Aluminum Gen I Vortec timing cover..If you're tired of plastic - The 1947 - Present Chevrolet & GMC Truck Message Board Network

speedygonzales · 01-09-2019, 10:18 AM

Came across this some months ago.

cast aluminum timing cover

95 S_Trucker · 01-09-2019, 10:49 AM

I looks like it is cast for a crankshaft position sensor, but it looks like it wasn't machined.

It doesn't look like it will work on stock engines.

EDIT: It says in the description: Timing Cover, 1-Piece, Aluminum, Black, Chevrolet, Small Block, Without Crank Sensor, Each

The only bad thing about the plastic ones is they aren't re-usable. The gasket is glued/bonded to the cover. But they are cheap enough that it doesn't matter. They don't have issues with leaking, and I've never seen one crack/break.

95 S_Trucker · 01-09-2019, 10:55 AM

I did some more digging.

They do offer 2 covers that will work with crankshaft position sensors:

https://www.summitracing.com/parts/hly-21-153/overview/

https://www.summitracing.com/parts/hly-21-152/overview/

01-09-2019, 10:18 AM	#1
speedygonzales Registered User Join Date: Jan 2006 Location: Smithfield, VA Posts: 1,501	Aluminum Gen I Vortec timing cover..If you're tired of plastic Came across this some months ago. cast aluminum timing cover __________________ 99 Z71 (98 body style) Pride and joy

01-09-2019, 10:49 AM	#2
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: Aluminum Gen I Vortec timing cover..If you're tired of plastic I looks like it is cast for a crankshaft position sensor, but it looks like it wasn't machined. It doesn't look like it will work on stock engines. EDIT: It says in the description: Timing Cover, 1-Piece, Aluminum, Black, Chevrolet, Small Block, Without Crank Sensor, Each The only bad thing about the plastic ones is they aren't re-usable. The gasket is glued/bonded to the cover. But they are cheap enough that it doesn't matter. They don't have issues with leaking, and I've never seen one crack/break.

01-09-2019, 10:55 AM	#3
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: Aluminum Gen I Vortec timing cover..If you're tired of plastic I did some more digging. They do offer 2 covers that will work with crankshaft position sensors: https://www.summitracing.com/parts/hly-21-153/overview/ https://www.summitracing.com/parts/hly-21-152/overview/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.