rear and it runs very good he drove it about 100 miles home when he bought it. truck has 79,588 orig miles and has been on the farm since new. he also got the orig no spin rear axle booklet and paperwork

**70shortfleet** · 11-17-2011, 11:27 PM

Put me in line on the tach and steering wheel

**DeadheadNM** · 11-17-2011, 11:29 PM

Interested in the oil press gauge if 80 lb

**DeadheadNM** · 11-17-2011, 11:30 PM

Also interested in the dash if in excellent shape. Thanks.

teeitup · 11-17-2011, 11:31 PM

Manual throttle if good. Thanks Randy

**zicc1835** · 11-17-2011, 11:31 PM

ill take the door panels and the passenger side inner fender well if its solid
thanks

fwells67 · 11-17-2011, 11:32 PM

Quote:

Originally Posted by 70shortfleet

Put me in line on the tach and steering wheel

everything works on this truck and the tach face is excellent. the wheel has no cracks but the grain on the center is worn some. must have been where they held there hand all the time

Nohatch · 11-17-2011, 11:32 PM

You have all the parts im looking for!! I may be interested in the engine and door panels! let me know what the price is. Thanks

fwells67 · 11-17-2011, 11:35 PM

i am not able to check it out but he will be taking off and inspecting all parts this weekend. i will let everyone know the condition and prices when everything is checked out better since i have only glanced at the truck

**DeadheadNM** · 11-17-2011, 11:36 PM

Sorry - are the defrost vents in good shape?

Saw your post about the VA and hope you feel better soon.

fwells67 · 11-17-2011, 11:43 PM

Quote:

Originally Posted by Nohatch

You have all the parts im looking for!! I may be interested in the engine and door panels! let me know what the price is. Thanks

i do know he told me $500 is what he wants for the motor carb to pan and i have a few sets of door panels

fwells67 · 11-17-2011, 11:45 PM

Quote:

Originally Posted by teeitup

Manual throttle if good. Thanks Randy

i will know for sure this weekend but he told me it was complete i just called him about the truck

teeitup · 11-17-2011, 11:48 PM

Thanks no rush, its for my project. Take care of yourself. Thanks Randy

fwells67 · 11-17-2011, 11:50 PM

Quote:

Originally Posted by DeadheadNM

Sorry - are the defrost vents in good shape?

Saw your post about the VA and hope you feel better soon.

thanks these treatments i have to have get me under the weather for a few days after i get them but i will have him check them out for you unless i can get out there tommorrow myself

slammer72 · 11-17-2011, 11:54 PM

Buckets and console pending price and better picks for me please..thanks...hope ya get to feeling better
Posted via Mobile Device

slammer72 · 11-17-2011, 11:59 PM

Ahhhhhhh dang thought I w az s gonna be first on something good:-( ..guess I should read first....
Posted via Mobile Device

Bryon.Dillon · 11-18-2011, 12:03 AM

Interested in outer grill if it's in good shape

IndyRich · 11-18-2011, 12:05 AM

I know its a long shot, but put me in line if there is headliner trim. I know it is sometimes tough to get it off without breaking, but if you are successful I would like it.

fwells67 · 11-18-2011, 12:05 AM

Truck is very complete and there is nothing missing from what i was told. 402 has no smoke or noise at all

fwells67 · 11-18-2011, 12:07 AM

Quote:

Originally Posted by indyrich

i know its a long shot, but put me in line if there is headliner trim. I know it is sometimes tough to get it off without breaking, but if you are successful i would like it.

he said the truck did not come with a headliner but i may have some good trim in the barn i will have him check this weekend

**too much stuff** · 11-18-2011, 12:10 AM

How is the cab? Any emblems? Any brackets for sale off the engine? And any clutch linkage parts.

fwells67 · 11-18-2011, 12:36 AM

Quote:

Originally Posted by too much stuff

How is the cab? Any emblems? Any brackets for sale off the engine? And any clutch linkage parts.

i just talked to him again to get answers to some of these questions and the cab is decent but the drivers cab corner needs replaced, the engine and brackets might be sold and i will let you know if the deal falls through but all clutch and linkage parts are for sale and the emblems are all there and in good shape

Coley · 11-18-2011, 12:36 AM

I wouldn't mind getting in line for the gauge cluster (w/ tach) and the steering wheel.
Any prices on these?
Thanks
Coley

**DeadheadNM** · 11-18-2011, 01:08 AM

Quote:

Originally Posted by fwells67

thanks these treatments i have to have get me under the weather for a few days after i get them but i will have him check them out for you unless i can get out there tommorrow myself

I appreciate your effort and no rush. If the defrost vents are medium olive and intact I'll take them. When possible, let me know what shape this dash pad is in. Maybe I'll take this one too. Also, if the chrome vent windows are in better shape than those on your C20 let me know - I'd like an excellent pair. Best, Pete

slammer72 · 11-18-2011, 01:25 AM

If deadhead passes on the dashpad ill take it....he doesnt need two of em anyway:-)
Posted via Mobile Device

11-17-2011, 11:20 PM	#1
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	parts 72 custom/30 my son-inlaw bought this in while i was in the hospital and gave me the bucket seats but everything else is for sale and he will be pulling parts off this weekend. has factory buckets/tach/402-4 speed/ no-spin rear and it runs very good he drove it about 100 miles home when he bought it. truck has 79,588 orig miles and has been on the farm since new. he also got the orig no spin rear axle booklet and paperwork Attached Images

11-17-2011, 11:27 PM	#2
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,228	Re: parts 72 custom/30 Put me in line on the tach and steering wheel

11-17-2011, 11:29 PM	#3
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,413	Re: parts 72 custom/30 Interested in the oil press gauge if 80 lb __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-17-2011, 11:30 PM	#4
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,413	Re: parts 72 custom/30 Also interested in the dash if in excellent shape. Thanks. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-17-2011, 11:31 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parts 72 custom/30 Manual throttle if good. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-17-2011, 11:31 PM	#6
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,191	Re: parts 72 custom/30 ill take the door panels and the passenger side inner fender well if its solid thanks __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

11-17-2011, 11:32 PM	#8
Nohatch Registered User Join Date: Jul 2006 Location: Ohio Posts: 83	Re: parts 72 custom/30 You have all the parts im looking for!! I may be interested in the engine and door panels! let me know what the price is. Thanks

11-17-2011, 11:35 PM	#9
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: parts 72 custom/30 i am not able to check it out but he will be taking off and inspecting all parts this weekend. i will let everyone know the condition and prices when everything is checked out better since i have only glanced at the truck

11-17-2011, 11:36 PM	#10
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,413	Re: parts 72 custom/30 Sorry - are the defrost vents in good shape? Saw your post about the VA and hope you feel better soon. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-17-2011, 11:48 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parts 72 custom/30 Thanks no rush, its for my project. Take care of yourself. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-17-2011, 11:54 PM	#15
slammer72 Registered User Join Date: Oct 2011 Location: Gresham oregon Posts: 309	Re: parts 72 custom/30 Buckets and console pending price and better picks for me please..thanks...hope ya get to feeling better Posted via Mobile Device

11-17-2011, 11:59 PM	#16
slammer72 Registered User Join Date: Oct 2011 Location: Gresham oregon Posts: 309	Re: parts 72 custom/30 Ahhhhhhh dang thought I w az s gonna be first on something good:-( ..guess I should read first.... Posted via Mobile Device

11-18-2011, 12:03 AM	#17
Bryon.Dillon Registered User Join Date: Nov 2011 Location: Bonney Lake, WA Posts: 43	Re: parts 72 custom/30 Interested in outer grill if it's in good shape

11-18-2011, 12:05 AM	#18
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: parts 72 custom/30 I know its a long shot, but put me in line if there is headliner trim. I know it is sometimes tough to get it off without breaking, but if you are successful I would like it.

11-18-2011, 12:05 AM	#19
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: parts 72 custom/30 Truck is very complete and there is nothing missing from what i was told. 402 has no smoke or noise at all Attached Images



Register or Log In To remove these advertisements.

11-18-2011, 12:10 AM	#21
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,747	Re: parts 72 custom/30 How is the cab? Any emblems? Any brackets for sale off the engine? And any clutch linkage parts. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-18-2011, 12:36 AM	#23
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: parts 72 custom/30 I wouldn't mind getting in line for the gauge cluster (w/ tach) and the steering wheel. Any prices on these? Thanks Coley

11-18-2011, 01:25 AM	#25
slammer72 Registered User Join Date: Oct 2011 Location: Gresham oregon Posts: 309	Re: parts 72 custom/30 If deadhead passes on the dashpad ill take it....he doesnt need two of em anyway:-) Posted via Mobile Device

Register or Log In To remove these advertisements.