72 Dropmember Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blfuller123 · 05-27-2012, 11:03 PM

My dad picked up this burb to rob the big block out of it. I went over to check it out and the truck has almost no rust at all. I have always wanted to build a suburban so after a little barter with my dad, I now have another project. I showed my wife and she wants me to work on this before I finish my 67 SWB truck, so who am I to argue.

I dont know that I am going to get too crazy with body or engine mods, but I am definately going to have a proterbuilt front and rear drop member kits/ a arms and drop spindles. The truck is 6 lug with disc/drum brakes and I dont plan on changing it. Everything on this truck is original, the engine still had the smog pump on it. I think the interior is going to get new paint and the seats recovered. I am thinking 20 inch rims all the way around. I also want to add front and rear air to it. Anyway, here are pictures of day one.

The third door needs a little work and there is a little bit of a dent in the drivers rear quarter, but other than that it looks really straight and solid.

blfuller123 · 05-27-2012, 11:06 PM

Couple more pictures.

sunk99 · 05-28-2012, 12:31 AM

Nice ride.

1968vetL-71 · 05-28-2012, 03:51 PM

Was that the one on craigslist for 1950.00? It has a 3 speed on the column? if so that was a good buy. I would of loved to pick a rust free burb up like that but i'm working out of state right now. Its all about timing.

blfuller123 · 05-28-2012, 04:30 PM

Quote:

Originally Posted by 1968vetL-71

Was that the one on craigslist for 1950.00? It has a 3 speed on the column? if so that was a good buy. I would of loved to pick a rust free burb up like that but i'm working out of state right now. Its all about timing.

It may have been, he just called me and told me to come check it out.

We got the front clip pulled and the drive train out. May be a week or two before I get a chance to do much with it. Here it is today.

**kev2809** · 05-28-2012, 04:44 PM

will be following this one too!

man, i never see any burbs for sale around here, i always think mine is the only one around lol, thats gonna look good laid out

blfuller123 · 05-28-2012, 04:48 PM

Does anyone make an aftermarket dual A/C kit for these?

**kev2809** · 05-28-2012, 05:07 PM

havent seen one with dual, but i havent researched much since the kits are expensive. just seen the vintage air kits for the front...

i need to start saving up tho, it gets hot as hell down here

blfuller123 · 05-29-2012, 01:05 PM

I got the front suspension out before I have to head out of town this afternoon. Need to get the front frame rails cleaned up and get the firewall painted next.

ChuckDriver · 05-31-2012, 09:46 PM

Nice 'burb!

budnikguy · 05-31-2012, 10:10 PM

watching!!!

blfuller123 · 06-01-2012, 06:19 PM

Got the front frame horns stripped, wire brushed and painted.

While I was doing that, my dad started working on the body.

I am going to try and get the firewall painted before I do much more.

blfuller123 · 06-03-2012, 06:57 PM

Got the colum out and the rest of the firewall stripped down. Got all the grime off and scuffed and with any luck, it will have paint on it this week.

Also got the seats out and all the trash and floor mats pulled out. It echos in there now.

blfuller123 · 06-05-2012, 04:07 PM

I picked up primer and got the paint for the firewall.

Got tired of trying to do everything with the body still on the chassis so we spent the bigger part of the morning taking it off. It was a real job to do.

I started stripping down the chassis and made some good progress before it got to hot. Should have the cross members out tomorrow and with any luck, may get the frame cleaned up and painted.

Mr Pops · 06-05-2012, 08:47 PM

Subscribed! Looks like a nice truck to start with.

blfuller123 · 06-06-2012, 03:09 PM

Crossmembers out, cleaned and painted...this chassis sure is long.

jmedero · 06-10-2012, 08:28 PM

Nice work man. Taking that body off the frame really is a pita!! I did mine myself, I thinknill wait for a buddy next time. Lol
Posted via Mobile Device

blfuller123 · 06-10-2012, 09:19 PM

Quote:

Originally Posted by jmedero

Nice work man. Taking that body off the frame really is a pita!! I did mine myself, I thinknill wait for a buddy next time. Lol
Posted via Mobile Device

It was a PITA and I had help, I cant imagine doing it by myself. I think its going to be even more fun putting the bady back on.

jmedero · 06-10-2012, 09:44 PM

Yea I had a scary moment when I knocked over one of the jack stands rolling the body back under it!!
Posted via Mobile Device

**68 Four on the Floor** · 06-15-2012, 05:31 PM

This looks interesting. Your making quick work of it too

blfuller123 · 06-17-2012, 07:35 PM

My kids have been here all week so I havent gotten to really work on the burb. My dad on the other hand got the body work finished up on the drivers side and the back. It is ready to be blocked. Cant do much on the other side until we can get the body moved over.

**kev2809** · 06-17-2012, 07:47 PM

damn! already??

looks good!

jmedero · 06-17-2012, 07:53 PM

Dang I need your dad to come visit.
Posted via Mobile Device

blfuller123 · 06-18-2012, 12:21 PM

Quote:

Originally Posted by jmedero

Dang I need your dad to come visit.
Posted via Mobile Device

He is busy at the moment

blfuller123 · 06-19-2012, 09:30 AM

Got a little time in the garage and got the notchs made up for the rack and pinion. My rear notches are supposed to be shipped on Friday so I will be busy next week. With any luck I will get the chassis together and get the body set back on it.

I need to figure out how I am going to do the back floor. Obviously I need to cut out a section of the floor and move the inner fenders up just dont know how I am going to do it yet.

05-27-2012, 11:03 PM	#1
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	72 Dropmember Suburban-Alice My dad picked up this burb to rob the big block out of it. I went over to check it out and the truck has almost no rust at all. I have always wanted to build a suburban so after a little barter with my dad, I now have another project. I showed my wife and she wants me to work on this before I finish my 67 SWB truck, so who am I to argue. I dont know that I am going to get too crazy with body or engine mods, but I am definately going to have a proterbuilt front and rear drop member kits/ a arms and drop spindles. The truck is 6 lug with disc/drum brakes and I dont plan on changing it. Everything on this truck is original, the engine still had the smog pump on it. I think the interior is going to get new paint and the seats recovered. I am thinking 20 inch rims all the way around. I also want to add front and rear air to it. Anyway, here are pictures of day one. The third door needs a little work and there is a little bit of a dent in the drivers rear quarter, but other than that it looks really straight and solid. Last edited by blfuller123; 12-13-2012 at 08:37 AM.

05-27-2012, 11:06 PM	#2
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 72 Dropmember Suburban Couple more pictures.

05-28-2012, 12:31 AM	#3
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: 72 Dropmember Suburban Nice ride.

05-28-2012, 03:51 PM	#4
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 72 Dropmember Suburban Was that the one on craigslist for 1950.00? It has a 3 speed on the column? if so that was a good buy. I would of loved to pick a rust free burb up like that but i'm working out of state right now. Its all about timing. __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

05-28-2012, 04:44 PM	#6
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: 72 Dropmember Suburban will be following this one too! man, i never see any burbs for sale around here, i always think mine is the only one around lol, thats gonna look good laid out __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-28-2012, 04:48 PM	#7
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 72 Dropmember Suburban Does anyone make an aftermarket dual A/C kit for these?

05-28-2012, 05:07 PM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: 72 Dropmember Suburban havent seen one with dual, but i havent researched much since the kits are expensive. just seen the vintage air kits for the front... i need to start saving up tho, it gets hot as hell down here __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-29-2012, 01:05 PM	#9
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 72 Dropmember Suburban I got the front suspension out before I have to head out of town this afternoon. Need to get the front frame rails cleaned up and get the firewall painted next.

05-31-2012, 09:46 PM	#10
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: 72 Dropmember Suburban Nice 'burb! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

05-31-2012, 10:10 PM	#11
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 72 Dropmember Suburban watching!!!

06-01-2012, 06:19 PM	#12
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 72 Dropmember Suburban Got the front frame horns stripped, wire brushed and painted. While I was doing that, my dad started working on the body. I am going to try and get the firewall painted before I do much more.

06-03-2012, 06:57 PM	#13
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 72 Dropmember Suburban Got the colum out and the rest of the firewall stripped down. Got all the grime off and scuffed and with any luck, it will have paint on it this week. Also got the seats out and all the trash and floor mats pulled out. It echos in there now.

06-05-2012, 04:07 PM	#14
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 72 Dropmember Suburban I picked up primer and got the paint for the firewall. Got tired of trying to do everything with the body still on the chassis so we spent the bigger part of the morning taking it off. It was a real job to do. I started stripping down the chassis and made some good progress before it got to hot. Should have the cross members out tomorrow and with any luck, may get the frame cleaned up and painted.

06-05-2012, 08:47 PM	#15
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: 72 Dropmember Suburban Subscribed! Looks like a nice truck to start with. __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

06-06-2012, 03:09 PM	#16
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 72 Dropmember Suburban Crossmembers out, cleaned and painted...this chassis sure is long.



Register or Log In To remove these advertisements.

06-10-2012, 08:28 PM	#17
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 72 Dropmember Suburban Nice work man. Taking that body off the frame really is a pita!! I did mine myself, I thinknill wait for a buddy next time. Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

06-10-2012, 09:44 PM	#19
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 72 Dropmember Suburban Yea I had a scary moment when I knocked over one of the jack stands rolling the body back under it!! Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

06-15-2012, 05:31 PM	#20
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: 72 Dropmember Suburban This looks interesting. Your making quick work of it too

06-17-2012, 07:35 PM	#21
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 72 Dropmember Suburban My kids have been here all week so I havent gotten to really work on the burb. My dad on the other hand got the body work finished up on the drivers side and the back. It is ready to be blocked. Cant do much on the other side until we can get the body moved over.

06-17-2012, 07:47 PM	#22
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: 72 Dropmember Suburban damn! already?? looks good! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-17-2012, 07:53 PM	#23
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 72 Dropmember Suburban Dang I need your dad to come visit. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

06-19-2012, 09:30 AM	#25
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 72 Dropmember Suburban Got a little time in the garage and got the notchs made up for the rack and pinion. My rear notches are supposed to be shipped on Friday so I will be busy next week. With any luck I will get the chassis together and get the body set back on it. I need to figure out how I am going to do the back floor. Obviously I need to cut out a section of the floor and move the inner fenders up just dont know how I am going to do it yet.

Register or Log In To remove these advertisements.