NV WTB - OEM and NOS parts for 1971 C/10

[71CHEVYSHORTBED402]

The steel has to be right please (ie show quality, no dents, stripped parts etc), OEM and correct.....Thank you:

1. One NOS hood spring.

2. NOS LH hood hinge, depends on rivet type.

3. Mint LH exterior door handle.

4. Two park light housings with the cable & rubber like new.

5. Mint NOS LH paint divider. FOUND THANK YOU

6. Mint NOS non-tilt shift lever: I believe the part # is 3990301.

7. Hardware for the ground strap from bed to frame. I don't know what the correct hardware ism because mine was missing.

8. Four 1/2" head tapered screws with integrated washers for mounting the cowl panel.

9. Anti-Dieseling Relay hardware. I don't know what the correct hardware is, because mine was missing.

10. Five 5/16" head tapered screws to attach the wire gutter to radiator support. FOUND THANK YOU

11. Four phillips head tapered screws with integrated washers for the glove box perimeter (i.e., glove box liner screws). Nice finish preferred. I'll take them all if nice or need be. FOUND THANK YOU

12. Blower Vent Tube for A/C. If by chance it's super then I'll take it.

13. Interested in the small parts (retainers, screws, nuts, clips etc.) for an A/C system, from the evaporator box forward. Some of those retainers are nylon. Would prefer the nylon is nice, but it doesn't have to be.

14. Center A/C vent housing (aka assembly), good condition and good teeth. I could use a nut or two for attaching the vent to it as well. These have a washer set into the nut. FOUND THANK YOU

15. One or two screws to mount the Vacuum Reservoir to the evaporator Box. These have a washer molded into the head. I don't recall head size, 3/8" I imagine. FOUND THANK YOU

16. Outer grille brackets. I only need the LH side, but I'll buy a pair if need be. FOUND THANK YOU

17. 3-6 door latch screws. These are phillips recessed-head machine screws. The threads are 5/16" x 1/2". FOUND THANK YOU

18. Jack components. I have the jack itself and the spring that holds it onto the floor. All else is missing. FOUND THANK YOU

[71CHEVYSHORTBED402]

Crickets

[71CHEVYSHORTBED402]

Add:

Door latch screws. These are phillips recessed-head machine screws. The threads are 5/16" x 1/2".

Jack components. I have the jack itself and the spring that holds it onto the floor. All else is missing.

[Harris57]

Originally Posted by 71CHEVYSHORTBED402

The steel has to be right please (ie show quality, no dents, stripped parts etc), OEM and correct.....Thank you:

1. One NOS hood spring.

2. NOS LH hood hinge, depends on rivet type.

3. Mint LH exterior door handle.

4. Two park light housings with the cable & rubber like new.

5. Mint NOS LH paint divider.

6. Mint NOS non-tilt shift lever: I believe the part # is 3990301.

7. Hardware for the ground strap from bed to frame. I don't know what the correct hardware ism because mine was missing.

8. Four 1/2" head tapered screws with integrated washers for mounting the cowl panel.

9. Anti-Dieseling Relay hardware. I don't know what the correct hardware is, because mine was missing.

10. Five 5/16" head tapered screws to attach the wire gutter to radiator support.

11. Four phillips head tapered screws with integrated washers for the glove box perimeter (i.e., glove box liner screws). Nice finish preferred. I'll take them all if nice or need be.

12. Blower Vent Tube for A/C. If by chance it's super then I'll take it.

13. Interested in the small parts (retainers, screws, nuts, clips etc.) for an A/C system, from the evaporator box forward. Some of those retainers are nylon. Would prefer the nylon is nice, but it doesn't have to be.

14. Center A/C vent housing (aka assembly), good condition and good teeth. I could use a nut or two for attaching the vent to it as well. These have a washer molded into the head.

15. One or two screws to mount the Vacuum Reservoir to the evaporator Box. These have a washer molded into the head. I don't recall head size, 3/8" I imagine.

16. Outer grille brackets. I only need the LH side, but I'll buy a pair if need be.

17. 3-6 door latch screws. These are phillips recessed-head machine screws. The threads are 5/16" x 1/2".

18. Jack components. I have the jack itself and the spring that holds it onto the floor. All else is missing.

I have 14 if I can find it. Chrome deflector, plastic diverter and special nuts that hold it together. I'll look for it. I may have a jack crank as well.

[Harris57]

Originally Posted by Harris57

I have 14 if I can find it. Chrome deflector, plastic diverter and special nuts that hold it together. I'll look for it. I may have a jack crank as well.

I found the A/C vent but no jack pieces yet

[71CHEVYSHORTBED402]

Thanks for looking. If you're willing to part, I really don't need the center vent, just the housing and nuts. Other than that, let me know what I owe ya........

Not happy about having to look for jack parts, but that's what I get for my ignorance. Not that I chucked them. More I didn't know the what.

[Blue/72]

Do you need a leaf or coil spring jack?

[Harris57]

Originally Posted by 71CHEVYSHORTBED402

Thanks for looking. If you're willing to part, I really don't need the center vent, just the housing and nuts. Other than that, let me know what I owe ya........

Not happy about having to look for jack parts, but that's what I get for my ignorance. Not that I chucked them. More I didn't know the what.

I don't need the vent either, how does $25.00 shipped sound for everything and you have a spare?

[71CHEVYSHORTBED402]

Originally Posted by Blue/72

Do you need a leaf or coil spring jack?

Ah, didn't know there was a difference. I have leaf springs.

[71CHEVYSHORTBED402]

Originally Posted by Harris57

I don't need the vent either, how does $25.00 shipped sound for everything and you have a spare?

AWESOME...........You take paypal? I'll pay their fees. Thanks a bunch.

[1rippen6]

I should have all the small fasteners but will be until Wednesday next week before I can look.

[FirstOwner69]

This should take care of much of your list.

1st Picture, Hardware: Top row- cowl screws (black and stainless), wire gutter screws, glove box screws and latch plate, A/C vacuum reservoir screws. Second row- door latch screws, jack tool spring with hardware.

2nd, 3rd and 4th pictures: rear paint divider moldings (restored). All 3 pieces plus all but 1 or 2 of the clips.

5th picture: both grille brackets (sandblasted). Some pitting.

Prices:
- Hardware- free
- Moldings- $40 plus shipping.
- Brackets- $20 plus shipping.

Jim

[gmachinz]

I have an NOS LH exterior door handle. $175 shipped.

[jr1000yarder]

If the Op passes on paint divider, I'll take it for my truck

[71CHEVYSHORTBED402]

Originally Posted by FirstOwner69

This should take care of much of your list.

1st Picture, Hardware: Top row- cowl screws (black and stainless), wire gutter screws, glove box screws and latch plate, A/C vacuum reservoir screws. Second row- door latch screws, jack tool spring with hardware.

2nd, 3rd and 4th pictures: rear paint divider moldings (restored). All 3 pieces plus all but 1 or 2 of the clips.

5th picture: both grille brackets (sandblasted). Some pitting.

Prices:
- Hardware- free
- Moldings- $40 plus shipping.
- Brackets- $20 plus shipping.

Jim

Appreciate it Jim............Sold.

[FirstOwner69]

Originally Posted by 71CHEVYSHORTBED402

Appreciate it Jim............Sold.

Sounds good, Tony.

I won't be able to get stuff packed up for shipping charges until midweek. Hope that's OK. Please PM your mailing address.

Jim

[71CHEVYSHORTBED402]

Originally Posted by FirstOwner69

Sounds good, Tony.

I won't be able to get stuff packed up for shipping charges until midweek. Hope that's OK. Please PM your mailing address.

Jim

Gosh I don't know, I was planning on installing this stuff late 2017, at the earliest.

Appreciate those who set me up........Thanks.

[71CHEVYSHORTBED402]

Originally Posted by gmachinz

I have an NOS LH exterior door handle. $175 shipped.

A bit over my budget, but thanks for the response.

[71CHEVYSHORTBED402]

A little props to Jim "FirstOwner" - The paint dividers and retainer between them were restored to the cat's meow.