VA WTB 69-71 blazer filler neck and tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**19702wdc10** · 03-08-2014, 02:20 PM

I am looking to put a second tank in my 1970 c10 using 1969 to 1971 blazer parts.
Please send info on any of the parts you have to sell.
Thanks
Joe

**NGN** · 03-08-2014, 02:29 PM

Is the 1972 diffrent then. 69 - 71 and is there a diffrence with 2 wheel or 4 wheel drive.

**19702wdc10** · 03-08-2014, 03:39 PM

The 1972 has a solid steel filler neck all the way to tank, the others have a fill neck then a hose section and then steel below the bed towards tank. The gas cap is also a different size.

I am not sure if there is a difference between 2WD and 4 WD

Thanks
Joe

Jake1971 · 03-08-2014, 03:53 PM

Borrowed from other threads: Name: 1972 Blazer filler neck.jpeg
Views: 1829
Size: 54.4 KB

Name: filler neck.jpg
Views: 1825
Size: 75.5 KB

These are from 1972 Blazers. Hope this helps.
Also available from another member are some nice kits at http://gmcpauls.com/fuel_tank_&_related.htm

**19702wdc10** · 03-08-2014, 10:01 PM

Thanks for the pictures.

Is the pipe next to the fill neck in the blazer picture part of the fuel system?

Joe

ABNGRNT13 · 03-09-2014, 12:55 AM

Vent tube

**19702wdc10** · 03-09-2014, 01:57 AM

Thank you

superlifted · 03-10-2014, 10:31 PM

I have a tank shipped from nm its a poly tank

**19702wdc10** · 03-10-2014, 10:39 PM

Thank you but I a looking for a metal tank.

Do you have any other Blazer fuel pieces like fill neck or lower filler pipe?

Joe

**1rippen6** · 03-11-2014, 08:59 PM

I have a 71 setup with filler tube, bottom elbow, gasket w/ plate, and cover. I sandblasted the bottom elbow because it was pretty rusty and blew a hole thru it. I had a guy at work tig weld it with what he called silicone bronze wire and pressure tested it to 15 psi. I have a photo of the repair. The cover has the one corner rusted off I included a picture of the other side to compare. 100 shipped for everything. I have a tank also w/ sending unit that was on my blazer when I 4wheeled it so it has dents in the bottom but no holes. Let me know if interested and I will figure out a price. Sending unit worked when I pulled it out but that was 6 + years ago and two moves.

**1rippen6** · 03-11-2014, 09:01 PM

forgot pictures

**19702wdc10** · 03-11-2014, 09:33 PM

Hello
Yes interested in the items pictured and also the tank and does it have the tank straps?
Do you have fuel vent tube?
Thanks
Joe

**1rippen6** · 03-11-2014, 09:48 PM

I have straps will they work for what you are doing? 100 dollars for the tank that will be 200 for everything plus shipping.

**19702wdc10** · 03-11-2014, 10:09 PM

The factory tank is supposed to fit with the factory straps
is it possible to send picture
Thanks
Joe

**1rippen6** · 03-11-2014, 10:10 PM

Yep will send tomorrow

**19702wdc10** · 03-11-2014, 10:17 PM

Do have vent tube?

**1rippen6** · 03-11-2014, 10:32 PM

Sorry forgot to respond the first time you asked unfortunately I do not. I do not even have one for my build.

**1rippen6** · 03-11-2014, 10:35 PM

I may have a friend that has one I will ask him tomorrow

**1rippen6** · 03-12-2014, 06:59 PM

My friend does not have a vent tube attached pics of the gas tank, straps, and spacer between the tank and frame(I am guessing you will need this). Something else I could probably meet you in Winchester if that would work for you

**1rippen6** · 03-12-2014, 09:37 PM

Vent tube for sale

http://67-72chevytrucks.com/vboard/s...d.php?t=618729

**19702wdc10** · 03-13-2014, 11:20 AM

Winchester will work great
how is the filler neck on the tank, any damage?

**1rippen6** · 03-13-2014, 12:00 PM

No i can get better pictures if you like the edge might have a ding in it but nothing major. If you want to meet in Winchester I have a second tank I will bring them both and you can have you pick same condition. PM sent

03-08-2014, 02:20 PM	#1
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	WTB 69-71 blazer filler neck and tank I am looking to put a second tank in my 1970 c10 using 1969 to 1971 blazer parts. Please send info on any of the parts you have to sell. Thanks Joe

03-08-2014, 02:29 PM	#2
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 820	Re: WTB 69-71 blazer filler neck and tank Is the 1972 diffrent then. 69 - 71 and is there a diffrence with 2 wheel or 4 wheel drive.

03-08-2014, 03:39 PM	#3
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank The 1972 has a solid steel filler neck all the way to tank, the others have a fill neck then a hose section and then steel below the bed towards tank. The gas cap is also a different size. I am not sure if there is a difference between 2WD and 4 WD Thanks Joe

03-08-2014, 03:53 PM	#4
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: WTB 69-71 blazer filler neck and tank Borrowed from other threads: These are from 1972 Blazers. Hope this helps. Also available from another member are some nice kits at http://gmcpauls.com/fuel_tank_&_related.htm __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet" Last edited by Jake1971; 03-08-2014 at 03:59 PM.

03-08-2014, 10:01 PM	#5
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Thanks for the pictures. Is the pipe next to the fill neck in the blazer picture part of the fuel system? Joe

03-09-2014, 12:55 AM	#6
ABNGRNT13 Registered User Join Date: Dec 2013 Location: Fort Mitchell, AL (out the back gate of Ft Benning) Posts: 140	Re: WTB 69-71 blazer filler neck and tank Vent tube __________________ SSG Walker Harris '72 Cheyenne Longbed '66 Panel '66 Short Stepside '65 Short Fleetside

03-09-2014, 01:57 AM	#7
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Thank you

03-10-2014, 10:31 PM	#8
superlifted Registered User Join Date: Nov 2009 Location: farmington nm Posts: 178	Re: WTB 69-71 blazer filler neck and tank I have a tank shipped from nm its a poly tank

03-10-2014, 10:39 PM	#9
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Thank you but I a looking for a metal tank. Do you have any other Blazer fuel pieces like fill neck or lower filler pipe? Joe

03-11-2014, 08:59 PM	#10
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: WTB 69-71 blazer filler neck and tank I have a 71 setup with filler tube, bottom elbow, gasket w/ plate, and cover. I sandblasted the bottom elbow because it was pretty rusty and blew a hole thru it. I had a guy at work tig weld it with what he called silicone bronze wire and pressure tested it to 15 psi. I have a photo of the repair. The cover has the one corner rusted off I included a picture of the other side to compare. 100 shipped for everything. I have a tank also w/ sending unit that was on my blazer when I 4wheeled it so it has dents in the bottom but no holes. Let me know if interested and I will figure out a price. Sending unit worked when I pulled it out but that was 6 + years ago and two moves.

03-11-2014, 09:01 PM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: WTB 69-71 blazer filler neck and tank forgot pictures Attached Images

03-11-2014, 09:33 PM	#12
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Hello Yes interested in the items pictured and also the tank and does it have the tank straps? Do you have fuel vent tube? Thanks Joe

03-11-2014, 09:48 PM	#13
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: WTB 69-71 blazer filler neck and tank I have straps will they work for what you are doing? 100 dollars for the tank that will be 200 for everything plus shipping.

03-11-2014, 10:09 PM	#14
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank The factory tank is supposed to fit with the factory straps is it possible to send picture Thanks Joe

03-11-2014, 10:10 PM	#15
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: WTB 69-71 blazer filler neck and tank Yep will send tomorrow



Register or Log In To remove these advertisements.

03-11-2014, 10:17 PM	#16
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Do have vent tube?

03-11-2014, 10:32 PM	#17
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: WTB 69-71 blazer filler neck and tank Sorry forgot to respond the first time you asked unfortunately I do not. I do not even have one for my build.

03-11-2014, 10:35 PM	#18
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: WTB 69-71 blazer filler neck and tank I may have a friend that has one I will ask him tomorrow

03-12-2014, 06:59 PM	#19
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: WTB 69-71 blazer filler neck and tank My friend does not have a vent tube attached pics of the gas tank, straps, and spacer between the tank and frame(I am guessing you will need this). Something else I could probably meet you in Winchester if that would work for you Attached Images

03-12-2014, 09:37 PM	#20
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: WTB 69-71 blazer filler neck and tank Vent tube for sale http://67-72chevytrucks.com/vboard/s...d.php?t=618729

03-13-2014, 11:20 AM	#21
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Winchester will work great how is the filler neck on the tank, any damage?

03-13-2014, 12:00 PM	#22
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: WTB 69-71 blazer filler neck and tank No i can get better pictures if you like the edge might have a ding in it but nothing major. If you want to meet in Winchester I have a second tank I will bring them both and you can have you pick same condition. PM sent

Register or Log In To remove these advertisements.