Rocker Panel ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

motocrosschump · 04-12-2006, 04:13 PM

I know..do the search...I did but not the answer I was looking for.

I bought inner and outer rockers from GMCPauls. Removed the right side and went to install the inner, everything looked good. Installed Outer tacted it in place. Now there is a 3/4 gap from the inner and outer in the door opening where the chrome strip goes. Is it suppose to be like that? the bottom of the two pieces line up. (BTW does the bottom inner and outter rocker need to be welded together?

This is my first rocker replacement so don't through rocks at me.

04-12-2006, 04:13 PM	#1
motocrosschump Registered User Join Date: May 2005 Location: Texarkana, AR 71854 Posts: 397	Rocker Panel ? I know..do the search...I did but not the answer I was looking for. I bought inner and outer rockers from GMCPauls. Removed the right side and went to install the inner, everything looked good. Installed Outer tacted it in place. Now there is a 3/4 gap from the inner and outer in the door opening where the chrome strip goes. Is it suppose to be like that? the bottom of the two pieces line up. (BTW does the bottom inner and outter rocker need to be welded together? This is my first rocker replacement so don't through rocks at me. __________________ 2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.