1972 GMC Using 2003 Chevy 2500HD duramax Chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1tonwannabe · 09-11-2012, 07:16 PM

This is my first post.
I have a 1972

C2500 Sierra Grande. I had a couple ideas for the truck in the beginning, but I new I at least wanted a 4wd. I eventually came across a rolled 2003 Chevrolet 2500HD with a Duramax/Allison with 100,000 Miles on it. In the long run I thought it would be cheaper since it ran. Otherwise I would have to drop about $4500 in a motor, about $1000 in a trans., and $500-$1000 in each differential that I had. This 2003 chassis didn't need all that. The price of the truck was $6700 on ebay. This was a steal from what I've found in the past. I bought the truck and had it shipped to Ohio.
Basically what I have now is the makings of a pretty Bad Ass tough truck. It will get around 20 MPG. or better according to some of you. I can tow anything with it. If it's built the way I want, then it will have a lot of modern conveniences, but still have the cool body of a 67-72. I plan 0n trying to use everything. I am putting the 72 on the 2003 chassis. I will try to use the interior of the new truck, the gauges, steering wheel, center console, and brake pedals.
I'll post pictures as soon as I figure out how to.

Chevy1TonFun · 09-11-2012, 07:31 PM

I'll be watching this one. Have fun with all the metal fab!

1tonwannabe · 09-11-2012, 07:35 PM

I don't think anyone will get to see it. I'm trying to figure out how to post pics. It says something about making an album. The help section of this site sucks. Says go to control panel which I did and the next step after that is a dead end.
Not worth my time.

onebadbowtie · 09-11-2012, 08:15 PM

create a photobucket account on photobucket.com then uplead your pics to that site. Then copy and paste the image codes from your pictures there to your posts on here. that is the simplest way

1tonwannabe · 09-12-2012, 02:08 AM

Thanks
Posted via Mobile Device

**Dieselwrencher** · 09-12-2012, 02:30 AM

Sounds like a sweet project man! Get the pics uploaded.

birdistheword · 09-12-2012, 05:21 AM

Sounds like a fun project. I've been looking into just swapping in a 6.2/6.5 in my 72 K-10.

1tonwannabe · 09-13-2012, 08:02 AM

2003 Chevrolet 2500HD That I started out with.

1972 GMC Sierra Grande I took it apart before I took a picture of it. It was complete minus the motor.

1tonwannabe · 09-13-2012, 08:07 AM

Here are the pics to get me started. I'll try to update everything soon. I'm fitting and welding the body mounts on the frame now. I'm a long way from the pics above, but I still have a long way to go.

1tonwannabe · 09-13-2012, 06:34 PM

I tore down the newer truck to just the frame and drivetrain with a saws-all.

1tonwannabe · 09-13-2012, 06:39 PM

The 2003 chassis is 16.5 inches too long. The way this frame is built, they slid the front part of the frame into the rear. So all they had to do was make one front frame that fits everything, and GM could slide in a longbed frame, or a shortbed, or a crewcab etc. in the rear. All I did was remove the factory weld where the front and rear frames join and sepperated it.

1tonwannabe · 09-13-2012, 06:41 PM

Almost forgot. I did not cut any wires. What you are left with is a giant pile of wires.

1tonwannabe · 09-13-2012, 06:42 PM

Sorry about picture quality, they were taken with my phone.

1tonwannabe · 09-13-2012, 06:43 PM

After I removed the 16.5 inches I slid the frame back together.

1tonwannabe · 09-13-2012, 06:49 PM

You can see in some of the pics were I braced the frame with I-beams. The frame went together very easily. I then welded the frame just like the factory did.

1tonwannabe · 09-13-2012, 06:52 PM

The only other things that I had to shorten were the fuel lines, brake lines, and exhaust. The flanges were cut from the exhaust by the transmission. I shortened the pipes and re-welded the flanges back on.

1tonwannabe · 09-13-2012, 07:00 PM

The center of the 2003 frame drops down farther than a 67-72 frame. If you put a 67-72 body on a newer frame, the cab would sit alot lower than the bed. This is the problem with doing what I'm doing.
My fix was removing the crossmembers from the bottum of the bed. This would drop the bed to the frame by about 3.5 inches. The cab will sit 5 inches above the frame, which sounds like a lot but if you look at a 2000's 2500HD truck about the same amount of frame is showing.
Your not going to see through to the other side.

1tonwannabe · 09-13-2012, 07:01 PM

I bought some Hummer H2 wheels and tires. The tires are 35 inches. I'll post pics later of them on the truck.

1tonwannabe · 09-13-2012, 07:03 PM

1tonwannabe · 09-13-2012, 07:14 PM

Here's a pic of the mounts I made for the body. I used 3"X3"X1/4" square tubing and cut off one side to make a U. I bought a bushing kit from DIY4X.com. Which consists of a 2" sleeve bushing, a greasable bolt, and DOM tubing. The 3" tubing I made into a U was bolted to the front body mount bolt hole. This way all I had to do was weld a locking nut to the U, and drop a bolt in the original bolt hole in the body. Then I made a bracket to weld to the bushing DOM tube. The bracket will be welded to the frame. You know you did it right when you can use the same exact bracket on the other side of the truck. I made the bracket that holds the bushing out of 2"x3"X1/4" tubing.

1tonwannabe · 09-13-2012, 07:17 PM

Driver side.

1tonwannabe · 09-13-2012, 07:19 PM

Just wanted to say how helpful DIY4X.com is. They are a lifesaver. They have all kinds of things for us DIY people.

**fakerwade** · 09-13-2012, 07:29 PM

Hey, this build sounds kinda familiar!!!

**Dieselwrencher** · 09-13-2012, 08:34 PM

Great work on it! It's looking really good!

y5mgisi · 09-13-2012, 08:40 PM

Awesome job man! Cant wait to see it finished!

09-11-2012, 07:16 PM	#1
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	1972 GMC Using 2003 Chevy 2500HD duramax Chassis This is my first post. I have a 1972 C2500 Sierra Grande. I had a couple ideas for the truck in the beginning, but I new I at least wanted a 4wd. I eventually came across a rolled 2003 Chevrolet 2500HD with a Duramax/Allison with 100,000 Miles on it. In the long run I thought it would be cheaper since it ran. Otherwise I would have to drop about $4500 in a motor, about $1000 in a trans., and $500-$1000 in each differential that I had. This 2003 chassis didn't need all that. The price of the truck was $6700 on ebay. This was a steal from what I've found in the past. I bought the truck and had it shipped to Ohio. Basically what I have now is the makings of a pretty Bad Ass tough truck. It will get around 20 MPG. or better according to some of you. I can tow anything with it. If it's built the way I want, then it will have a lot of modern conveniences, but still have the cool body of a 67-72. I plan 0n trying to use everything. I am putting the 72 on the 2003 chassis. I will try to use the interior of the new truck, the gauges, steering wheel, center console, and brake pedals. I'll post pictures as soon as I figure out how to. Last edited by 1tonwannabe; 09-11-2012 at 07:25 PM.

09-11-2012, 07:31 PM	#2
Chevy1TonFun Grease Monkey Join Date: Oct 2007 Location: Fresno CA Posts: 750	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis I'll be watching this one. Have fun with all the metal fab! __________________ Tow Rig: 2012 Chevy 2500HD CCSB LTZ Z71 4x4 Duramax Ultimate Offroad Build: 1978 Chevy Silverado K30 Crewcab Build Link http://67-72chevytrucks.com/vboard/s...d.php?t=654053 Mud Truck: 1972 Chevy Cheyenne K30 4x4, 468/400/205, D60/D70HD, 18" Custom Lift, 17x39" IROKs FOR SALE http://67-72chevytrucks.com/vboard/c...ton-4x4&cat=12

09-11-2012, 07:35 PM	#3
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis I don't think anyone will get to see it. I'm trying to figure out how to post pics. It says something about making an album. The help section of this site sucks. Says go to control panel which I did and the next step after that is a dead end. Not worth my time.

09-11-2012, 08:15 PM	#4
onebadbowtie Registered User Join Date: Feb 2010 Location: Parsons, KS Posts: 357	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis create a photobucket account on photobucket.com then uplead your pics to that site. Then copy and paste the image codes from your pictures there to your posts on here. that is the simplest way __________________ James 94' Chevy K1500 Extended Cab 4x4 5.7 72' Chevy LWB K10, 350, SM465, NP205 Project "Daily Driver"

09-12-2012, 02:08 AM	#5
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Thanks Posted via Mobile Device

09-12-2012, 02:30 AM	#6
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Sounds like a sweet project man! Get the pics uploaded. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-12-2012, 05:21 AM	#7
birdistheword Registered User Join Date: Apr 2011 Location: Tacoma, Washington Posts: 236	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Sounds like a fun project. I've been looking into just swapping in a 6.2/6.5 in my 72 K-10.

09-13-2012, 08:02 AM	#8
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis 2003 Chevrolet 2500HD That I started out with. 1972 GMC Sierra Grande I took it apart before I took a picture of it. It was complete minus the motor. Last edited by 1tonwannabe; 09-13-2012 at 08:18 AM.

09-13-2012, 08:07 AM	#9
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Here are the pics to get me started. I'll try to update everything soon. I'm fitting and welding the body mounts on the frame now. I'm a long way from the pics above, but I still have a long way to go. Last edited by 1tonwannabe; 09-13-2012 at 08:21 AM.

09-13-2012, 06:34 PM	#10
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis I tore down the newer truck to just the frame and drivetrain with a saws-all.

09-13-2012, 06:39 PM	#11
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis The 2003 chassis is 16.5 inches too long. The way this frame is built, they slid the front part of the frame into the rear. So all they had to do was make one front frame that fits everything, and GM could slide in a longbed frame, or a shortbed, or a crewcab etc. in the rear. All I did was remove the factory weld where the front and rear frames join and sepperated it.

09-13-2012, 06:41 PM	#12
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Almost forgot. I did not cut any wires. What you are left with is a giant pile of wires.

09-13-2012, 06:42 PM	#13
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Sorry about picture quality, they were taken with my phone.

09-13-2012, 06:43 PM	#14
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis After I removed the 16.5 inches I slid the frame back together.

09-13-2012, 06:49 PM	#15
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis You can see in some of the pics were I braced the frame with I-beams. The frame went together very easily. I then welded the frame just like the factory did.



Register or Log In To remove these advertisements.

09-13-2012, 06:52 PM	#16
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis The only other things that I had to shorten were the fuel lines, brake lines, and exhaust. The flanges were cut from the exhaust by the transmission. I shortened the pipes and re-welded the flanges back on.

09-13-2012, 07:00 PM	#17
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis The center of the 2003 frame drops down farther than a 67-72 frame. If you put a 67-72 body on a newer frame, the cab would sit alot lower than the bed. This is the problem with doing what I'm doing. My fix was removing the crossmembers from the bottum of the bed. This would drop the bed to the frame by about 3.5 inches. The cab will sit 5 inches above the frame, which sounds like a lot but if you look at a 2000's 2500HD truck about the same amount of frame is showing. Your not going to see through to the other side.

09-13-2012, 07:01 PM	#18
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis I bought some Hummer H2 wheels and tires. The tires are 35 inches. I'll post pics later of them on the truck.

09-13-2012, 07:03 PM	#19
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis

09-13-2012, 07:14 PM	#20
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Here's a pic of the mounts I made for the body. I used 3"X3"X1/4" square tubing and cut off one side to make a U. I bought a bushing kit from DIY4X.com. Which consists of a 2" sleeve bushing, a greasable bolt, and DOM tubing. The 3" tubing I made into a U was bolted to the front body mount bolt hole. This way all I had to do was weld a locking nut to the U, and drop a bolt in the original bolt hole in the body. Then I made a bracket to weld to the bushing DOM tube. The bracket will be welded to the frame. You know you did it right when you can use the same exact bracket on the other side of the truck. I made the bracket that holds the bushing out of 2"x3"X1/4" tubing.

09-13-2012, 07:17 PM	#21
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Driver side.

09-13-2012, 07:19 PM	#22
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 150	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Just wanted to say how helpful DIY4X.com is. They are a lifesaver. They have all kinds of things for us DIY people.

09-13-2012, 07:29 PM	#23
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Hey, this build sounds kinda familiar!!! __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

09-13-2012, 08:34 PM	#24
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Great work on it! It's looking really good! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-13-2012, 08:40 PM	#25
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis Awesome job man! Cant wait to see it finished! __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

Register or Log In To remove these advertisements.