Autometer gauge cluster- Gringoloco style* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 06-02-2006, 11:31 PM

After spending an eternity looking for the elusive 3 3/8" fuel level gauge for the center hole, I started exploring other options.

I found the arctic white and designer black Autometer quads to be very appealing -one problem- the tach is only offered standard in 3 1/8" and 5". Disgusted, I searched for other options, to no avail.

While searching for another part, I happened upon an ad for the arctic white tach in 3 3/8". Was this a typo? a misprint? a cruel joke? One quick call to Summit confirmed that, indeed, it was available, albeit special order.

Three weeks later, on my doorstep, I find a box full of gauges. Hooray! These things are spendy$$$

After a few weeks of backorder on the gauge bezel from GMCPauls, it finally arrived yesterday. I got to work right away cutting an old cluster to peices to fit the Autometers. This is what came from all the hard work and $$$...

Night Shot

Autometer also provides rubber color filters

I don't really care for the red, looks kinda pink to me. The green is cool, but a little too green, I think. The 'stock' white looks good, it makes the orange needles stand out too. Maybe some blue or white LEDs would look good.

What do you guys think? -Chris

ChevyDude · 06-02-2006, 11:35 PM

That's awesome!!! I like the white light like you said...needles show up best! Great job!

1LoC10 · 06-02-2006, 11:54 PM

those look awesome... are they already LED? Ive never seen regular bulbs so white

*bskylerj* · 06-02-2006, 11:57 PM

I love the look of those.

gmcracing92 · 06-03-2006, 12:11 AM

those look sweet, good call on going with autometers

chevy_fatman · 06-03-2006, 12:13 AM

Those look great!! blue would look awesome in those, got some part numbers you wanna share with us? I may go this route.

72armyswbtruck · 06-03-2006, 12:18 AM

Nice use of the 3 piece gauge setup

1LoC10 · 06-03-2006, 12:22 AM

why are the bulbs so white looking? what kind come in there

gringoloco · 06-03-2006, 12:34 AM

Quote:

Originally Posted by chevy_fatman

Those look great!! blue would look awesome in those, got a part number you wanna share with us? I may go this route.

The Arctic White Series

1303- Electronic Speedo/Electric Quad Gauge combo, 5", All sending units included
1390- Special Order 3 3/8" Tachometer

Designer Black Series

1403 and 1490 respectively

You could probably save some coin by going with a mechanical speedo, if they offer it in 5", and order the quad seperately. I went with the electrical, as I likely will have a 6-speed soon- no mechanical output.

Also, be careful not to order the 1398 or 1498 tach. These are the 3 1/8" versions. Too small.

-Chris

gringoloco · 06-03-2006, 12:36 AM

Quote:

Originally Posted by 72armyswbtruck

Nice use of the 3 piece gauge setup

Yeah, they just looked 'cleaner' to me. And the aforementioned unavailability of gauges to do it any other way...

-Chris

1LoC10 · 06-03-2006, 12:41 AM

damn now I gotta spend more money... Thanks for the ideas on the quad.. and the using of the 3 hole cluster (I never thought of that)..... im going to buy these from classic instruments.. 5" speedo/ tach combo, 5" quad and the 3 3/8 clock..

gringoloco · 06-03-2006, 01:03 AM

Quote:

Originally Posted by 1LoC10

damn now I gotta spend more money... Thanks for the ideas on the quad.. and the using of the 3 hole cluster (I never thought of that)..... im going to buy these from classic instruments.. 5" speedo/ tach combo, 5" quad and the 3 3/8 clock..

Thanks man, that's agood lookin' setup too. Autometer also has the Old Tyme White

and Antique Beige

...if you like that classic look. Not sure on the availability of the tach in those lines though...

FRENCHBLUE72 · 06-03-2006, 02:51 AM

Very nice set-up you dont see too many of the 3 hole guage clusters set-up nice..

Mudder · 06-03-2006, 05:54 AM

Sweet!!!!

matthufham · 06-03-2006, 10:58 AM

that's exactly what i was going to do when i got the money. us 3 hole cluster guys think alike. by the way it looks sweet!

greasemonkey · 06-03-2006, 11:13 AM

That looks awesome, great job!

c10crazy · 06-03-2006, 11:19 AM

The white gauges look really cool but I'm really suprised at how dark the centers are. I would think they would have designed them to be brighter. Did the fuel gauge have the 90 ohm sender for our trucks?

gringoloco · 06-03-2006, 11:20 AM

Quote:

Originally Posted by 1LoC10

why are the bulbs so white looking? what kind come in there

Just a standard blade type 168 bulb. I think they look that way because the gauge faces are so bright to begin with. Notice how they're kinda yellow compared to the daytime pic?

Thanks for all the positive feedback guys

These were stupid easy to install too...

-Chris

gringoloco · 06-03-2006, 11:23 AM

Quote:

Originally Posted by c10crazy

The white gauges look really cool but I'm really suprised at how dark the centers are. I would think they would have designed them to be brighter.

I agree. I'm thinking of getting some 5-bulb LEDs. Just can't decide on blue or white.

The pictures actually exaggerate the effect greatly. The centers are not nearly as dramatically dark in person.

gringoloco · 06-03-2006, 11:26 AM

Quote:

Originally Posted by c10crazy

Did the fuel gauge have the 90 ohm sender for our trucks?

That's the one hang-up on these. It uses a different ohm scale sender.

Good thing is, it comes with the gauges. In-cab tank guys may have trouble adapting it though...

c10crazy · 06-03-2006, 11:31 AM

Quote:

Originally Posted by gringoloco

That's the one hang-up on these. It uses a different ohm scale sender.

Good thing is, it comes with the gauges. In-cab tank guys may have trouble adapting it though...

How will you hook yours up?. Will it work with the Blazer rear tank setups?

gringoloco · 06-03-2006, 11:43 AM

Quote:

Originally Posted by c10crazy

How will you hook yours up?. Will it work with the Blazer rear tank setups?

I have the Blazer style tank, I don't forsee any problems getting it to work properly. I will either replace the stocker with it, or find a way to adapt the sender itself to the stock pickup tube.

You could also, as they suggest, just drill a new hole for it.

It's a universal style, adjustable for depth. It would be a bolt-in affair with a tank from fuelcellguy or a fuel cell.

Looks like this:

Putter · 06-05-2006, 04:22 PM

Man...that is SU-WEEEET. Good work. Very clean look, too.

LUV2XCLR8 · 06-05-2006, 05:32 PM

Sic Wiked my friend, how do they look installed? how's the line of
sight to the guages, I'm tall & that the other style cluster is kinda
useless, I can't even hardly see the lower 4 holes from the angle.

**Yukon Jack** · 06-05-2006, 05:42 PM

That looks great! That will compliment your truck very well!

06-02-2006, 11:31 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Autometer gauge cluster- Gringoloco style* After spending an eternity looking for the elusive 3 3/8" fuel level gauge for the center hole, I started exploring other options. I found the arctic white and designer black Autometer quads to be very appealing -one problem- the tach is only offered standard in 3 1/8" and 5". Disgusted, I searched for other options, to no avail. While searching for another part, I happened upon an ad for the arctic white tach in 3 3/8". Was this a typo? a misprint? a cruel joke? One quick call to Summit confirmed that, indeed, it was available, albeit special order. Three weeks later, on my doorstep, I find a box full of gauges. Hooray! These things are spendy$$$ After a few weeks of backorder on the gauge bezel from GMCPauls, it finally arrived yesterday. I got to work right away cutting an old cluster to peices to fit the Autometers. This is what came from all the hard work and $$$... Night Shot Autometer also provides rubber color filters I don't really care for the red, looks kinda pink to me. The green is cool, but a little too green, I think. The 'stock' white looks good, it makes the orange needles stand out too. Maybe some blue or white LEDs would look good. What do you guys think? -Chris __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

06-02-2006, 11:35 PM	#2
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Autometer gauge cluster- Gringoloco style* That's awesome!!! I like the white light like you said...needles show up best! Great job!

06-02-2006, 11:54 PM	#3
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Autometer gauge cluster- Gringoloco style* those look awesome... are they already LED? Ive never seen regular bulbs so white __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

06-02-2006, 11:57 PM	#4
bskylerj Account Suspended Join Date: Dec 2005 Location: SPOKANE, WASHINGTON Posts: 1,001	Re: Autometer gauge cluster- Gringoloco style* I love the look of those.

06-03-2006, 12:11 AM	#5
gmcracing92 Drillin oil on American Soil! Join Date: Apr 2005 Location: Minot. North Dakota Posts: 418	Re: Autometer gauge cluster- Gringoloco style* those look sweet, good call on going with autometers __________________ Travis 70 Chevy c20 2wd 75 Chevy k10 4x4 parts truck 92 GMC Sierra c1500 2wd DD 99 Chevy Reg Cab Sht Box 1500 2wd 05 GMC Sierra Denali white

06-03-2006, 12:13 AM	#6
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Re: Autometer gauge cluster- Gringoloco style* Those look great!! blue would look awesome in those, got some part numbers you wanna share with us? I may go this route. __________________ Paul How do you make the invisible, visible?.........You take it away. Last edited by chevy_fatman; 06-03-2006 at 12:21 AM.

06-03-2006, 12:18 AM	#7
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Autometer gauge cluster- Gringoloco style* Nice use of the 3 piece gauge setup __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

06-03-2006, 12:22 AM	#8
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Autometer gauge cluster- Gringoloco style* why are the bulbs so white looking? what kind come in there __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << Last edited by 1LoC10; 06-03-2006 at 12:43 AM.

06-03-2006, 12:41 AM	#11
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Autometer gauge cluster- Gringoloco style* damn now I gotta spend more money... Thanks for the ideas on the quad.. and the using of the 3 hole cluster (I never thought of that)..... im going to buy these from classic instruments.. 5" speedo/ tach combo, 5" quad and the 3 3/8 clock.. __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

06-03-2006, 02:51 AM	#13
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Autometer gauge cluster- Gringoloco style* Very nice set-up you dont see too many of the 3 hole guage clusters set-up nice.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-03-2006, 05:54 AM	#14
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Autometer gauge cluster- Gringoloco style* Sweet!!!!

06-03-2006, 10:58 AM	#15
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Autometer gauge cluster- Gringoloco style* that's exactly what i was going to do when i got the money. us 3 hole cluster guys think alike. by the way it looks sweet! Last edited by matthufham; 06-03-2006 at 10:58 AM.

06-03-2006, 11:13 AM	#16
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	Re: Autometer gauge cluster- Gringoloco style* That looks awesome, great job! __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

06-03-2006, 11:19 AM	#17
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	Re: Autometer gauge cluster- Gringoloco style* The white gauges look really cool but I'm really suprised at how dark the centers are. I would think they would have designed them to be brighter. Did the fuel gauge have the 90 ohm sender for our trucks? __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park! Last edited by c10crazy; 06-03-2006 at 11:21 AM.

06-05-2006, 04:22 PM	#23
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Autometer gauge cluster- Gringoloco style* Man...that is SU-WEEEET. Good work. Very clean look, too. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

06-05-2006, 05:32 PM	#24
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: Autometer gauge cluster- Gringoloco style* Sic Wiked my friend, how do they look installed? how's the line of sight to the guages, I'm tall & that the other style cluster is kinda useless, I can't even hardly see the lower 4 holes from the angle. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-05-2006, 05:42 PM	#25
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Autometer gauge cluster- Gringoloco style* That looks great! That will compliment your truck very well! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

Register or Log In To remove these advertisements.