Aftermaket Shoulder Belts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

culp7 · 02-27-2010, 10:48 PM

I was wondering how many of ya'll are runnin aftermarket shoulder seat belts??? I'd like to see some pics installed.

Thanks, Culp7

big_al_71 · 02-28-2010, 08:14 AM

I put them in my truck about a year and half ago, they work very good so far. My truck only had lap belts so I took them off and installed these.

darkhorse970 · 02-28-2010, 08:34 AM

Big Al, where did you buy your belts?

grs · 02-28-2010, 03:29 PM

OK big Al. The man wants to know where you bought the shoulder, lap belts. And so do I. So give it up.

MT71c-10 · 02-28-2010, 03:46 PM

I'm in.

**leddzepp** · 02-28-2010, 03:47 PM

www.gemstreetrods.com

He has the best prices for aftermarket lap/shoulder belts. They are the same ones all the vendors carry (brothers, lmc, etc) at a considerable difference in price.

hayhauler71 · 02-28-2010, 03:59 PM

Summit Racing

MT71c-10 · 02-28-2010, 04:03 PM

hayhauler71: How did you mount the back of the harness? To the gas tank area or did you fab something?

66skylarkpost · 02-28-2010, 04:52 PM

here's a post from a couple years ago about my 72 u.s. forestry truck the government put in shoulder belts http://67-72chevytrucks.com/vboard/s...=1#post2002965

mbgmike · 02-28-2010, 04:56 PM

For low prices

We sell several brands
Beams 3 point harness with buckle are $120.00 per set
Beams 3 point harness with push button $120.00 per set
passenger and drivers side with all mounting hardware

We sell other brands as well.

Beams are made in USA

hayhauler71 · 02-28-2010, 05:00 PM

Quote:

Originally Posted by MT71c-10

hayhauler71: How did you mount the back of the harness? To the gas tank area or did you fab something?

Steal plates in floor and reinforced back of seat to prevent back seat from collapsing in a crash. The main reason was to keep my kids safe when we went for a ride.

**leddzepp** · 02-28-2010, 05:00 PM

Wow...mbgmike's price is even lower. Buy from him instead and support a board vendor. The link I posted above is a guy local to me and he is a crusty old coot anyways

bubba35741 · 02-28-2010, 06:40 PM

When I built my 1970 back around 1998 I used S-10 factory belts in the Oem locations using the oem bolts. It has worked very well (not crash tested though!

. I have a early 90's full size chevy seat in it and they work nice.

Security guy · 02-28-2010, 07:04 PM

Those look like some nice belts mbgmike! And they are made in usa! I may be calling you to order some as soon as summer hits.

bubba35741 · 02-28-2010, 07:06 PM

Quote:

Originally Posted by Security guy

Those look like some nice belts mbgmike! And they are made in usa! I may be calling you to order some as soon as summer hits.

I agree.....that price sure beats walking through the junk yards! Plus they look nice.

mbgmike · 02-28-2010, 07:11 PM

Quote:

Originally Posted by bubba35741

I agree.....that price sure beats walking through the junk yards! Plus they look nice.

Quote:

Originally Posted by Security guy

Those look like some nice belts mbgmike! And they are made in usa! I may be calling you to order some as soon as summer hits.

here is a link to the Manufacturers site. We only have Black in stock

http://www.seatbelts.net/

MT71c-10 · 02-28-2010, 08:56 PM

My truck has the plug looking thing in the corner of the cab where the top of the shoulder belt would bolt to. How are you guys attaching the top of the shoulder belt?

**leddzepp** · 02-28-2010, 09:23 PM

Quote:

Originally Posted by MT71c-10

My truck has the plug looking thing in the corner of the cab where the top of the shoulder belt would bolt to. How are you guys attaching the top of the shoulder belt?

pull the plug

Seriously, the cab is threaded there for shoulder belts.

MT71c-10 · 02-28-2010, 09:27 PM

I have been told that, but I just wanted to make sure!

This means I finally get to get rid of my white seat belts.

Thanks leddzepp.

big_al_71 · 02-28-2010, 10:05 PM

Quote:

Originally Posted by grs

OK big Al. The man wants to know where you bought the shoulder, lap belts. And so do I. So give it up.

Quote:

Originally Posted by MT71c-10

I'm in.

Quote:

Originally Posted by darkhorse970

Big Al, where did you buy your belts?

hey guy I bought mine from www.classicparts.com

http://www.classicparts.com/searchprods.asp

02-27-2010, 10:48 PM	#1
culp7 HickTown Join Date: Apr 2009 Location: ANDOVER, Kansas Posts: 355	Aftermaket Shoulder Belts I was wondering how many of ya'll are runnin aftermarket shoulder seat belts??? I'd like to see some pics installed. Thanks, Culp7 __________________ 1993 Ford Mustang Vert w/ 2.3 1969 Chevy C/10 w/350 1968 Chevy C-20 w/250 1976 Dodge Aspen W/ 225 2000 Toyota Tundra w/4.7 1987 Dodge Ram D-100 w/360 255/70-15 ___________ (oo)══╬══(oo) ‾‾‾‾‾‾‾‾‾‾‾

02-28-2010, 08:14 AM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Aftermaket Shoulder Belts I put them in my truck about a year and half ago, they work very good so far. My truck only had lap belts so I took them off and installed these. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

02-28-2010, 08:34 AM	#3
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,105	Re: Aftermaket Shoulder Belts Big Al, where did you buy your belts? __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

02-28-2010, 03:29 PM	#4
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Re: Aftermaket Shoulder Belts OK big Al. The man wants to know where you bought the shoulder, lap belts. And so do I. So give it up. Last edited by grs; 02-28-2010 at 03:31 PM.

02-28-2010, 03:46 PM	#5
MT71c-10 Too many toys,not enough money Join Date: May 2008 Location: Bozeman,MT Posts: 237	Re: Aftermaket Shoulder Belts I'm in. __________________ Looking for all Montana members. PM me or send friend request.http://www.67-72chevytrucks.com/vboa...36#post3813336

02-28-2010, 03:47 PM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,019	Re: Aftermaket Shoulder Belts www.gemstreetrods.com He has the best prices for aftermarket lap/shoulder belts. They are the same ones all the vendors carry (brothers, lmc, etc) at a considerable difference in price. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

02-28-2010, 03:59 PM	#7
hayhauler71 Registered User Join Date: Aug 2009 Location: St. Paul MN. Posts: 1,996	Re: Aftermaket Shoulder Belts Summit Racing Attached Images

02-28-2010, 04:03 PM	#8
MT71c-10 Too many toys,not enough money Join Date: May 2008 Location: Bozeman,MT Posts: 237	Re: Aftermaket Shoulder Belts hayhauler71: How did you mount the back of the harness? To the gas tank area or did you fab something? __________________ Looking for all Montana members. PM me or send friend request.http://www.67-72chevytrucks.com/vboa...36#post3813336

02-28-2010, 04:52 PM	#9
66skylarkpost Registered User Join Date: Mar 2006 Location: kearney,nebraska Posts: 443	Re: Aftermaket Shoulder Belts here's a post from a couple years ago about my 72 u.s. forestry truck the government put in shoulder belts http://67-72chevytrucks.com/vboard/s...=1#post2002965 __________________ '70 k-10 longbox- mid 70's drivetrain 350/350 487x heads 10.1:1 flowmasters ,35's 3.73's auburn posi ,rear shackle flip. '72 short stepside U.S. forestry truck, '73 455 buick,400 turbo,dropped 2"-4 1/4" ,3.07 posi,:'89 silverado 1500 ,OK truck ,5.7 holley tbi ,trick 700r4 3.07 auburn posi ,and my '66 skylark ,'73 centurion and my '84 monte carlo imca stock car

02-28-2010, 04:56 PM	#10
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Aftermaket Shoulder Belts For low prices We sell several brands Beams 3 point harness with buckle are $120.00 per set Beams 3 point harness with push button $120.00 per set passenger and drivers side with all mounting hardware We sell other brands as well. Beams are made in USA Attached Images Last edited by mbgmike; 02-28-2010 at 05:46 PM. Reason: added pics

02-28-2010, 05:00 PM	#12
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,019	Re: Aftermaket Shoulder Belts Wow...mbgmike's price is even lower. Buy from him instead and support a board vendor. The link I posted above is a guy local to me and he is a crusty old coot anyways __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

02-28-2010, 06:40 PM	#13
bubba35741 Registered User Join Date: Sep 2009 Location: Ryland Alabama Posts: 97	Re: Aftermaket Shoulder Belts When I built my 1970 back around 1998 I used S-10 factory belts in the Oem locations using the oem bolts. It has worked very well (not crash tested though! . I have a early 90's full size chevy seat in it and they work nice. Attached Images Last edited by bubba35741; 02-28-2010 at 07:03 PM.

02-28-2010, 07:04 PM	#14
Security guy Registered User Join Date: Mar 2008 Location: Sarasota, Fl. Posts: 441	Re: Aftermaket Shoulder Belts Those look like some nice belts mbgmike! And they are made in usa! I may be calling you to order some as soon as summer hits.

02-28-2010, 08:56 PM	#17
MT71c-10 Too many toys,not enough money Join Date: May 2008 Location: Bozeman,MT Posts: 237	Re: Aftermaket Shoulder Belts My truck has the plug looking thing in the corner of the cab where the top of the shoulder belt would bolt to. How are you guys attaching the top of the shoulder belt? __________________ Looking for all Montana members. PM me or send friend request.http://www.67-72chevytrucks.com/vboa...36#post3813336

02-28-2010, 09:27 PM	#19
MT71c-10 Too many toys,not enough money Join Date: May 2008 Location: Bozeman,MT Posts: 237	Re: Aftermaket Shoulder Belts I have been told that, but I just wanted to make sure! This means I finally get to get rid of my white seat belts. Thanks leddzepp. __________________ Looking for all Montana members. PM me or send friend request.http://www.67-72chevytrucks.com/vboa...36#post3813336 Last edited by MT71c-10; 02-28-2010 at 09:28 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.