Anybody interested in this 350 block? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69c10stepside · 03-23-2003, 09:05 PM

Since i dont know if i want to get rid of it, i decided i better had put it in the message board instead of the parts board.. here goes.. I have a numbers matching std. bore 350 four bolt main block (bare block) for a '69 c10-c30. Here is the vin number on the block VII27WK, and the casting number is 3932386. Anybody interested in it? It might be usable at std. bore, most of the rust in the cyl. bores rubbed off with wd-40, but it should clean up at anything past std.

03-23-2003, 09:05 PM	#1
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	Anybody interested in this 350 block? Since i dont know if i want to get rid of it, i decided i better had put it in the message board instead of the parts board.. here goes.. I have a numbers matching std. bore 350 four bolt main block (bare block) for a '69 c10-c30. Here is the vin number on the block VII27WK, and the casting number is 3932386. Anybody interested in it? It might be usable at std. bore, most of the rust in the cyl. bores rubbed off with wd-40, but it should clean up at anything past std. __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.