The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-25-2010, 10:08 PM   #1
austinstocker
Registered User
 
austinstocker's Avatar
 
Join Date: Jul 2009
Location: Enumclaw, WA
Posts: 49
1971 C10 Tubular Control Arms Questions, Anyone?

I have a 71 C10, around 6 inches of drop in the front and 5 1/2 in the back. It has 15x8 Rally's in the front and 15x10 in the back.

Here is the issue... I put some 2 1/2 inch drop spindles in the front (to get it to the roughly 6 inches) and I am now having a very bad clearance issue between the inside of the front wheels and the lower control arms (factory stamped style) when steering.

Has anyone out there run into this same issue? And if so, has anyone attempted to install tubular control arms in the front and successfully fixed the clearance issue? Just wanted to get an input before spending the pretty penny.

Thanks.
__________________
____________________________
1967 C10 SWB Big Block 4 Speed
austinstocker is offline   Reply With Quote
Old 01-25-2010, 10:19 PM   #2
austinstocker
Registered User
 
austinstocker's Avatar
 
Join Date: Jul 2009
Location: Enumclaw, WA
Posts: 49
Re: 1971 C10 Tubular Control Arms Questions, Anyone?

Actually... about 5 1/2 Front and rear.
__________________
____________________________
1967 C10 SWB Big Block 4 Speed
austinstocker is offline   Reply With Quote
Old 01-25-2010, 10:48 PM   #3
big_al_71
Registered User
 
big_al_71's Avatar
 
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
Re: 1971 C10 Tubular Control Arms Questions, Anyone?

I am sure someone will chime in, but I know that you can grind the lip of the lower control arm and you will have enough clearance.
__________________
Get your facts first, and then you can distort them as much as you please!!!!!.



Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild
big_al_71 is offline   Reply With Quote
Old 01-26-2010, 11:16 AM   #4
austinstocker
Registered User
 
austinstocker's Avatar
 
Join Date: Jul 2009
Location: Enumclaw, WA
Posts: 49
Re: 1971 C10 Tubular Control Arms Questions, Anyone?

I actually already did that. But shortly after bottomed the arms out on the street in a huge dip. They are tweaked beyond repair, so looking for a good alternative with more overall clearance both to the street and during steering. Thanks for the input.
__________________
____________________________
1967 C10 SWB Big Block 4 Speed
austinstocker is offline   Reply With Quote
Reply

Bookmarks

Tags
drop, lower, lowering, spindle, tubular


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:59 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com