The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech > 67-72

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-25-2016, 11:15 PM   #1
tlman
Registered User
 
Join Date: May 2014
Location: rodney ,ontario canada
Posts: 111
steering column

trying to figure out other than stock ,,which steering column is closest to fitting a 67-72 any ideas?
tlman is offline   Reply With Quote
Old 02-13-2016, 11:00 PM   #2
fredm98
Active Member
 
Join Date: May 2009
Location: Sioux Falls, SD
Posts: 110
Re: steering column

You can use one from a Chevy van up to I think a 79. Not positive on the year. I got a tilt one from a 76 and it didn't have the key in it so worked perfect.
fredm98 is offline   Reply With Quote
Old 08-07-2016, 01:14 AM   #3
izzy_Britton
Registered User
 
izzy_Britton's Avatar
 
Join Date: Apr 2013
Location: Nor-Cal
Posts: 632
Re: steering column

Why are you wanting to change out your steering column?

I too am looking because i need a column that is situated closer to the dash.

subscribed.
__________________
WHO_DCTC - Wifes 05 Z-71 Build - Now defunct as she decided she wants an Escalade too
Cream Puff - LS'd Square - Slow going on the back burner
Tripple Threat - 3 Wrecks for the price of one build thread
Project Delongdium - Step-Sons Plastic Clad 2003 Avalanche - DONE and Delivered.
izzy_Britton is offline   Reply With Quote
Old 05-03-2017, 02:02 PM   #4
sackracing
Registered User
 
sackracing's Avatar
 
Join Date: Mar 2017
Location: Louisville
Posts: 46
Re: steering column

I found this on a google search yesterday. I am going to try to do this with mine this weekend.

http://67-72chevytrucks.com/vboard/s...d.php?t=191143
sackracing is offline   Reply With Quote
Old 05-12-2017, 11:18 PM   #5
68c10airstream
Registered User
 
68c10airstream's Avatar
 
Join Date: Mar 2013
Location: Marquette michigan
Posts: 828
Re: steering column

Sackracing, just for info sake, the intermediate shaft (the shaft under the hood connecting column to gearbox) is plastic injected because it's designed as a break away feature needed when in a head on collision! If i was doing this mod i would cut it off right down at the rag joint area, remove the amount you want to move the column, and as you weld it back up keep the shaft cold with wet rags/and or ice cubes. This way you will retain the full amount of collapse the engineers designed into it, and not melt the plastic!

My mother was in a head on collision in a 74 saab and the seat belt didn't latch and she was impaled against the steering wheel. She held the wheel so hard that her hands were pinned against the sides of the column because she bent the wheel forward!!! I knew the intermediate shaft could collapse and it did as i inspected it once i got the mangled hood up. I can just imagine the steering wheel being forced up at her if the shaft was solid or shortened or incorrectly modified.

My wife can vouch for the many times i ***** out loud at the times i see in a magazine or on tv the double "D" shaft running between 2 u joints connecting a steering rack to a column and have no provision to collapse. Sorry for the rant but if i can reach one person and get them to re-think the process, mission accomplished!!
68c10airstream is offline   Reply With Quote
Old 09-07-2019, 11:48 AM   #6
Duck1
Registered User
 
Join Date: Dec 2018
Location: San Bernardino
Posts: 72
Re: steering column

Without the plastic. I think it'll collapse easier?!.
Duck1 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:09 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com