71/72 throttle linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lts70 · 02-24-2010, 04:12 PM

I bought a gas pedal conversion plate from LFD to switch over my 70 gas pedal to the 71/72 set up. I have found the pedal assembly but do not have the cable that hooks it up to the carb linkage. Does anyone have a Napa part number for this or is it a LMC item?

Also it is missing the stainless steel surround. Can you still get those?

gcburdic · 02-24-2010, 04:27 PM

might want to order up the lokar cable setup...seen a couple guys do this and it looks good....check with member 'sinister' and 'hart rod' they both have done a little write up on it too...I'll see if I can find the thread

BLACK AND BLUE 67-72 · 02-24-2010, 04:32 PM

610-1417 24" LONG

610-1426 21.375" LONG

Both are Napa Numbers.

lts70 · 02-24-2010, 07:19 PM

I have a Edelbrock 650 performer carb. Do you think I will need the 24" or 21.375" long cable?

I tried seaching for the lokar linkage but had no luck. I bet the look good.

Sinister · 02-24-2010, 07:36 PM

The Lokar stuff is spendy, but I had to go with it because I had a Lokar kickdown setup already . Here's a link with pics: http://67-72chevytrucks.com/vboard/s....php?p=3810086

lts70 · 02-25-2010, 10:47 AM

Do I need to buy anything besides the cable to run the stock cable set up? Like any brackets that bolt to the manifold to hold the cable from moving? I still can’t find any info on what length I need as well. Any help would be appreciated.

Sinister · 02-25-2010, 11:08 AM

You'll need a carb bracket. Don't know if those lengths listed are housing or cable lengths. Can't help there. It'll depend on your setup, intake, carb, motor location. The nice thing about the Lokar setup is it's custom fit and adjustable. I used a 24" Lokar cable and had to cut it down to size. Good luck.

**Hart_Rod** · 02-25-2010, 12:01 PM

Quote:

Originally Posted by lts70

I bought a gas pedal conversion plate from LFD to switch over my 70 gas pedal to the 71/72 set up. I have found the pedal assembly but do not have the cable that hooks it up to the carb linkage. Does anyone have a Napa part number for this or is it a LMC item?

Also it is missing the stainless steel surround. Can you still get those?

I've got an extra cable I'll send to you for $10. LMK

Camaro_nut2001 · 02-25-2010, 12:52 PM

Quote:

Originally Posted by Hart_Rod

I've got an extra cable I'll send to you for $10. LMK

Hello Hart_Rod, if he doesn't want or need the cable I could use it on my upgrade that i'm doing. Thank you

**Hart_Rod** · 02-25-2010, 01:17 PM

Quote:

Originally Posted by Camaro_nut2001

Hello Hart_Rod, if he doesn't want or need the cable I could use it on my upgrade that i'm doing. Thank you

I've got 2 of them.

lts70 · 02-26-2010, 02:17 PM

Quote:

Originally Posted by Hart_Rod

I've got an extra cable I'll send to you for $10. LMK

Does that include the carb bracket and shipping?

**Hart_Rod** · 02-26-2010, 02:23 PM

Quote:

Originally Posted by lts70

Does that include the carb bracket and shipping?

No carb bracket. Add a couple $ for shipping.

**72K20** · 02-26-2010, 04:20 PM

I'll take the other one if it's still available? Moved my engine forward when I put in the 700R4 and have been goofing with throttle cables ever since.

02-24-2010, 04:12 PM	#1
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,037	71/72 throttle linkage I bought a gas pedal conversion plate from LFD to switch over my 70 gas pedal to the 71/72 set up. I have found the pedal assembly but do not have the cable that hooks it up to the carb linkage. Does anyone have a Napa part number for this or is it a LMC item? Also it is missing the stainless steel surround. Can you still get those? __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.

02-24-2010, 04:27 PM	#2
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 71/72 throttle linkage might want to order up the lokar cable setup...seen a couple guys do this and it looks good....check with member 'sinister' and 'hart rod' they both have done a little write up on it too...I'll see if I can find the thread __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

02-24-2010, 04:32 PM	#3
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: 71/72 throttle linkage 610-1417 24" LONG 610-1426 21.375" LONG Both are Napa Numbers. __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

02-24-2010, 07:19 PM	#4
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,037	Re: 71/72 throttle linkage I have a Edelbrock 650 performer carb. Do you think I will need the 24" or 21.375" long cable? I tried seaching for the lokar linkage but had no luck. I bet the look good. __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.

02-24-2010, 07:36 PM	#5
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: 71/72 throttle linkage The Lokar stuff is spendy, but I had to go with it because I had a Lokar kickdown setup already . Here's a link with pics: http://67-72chevytrucks.com/vboard/s....php?p=3810086 __________________ Beat it to fit, Paint it to match... Last edited by Sinister; 02-24-2010 at 07:38 PM.

02-25-2010, 10:47 AM	#6
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,037	Re: 71/72 throttle linkage Do I need to buy anything besides the cable to run the stock cable set up? Like any brackets that bolt to the manifold to hold the cable from moving? I still can’t find any info on what length I need as well. Any help would be appreciated. __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.

02-25-2010, 11:08 AM	#7
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: 71/72 throttle linkage You'll need a carb bracket. Don't know if those lengths listed are housing or cable lengths. Can't help there. It'll depend on your setup, intake, carb, motor location. The nice thing about the Lokar setup is it's custom fit and adjustable. I used a 24" Lokar cable and had to cut it down to size. Good luck. __________________ Beat it to fit, Paint it to match...

02-26-2010, 04:20 PM	#13
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: 71/72 throttle linkage I'll take the other one if it's still available? Moved my engine forward when I put in the 700R4 and have been goofing with throttle cables ever since. Last edited by 72K20; 02-26-2010 at 04:21 PM. Reason: addition



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.