hard start to start - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slowboy · 08-03-2011, 09:35 AM

'72 GMC P/U with 350 A/T Headers and Qudrajet 4bbl

Choke is working fine. But...I have to pump accelerator pedal 7-8 times in the morning, then it might start. If not, I pump it about 1 and a half times more then it starts.

The original 'cold start' instructions on the back of driver's side sunvisor says to press pedal all the way to the floor, and slowly release. Then start engine. If engine does not start, repeat procedure.

How do I get this to work right? I don't remember truck ever starting that easy, but would be great if it would.

Thanks,
Keith

08-03-2011, 09:35 AM	#1
slowboy Registered User Join Date: Nov 2010 Location: WINSTON SALEM, NC Posts: 110	hard start to start '72 GMC P/U with 350 A/T Headers and Qudrajet 4bbl Choke is working fine. But...I have to pump accelerator pedal 7-8 times in the morning, then it might start. If not, I pump it about 1 and a half times more then it starts. The original 'cold start' instructions on the back of driver's side sunvisor says to press pedal all the way to the floor, and slowly release. Then start engine. If engine does not start, repeat procedure. How do I get this to work right? I don't remember truck ever starting that easy, but would be great if it would. Thanks, Keith



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.